Hey Dave, thanks for the pictures! Based on what you have and what you are looking for the Tie Down Spare Tire Mount part #TD66FR that you referenced would be a great option. This is very similar to what you have now so it would do a great job.
Hi Frank, While we can get you a brake controller for your 2020 Chevy Colorado, there isn't a plug-in option and harness because the truck doesn't have a plug under the dash. That said, the wires are already run to the cab, so it isn't…
Hello Dale, thanks for reaching out. We do have a few options for an exterior utility/loading light. Take a look at the following: - Gustafson 12V LED RV and Utility Light - 8" Long - Black #277-000493 - Opti-Brite LED Interior Strip Light -…
Hey George. The Power Mountain Tallboy Off-Road Bottle Jack item #PM34FR is only rated for 6-tons but it's not like you're raising up the entire motorhome. Most of the weight is going to be on the back though and since it is a dually, I…
Hey Gwen! The distance from the center of the mounting hole to the bottom of the Trailer Valet JX Trailer Jack #TV35FR when fully retracted is 13.44". If you’re measuring from the bottom of the pipe mount instead of the center of the hole, that…
Hello Rhonda, thanks for reaching out. Yes, we do offer both front and rear mud flaps for the 2024 Chevy Colorado Trail Boss with fender flares. For that I recommend the following: - WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front…
Hey Ed, yes the solenoid of the reverse lock out is going to click when it is activated. You would definitely be able to hear it too. Have you tried this already?
Hi Henry; the Power Mountain Tallboy Off-Road Bottle Jack #PM34FR you were looking at will work well for your Cybertruck. This has a 6 ton weight capacity which will be more than enough to handle your truck and a lift range of 8-1/2" to…
Hey Anthony! The outer diameter of the weld-on pipe coupling on the Trailer Valet JX Trailer Jack #TV35FR is 2.01". I went ahead and attached some dimensional drawings below for your reference. What kind of trailer do you have?
Hey Bill, thanks for reaching out! The Optronics Smoke Lens ID Light Bar #OPT55KB doesn't have Lumen or Candela ratings according to my contact at Optronics. I will say that this will be about the equivalent of a light on your vehicle. So there…
Hey Chris, in the instructions for the B and W Turnoverball gooseneck hitch part #BW73FR that you referenced it says that the inner brackets are not needed if the truck has the inner brackets for the OEM hitch already welded to the truck frame. In…
Yes The Ultra Bright LED Flood Light #3371492196 can be used as a backup light when connecting to your reverse blue wire from the 7 plug, but you need to make sure that the circuit can handle the power of the light. Each light runs 6.25 amps, since…
In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!
Illuminate Your Projects with Peterson Work Lights
Peterson work lights are perfect for interior applications where subtle lighting is needed. They're easy to install and can be customized with LED bulbs for brighter illumination. Ideal for truck bed systems or dark spaces, these lights offer practical solutions for enthusiasts seeking reliable interior lighting.
Peterson work lights provide a soft glow, suitable for interior use where you need light without distraction. If you need more brightness, you can easily swap the included bulb for an LED equivalent, enhancing the light output significantly.
Yes, installing Peterson work lights in a truck bed is straightforward. You can wire them using a waterproof toggle switch or a magnetic switch for automatic operation. They can be connected to your bed lighting or a constant 12vdc source at the trailer harness.
Peterson work lights are not ideal for outdoor use as they lack gasketing to prevent water ingress. They excel in interior settings where moisture isn't a concern, providing reliable lighting for various applications.
Peterson work lights are versatile for many interior applications. They're great for illuminating truck bed cargo systems, dark storage areas, or any space where you need a bit of light without overwhelming brightness. Their adaptability makes them a favorite among DIY enthusiasts.
Enhance Peterson work lights by integrating them with magnetic switches for automatic on/off functionality. This setup is perfect for drawers or compartments, turning the lights on when opened and off when closed, adding convenience and efficiency to your lighting setup.
Work Lights Parts or Accessories
Filters
