Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
You shouldn't have to climb into the cargo area just to pull a cooler from behind your bins. This slide-out tray brings cargo out of your rig so you can grab what you need. Bolts to factory mounting points with included hardware.
When your cargo area is loaded with a cooler, tool case, recovery gear, or a kitchen setup, reaching the items behind it can turn into climbing in or unloading half the back. This sliding tray pulls your stored gear out to the rear opening, giving you full slide-out access instead of forcing you to reach deep into the cargo space. Loading, grabbing, and packing back up take less effort because the gear comes out to where you're standing.
The tray gives your cargo setup a dedicated platform for planned loads like storage bins, coolers, tools, recovery gear, or camp kitchen items. Its 31-1/2" wide x 26-1/2" deep deck gives you a defined space to arrange the items you need to reach often, while the 250 lbs capacity provides plenty of support. Your gear stays within reach and the cargo area works better for packed trips where the same items get opened again and again.
A slide tray can become a problem if it blocks the storage spaces and tie-down points you still use. This tray is compatible with underfloor storage and factory tie-down points, so your cargo area keeps those practical features in play after the tray is mounted. You can organize gear on the platform while still working around the cargo features that help keep your setup useful.
Loaded gear feels very different from an empty tray, especially when you're pulling out dense tools, a packed cooler, or camp supplies. The heavy-duty slide mechanism is made for regular use, and the tray mounts securely to the cargo floor to support stable operation. The tray moves the weight out where you can handle it, making repeated access during trips feel more controlled and practical.
Installing a cargo tray is a lot easier to commit to when you don't have to drill into the cargo floor. The bolt-on kit uses existing mounting locations, giving your setup a secure mounting path without permanent modification. Once it's installed, the tray is fixed to the cargo floor for stable operation and your vehicle isn't locked into a one-way modification.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone, Steve here with etrailer. Let's take a look at the MORryde cargo area sliding tray for our Jeep Wrangler JLs. So folks, this is a couple of JL Wranglers and regular Wrangler, so make sure you're double-checking the figure out here at etrailer. Be sure you're getting the right one for your Jeep Wrangler. Now, what's neat about this product is this is gonna be a full, flat out access tray in the rear compartment area of that Jeep. So I do want to go ahead and go ahead and pull this out.
You have a blue lever on both sides and we pull that down. At that point, you can literally slide this out from the backside, obviously, all the way a full, and then as you heard it, it locked out. Now I'm kind of stuck because I gotta come up here. So you do have to push down the blue levers to unlock it, to get it to close, and then once you close it up, it's gonna come all the way back and you're gonna hear it click and lock in place. (tray clicking) So now it's locked in place.
It's not going nowhere. Coming around here, you do have hardware. This hardware is all you need to install this, folks. So literally, there's no drilling into your cargo area. You're using pre-existing mounting locations that are built inside the cargo area floor already, and this supports up to 250 pounds of gear.
So again, whether it's toolboxes, pool coolers, gear, mountain climbing stuff, who knows what, maybe you're going out to the range. Do some sporting clays, hunting, construction sites, this can handle it all. So again, 250 pounds of weight capacity. That's what it's built for. Right now, I have the two side brackets that come with it that are accustomed to your Jeep, just kind of loosely fit it on the table.
And then you're gonna get the main slide out tray in its own box as well. So not much assembly required at all. You have some holes built into it and some slots we're tying down. So if you wanna put a strap up and over some coolers, maybe you have that option. I got 29-1/8-inches wide, about 24-3/4-inches deep. That's the usable space that we're looking at. Folks, that's gonna wrap up by our quick look together at this MORryde cargo area sliding tray for Jeep Wranglers. I'm Steven, thanks for watching.
Ratings & Reviews
Fixs perfectly in the 4xE with SubWoofer. I made a custom 3/4" plywood automotive carpet panel to replace OEM panel, such that it lays flat. Our 43Qt Setpower cooler fits as shown or rotated 90 degrees ; however, the lid clears the metal shelf as shown. Great for camping , trails, or grocery trips.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Nick S.
1/5/2026
That is a pretty sweet setup you have there! I am glad it is working well for you.