Hey Bill, thanks for reaching out! The Optronics Smoke Lens ID Light Bar #OPT55KB doesn't have Lumen or Candela ratings according to my contact at Optronics. I will say that this will be about the equivalent of a light on your vehicle. So there…
Hey, Mark! That’s a great question! I took a look at the Maxxis tire and wheel combo, part #MXS67FR, and they measure 27" in diameter. We size our tire covers based on the actual tire size, not the cover itself. The etrailer tire cover, part…
Hey Raymond, since the 5k rated etrailer jack part #e55ZV is rated higher than the 3.5k option you also mentioned it will work a little bit quicker since it won't be working quite as hard. With that said it's not a fast jack by any means. It…
Hi Chris! I would be shocked if the wheels have a 5 on 5 bolt pattern. I don't think I have ever seen a 12" wheel with that bolt pattern. They will typically have a 5 on 4-1/2 bolt pattern and I would encourage you to have him look at the…
Hello Eric, The #K2R35DKG is Dacromet-coated, and the calipers are treated with KodaGuard. The #K2R35DS, on the other hand, is made entirely of stainless steel, hence the higher price. If you're in an area where road salt is common or if…
I recommend mounting the Low Profile LED Flood Light #OPT64FR on the upper frame of your trailer. This light is 2" tall and will broadcast the light down at a 45 degree angle. The housings are made of aluminum to help protect the light from…
I have attached a photo for you that shows how a 7-way trailer connector is wired. If you take a look at the trailer side trailer connector you will see a terminal labeled "12V Power". If you were to run a wire part #10-1-1 (per foot) from…
I can definitely understand your frustration as the Fulton F2 Swing-Up Trailer Jack with Dual 7" Wheels, Sidewind -1,600 lbs F1413100334 is not a cheap jack so it would be nice to replace the plastic housing part number 9 in the included diagram…
The DeeZee Specialty Series Trailer Tongue Tool Box item #DZ91716 measures 34" long in the back, 16" long in front, 14-1/4" wide and 18" tall. The lid measures 36" long in the back, is 15" wide, and adds 1" to the…
Illuminate Your Space with Recessed Mount Work Lights
Recessed mount work lights are perfect for those looking to add subtle yet effective lighting to their projects. Ideal for interior use, these lights offer a sleek, integrated look. While not suited for exterior use due to lack of gasketing, they can be upgraded with LED bulbs for brighter illumination.
Recessed mount work lights provide a clean, integrated look, making them ideal for interior applications. They are perfect for areas where you need light without distraction. While they are dimmer, swapping the bulb for an LED can enhance brightness, making them versatile for various settings.
These lights are not recommended for outdoor use as they lack gasketing to prevent water ingress. They excel indoors where moisture isn't a concern, providing reliable lighting in dark spaces or as subtle ambient lighting.
Installation is straightforward, especially if you have existing grommets. Simply unplug the old lights and plug in the new ones. They come with hardware suitable for most applications, making them a convenient choice for DIY enthusiasts.
While they are generally dimmer, they are suitable for applications where you need light without distraction. For brighter needs, replacing the included bulb with an LED equivalent can significantly enhance their output, making them adaptable to various lighting requirements.
These lights offer a great balance of quality and cost. Compared to more expensive brands, they provide similar performance and aesthetics at a more affordable price. Their versatility and ease of installation add to their value, making them a smart choice for budget-conscious buyers.
Filters
