Hey Bill, thanks for reaching out! The Optronics Smoke Lens ID Light Bar #OPT55KB doesn't have Lumen or Candela ratings according to my contact at Optronics. I will say that this will be about the equivalent of a light on your vehicle. So there…
Hey Chris, in the instructions for the B and W Turnoverball gooseneck hitch part #BW73FR that you referenced it says that the inner brackets are not needed if the truck has the inner brackets for the OEM hitch already welded to the truck frame. In…
Hey Raymond, since the 5k rated etrailer jack part #e55ZV is rated higher than the 3.5k option you also mentioned it will work a little bit quicker since it won't be working quite as hard. With that said it's not a fast jack by any means. It…
The outside diameter of the 2" Round Grommet #A54GB you referenced is 2-3/4". This grommet is used with 2" round lights such as the GloLight LED #MCL155RB (Red) or GloLight LED #MCL155AB (Amber). You will also need a 2-wire pigtail to…
I recommend mounting the Low Profile LED Flood Light #OPT64FR on the upper frame of your trailer. This light is 2" tall and will broadcast the light down at a 45 degree angle. The housings are made of aluminum to help protect the light from…
Hello Eric, The #K2R35DKG is Dacromet-coated, and the calipers are treated with KodaGuard. The #K2R35DS, on the other hand, is made entirely of stainless steel, hence the higher price. If you're in an area where road salt is common or if…
Hey Wes, I’d avoid it. All of the battery heaters we carry, such as the 50w #ZE77FR, 80w #ZE87FR, and 160w #ZE27FR Zerostart pads, are not recommended for lithium-ion batteries because they heat too directly on the case. Lithium cells need…
There is always a way to make it work. I can't recommend doing that as I have not tested it and I do not offer a product like that with the exception of the Dexter Trailer Springs Over-Under Conversion Kit part #K71-384-00. This will give you a…
Hi Sean; we only sell replacement parts for this setup at this time so we do not have every part you need. We have the leg #e93VV and the Replacement Power Unit for etrailer and Ram Hydraulic Trailer Jacks and Scissor Hoist Systems #e43VV. The…
The Stackers part #A10-0920 can be used under jacks/stabilizers but can also be used under the wheels of a vehicle to level. I attached a picture that shows this as well.
Hey Bill, thanks for reaching out! The Optronics Smoke Lens ID Light Bar #OPT55KB doesn't have Lumen or Candela ratings according to my contact at Optronics. I will say that this will be about the equivalent of a light on your vehicle. So there…
Hey Chris, in the instructions for the B and W Turnoverball gooseneck hitch part #BW73FR that you referenced it says that the inner brackets are not needed if the truck has the inner brackets for the OEM hitch already welded to the truck frame. In…
Hey Raymond, since the 5k rated etrailer jack part #e55ZV is rated higher than the 3.5k option you also mentioned it will work a little bit quicker since it won't be working quite as hard. With that said it's not a fast jack by any means. It…
The outside diameter of the 2" Round Grommet #A54GB you referenced is 2-3/4". This grommet is used with 2" round lights such as the GloLight LED #MCL155RB (Red) or GloLight LED #MCL155AB (Amber). You will also need a 2-wire pigtail to…
I recommend mounting the Low Profile LED Flood Light #OPT64FR on the upper frame of your trailer. This light is 2" tall and will broadcast the light down at a 45 degree angle. The housings are made of aluminum to help protect the light from…
Hello Eric, The #K2R35DKG is Dacromet-coated, and the calipers are treated with KodaGuard. The #K2R35DS, on the other hand, is made entirely of stainless steel, hence the higher price. If you're in an area where road salt is common or if…
Hey Wes, I’d avoid it. All of the battery heaters we carry, such as the 50w #ZE77FR, 80w #ZE87FR, and 160w #ZE27FR Zerostart pads, are not recommended for lithium-ion batteries because they heat too directly on the case. Lithium cells need…
There is always a way to make it work. I can't recommend doing that as I have not tested it and I do not offer a product like that with the exception of the Dexter Trailer Springs Over-Under Conversion Kit part #K71-384-00. This will give you a…
Hi Sean; we only sell replacement parts for this setup at this time so we do not have every part you need. We have the leg #e93VV and the Replacement Power Unit for etrailer and Ram Hydraulic Trailer Jacks and Scissor Hoist Systems #e43VV. The…
The Stackers part #A10-0920 can be used under jacks/stabilizers but can also be used under the wheels of a vehicle to level. I attached a picture that shows this as well.
Illuminate Your Workspace with Reliable Work Lights
Work lights are essential for any enthusiast needing reliable illumination in various settings, from trailers to service bodies. Consider the light's brightness, durability, and mounting options. Whether you're upgrading from incandescent to LED or adding auxiliary lights, there's a perfect work light for every need.
LED work lights offer brighter illumination, energy efficiency, and longer lifespan compared to incandescent lights. They're perfect for tasks requiring clear visibility, like backing up trailers or lighting up workspaces. Plus, they often come with improved mounts and are easier to install.
Work lights are designed to withstand tough conditions. Many feature durable housings and mounts that can handle vibrations and impacts, making them ideal for use on trailers, trucks, and off-road vehicles. However, it's important to ensure proper installation to prevent damage.
Absolutely! Work lights are versatile and can be mounted on vehicles like trucks, trailers, and boats, or used in stationary setups like workshops and garages. Their adaptability makes them a great choice for various lighting needs, providing ample illumination wherever required.
Consider the light's brightness, beam pattern, and mounting options. Ensure it fits your vehicle's setup and provides adequate illumination for your needs. Look for features like built-in switches for convenience and check reviews for insights on performance and durability.
When installing work lights, ensure a secure mount to prevent movement during use. Avoid pressure washing the lights to maintain their integrity. For vehicle installations, check compatibility with existing connectors and consider professional installation for optimal results.
Filters
