See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

• Tor-Flex Lift Kit that Fits 2015 Little guy Silver Shadow 5x10
  Can you get me the brand of axle you have? I believe you might have an AL KO axle which we won't be able to help you with but if you have a Dexter or Lippert torsion style axle we can get you a lift for it.
  view full answer...
• Trailer Hitch and Brake Controller Recommendation for 1999 Jeep Wrangler TJ
  What year Wrangler do you have? (follow up posted below)
  view full answer...
• 7-Way Trailer Wiring Recommendation for 2002 Jeep Wrangler
  You will need to start with a 4-way (if you do not have one). For that you would want the # 118409. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way and install a brake controller. For a brake controller I would recommend the Prodigy P2 Brake Controller...
  view full answer...
• Can the Fuel Tank Be Removed from 2001 Jeep TJ With Curt Trailer Hitch Receiver 13408 Installed
  From what I have found, there are four bolts holding the fuel tank in place at the back of your 2001 Jeep TJ. The Curt Trailer Hitch Receiver # 13408 covers these bolts once it is installed, so it would have to be uninstalled in order to access them and remove your fuel tank. I recommend the Curt Trailer Hitch Receiver # 13430 instead. This hitch sits slightly further back, leaving those bolts accessible. There should be plenty of clearance to remove the fuel tank, although it may make...
  view full answer...
  
• Recommended Timbren Axle-Less System And Electric Trailer Brakes For M416 Trailer
  I would be happy to recommend the correct Timbren axle-less system and electric trailer brake setup for the M416 trailer you are rebuilding. Starting with the Timbren system I recommend the 2000lb system # ASR2KHDS02 which will be plenty highly rated for your trailer and cargo, and is designed for wide tires like what you'd typically find on a M416 trailer like yours. Since the wheels that are used on the M416 trailer have a 5 on 5.5 bolt pattern, I recommend two of the Trailer Hub and...
  view full answer...
• Troubleshooting Wrong Trailer Wiring Harness Being Used on a 2000 Jeep Wrangler
  You are correct, the Plug-N-Tow (TM) Vehicle Wiring Harness, item # 32625, only plugs into a connection point on the driver side on the vehicles it is confirmed as a fit for. This is because Jeep has already run all the necessary wires to that port for you, so you do not have to run the wires across yourself, as you would have to with other models that plug into both the driver and passenger taillights. The issue you are experiencing is due to the fact that this harness is designed for...
  view full answer...
• Trailer Wiring Harness Recommendation for a 2006 Jeep Wrangler Unlimited LJ
  From what I was able to learn about the 2006 Jeep LJ, from 2004 to 2006 LJ was the unlimited version and had a 10 inch longer wheel base. Both can fall under the umbrella of a Wrangler so you will be able to use Tow Ready Custom Fit Vehicle Wiring, # 118409. I have included a link to the installation details and a video showing a typical installation on a 2006 Jeep Wrangler for reference.
  view full answer...
• Replacement Wishbone Trailer Connector To Replace 6-wire Connector
  Your trailer connector is considered a wishbone connector. A wishbone connector splits the running light circuit into two separate wires. Instead of a single brown wire carrying the running light circuit, you have a wire for running lights on the right side of the trailer and another wire for left side running lights. Then you have a wire carrying the left turn/brake light circuit, wire for right turn/brake light circuit and white wire for ground. Since your connector has 6 wires you probably...
  view full answer...
  
• Parts Needed to Install 7-Way Trailer Wiring Harness in 2005 Jeep Wrangler
  The reason the wiring harness of the Hopkins 7-Way Kit part # HM40975-11933 seems short is because it's for connecting to existing trailer wiring on your 2005 Jeep Wrangler. If your Wrangler did not have a 7-way present at the rear of it then this would not work. You will need to start with a 4-way (if you do not have one). For that you would want the # 118409. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way....
  view full answer...
• Trailer Hitch Receiver Fit For 1998 Jeep TJ
  There is a 2 inch hitch that fits your 1998 Jeep TJ, but the # C13900 does not fit; instead, you can use the following: - etrailer Trailer Hitch Receiver # e43AR Then to add a 4-way, the correct fit is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118409 with Mounting Bracket # 18144.
  view full answer...
• Recommended Brake Controller Wiring For 2006 Jeep Wrangler
  There is no brake controller plug-in adapter available for your Jeep so it will have to be hardwired. The Draw-Tite Activator Trailer Brake Controller, part # 5504, is a time-delayed brake controller. You set the braking force you want and when you press your brake pedal that amount of braking force is applied to the trailer brakes. You will also need part # 20127. This is the pigtail that plugs into the brake controller harness and then is hardwired to the Jeep wiring under the dash. ...
  view full answer...
  
• Parts Needed To Install Trailer Brake Controller in 2004 Jeep Wrangler
  Your 2004 Jeep Wrangler does not have a factory brake controller port, but you can still install a trailer brake controller so don't worry! Instead you'll need a few extra component depending on how your Jeep left the factory. If it has a factory 7-way connector you'll just need a trailer brake controller like the highly regarded Tekonsha Prodigy P3 # 90195 with the install kit # 5506. If you don't have a factory 7-way you'll need a 4-way connector # 118409, 7-way connector # ETBC7,...
  view full answer...
• Tips for Installing a Trailer Wiring Harness on a 2005 Jeep Wrangler
  When installing a trailer wiring harness such as # 118409 on your 2005 Jeep Wrangler the connection on the passenger's side of the vehicle is a little harder to get to. Instead of reach in from underneath to find it like on the driver's side, try reaching in from the side of the vehicle up near the bumper. I have included a link to a different video, installation is the same, but it is a little clearer than the video on the 2005.
  view full answer...
• Flat Tow and Trailer Wiring Needed for 2003 Jeep Wrangler TJ
  The wiring needed for flat towing and trailer towing are going to be two separate harnesses. Let's start with the wiring needed to flat tow your 2003 Jeep TJ behind your RV. For this you can use Roadmaster Universal Hy-Power Diode Wiring Kit, # RM-154. The Roadmaster Universal Hy-Power Diode Wiring Kit, # RM-154, is designed for RVs with a 4-way flat. If your RV is equipped with a 7-way, you will also need the Blue Ox 7-Wire to 6-Wire Coiled Electrical Cord, # BX88206. In this case you...
  view full answer...
• Parts Needed to Install 7-Way on 2005 Jeep Wrangler without Trailer Wiring
  To install a 7-way on your 2005 Jeep Wrangler that did not have one you'd first need to start with a 4-way (if you didn't have one) with the part # 118409 and then convert it to a 7-way with the part # 37185 if you don't have a trailer with trailer brakes. If your trailer does have brakes you'd need the # ETBC7 instead with a brake controller like the Brake EVN # TK63VR.
  view full answer...
• Wiring Fit and Compatibility on a 2006 Jeep Wrangler-X
  If you don't have a factory 7-way already on your vehicle the Hopkins wiring harness # 32625, the Tow Ready # 118409, or the Curt # C55363 will fit for your 2006 Jeep Wrangler-X. I recommend the Tow Ready # 118409, because it is the most popular among our customers. I have linked all the wiring harnesses that fit a 2006 Jeep Wranger-X without the factory tow package for your vehicle for your convenience.
  view full answer...
• Passenger Side Wiring Harness Connection Location on a 2004 Jeep Wrangler
  We have video (see link) of the T-One Vehicle Wiring Harness, item # 118409, being installed on a 2004 Jeep Wrangler. You will see that the connection on the passengers side is located above a rubber covering just below the rear taillight. You will need to pull that rubber cover back out of the way to find it. Sometimes the connector is pushed up and out of easy view or covered with some thick tape so you will need to feel around a bit for it. You do have the right part.
  view full answer...
• Which Trailer Wiring Harness To Use On A 2000 Jeep TJ Wrangler Sport
  Both the Tow Ready T-One Wiring Harness # 118409 and the Hopkins Plug-N-Tow Wiring Harness # 42615 will work on your 2000 Jeep TJ Wrangler Sport. The difference is what you mentioned, how they install to the vehicle. The Tow Ready harness uses T-One connectors that will plug into connectors on each side of the vehicle. The connectors are located under the Jeep, behind the rear bumper. The white ground wire will need to be attached to a good,clean ground on the vehicles metal frame. The...
  view full answer...
• Recommended Trailer Wiring For 2002 Jeep TJ
  Since you have no wiring on yoru 2002 TJ we can get you everything you need. First you will need to install a 4-way wirinig harness. I recommend the T-One Vehicle Wiring Harness, part # 118409. This simply installs to the connection points located under the rear bumper on both the driver and passenger side. If your trailer has brakes then you will also need a brake controller so that the braking action in your Jeep activates the brakes on the trailer. The brake controller I recommend...
  view full answer...
  
• Does Trailer Hitch Receiver for 2003 Jeep TJ Come With Wires
  The Curt Trailer Hitch Receiver # 13408 that fits your 2003 Jeep TJ does not come with a trailer wiring harness or any wiring, which is something that you would have to get separately. For that, the correct part is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118409. I've added links to some instructions and video installs for you to check out.
  view full answer...
• Troubleshooting a T-One Tow-Ready Hitch Wiring Adapter # 118409 Not working Properly
  If the vehicle lighting is working properly with the trailer wiring harness # 118409, installed and no trailer connected, the problem could be that you have the wires from the harness connected on the wrong sides of the vehicle or you have a problem with the wiring on the trailer. I suspect that there is a bad ground connection on the trailer and that when the trailer is connected the problems that arise will go away when the ground fault is corrected. Check the connection of the white...
  view full answer...
• Trailer Wiring and Hitch Recommendation for a 1999 jeep Wrangler
  Basically, there are 2 different ways on which you can install trailer wiring on a 1999 Jeep Wrangler. The Tow Ready Custom Fit Vehicle Wiring, # 118409, plugs in line with the wiring behind the vehicle tail lights. Installation may take a little longer than the other harness but these types of connections are popular and work well. I have included a link to the installation details and a video showing a typical installation for you. The Hopkins Harness, # 42615, plugs into a connector...
  view full answer...
• Complete Trailer Towing/Flat Towing Setup For A 2004 Jeep Wrangler
  When you flat tow your 2004 Jeep Wrangler, you'll be connected to your tow vehicle via a 6-way cable located in the front, and not at the rear. With that being said, all you'll need for flat towing wiring, is a kit like the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles # RM-152-98146-7. This kit will include everything needed to give your vehicle a 6-way connector which will provide your toad with your RV's tail, brake, and turn signal lights. At the rear of the vehicle,...
  view full answer...
• Brake Controller Install on 2001 Jeep Wrangler
  To install a brake controller on your 2001 Jeep, you will first need the T-1 Connector, part # 118409 if your Jeep does not already have a 4-way trailer connector. You will also need the Brake Controller Installation Kit, part # ETBC6 if you need a 6-way trailer connector, or part # ETBC7 if you need the 7-way. The install kits contain everything necessary for installing a brake controller on your vehicle. Finally, you will need to choose a brake controller. I would recommend the Tekonsha...
  view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?