7-Way Trailer Wiring Recommendation for 2002 Jeep Wrangler

Updated 05/04/2017 | Published 05/03/2017

Products Featured in This Question

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(383)

$37.01

Adapter 4-Pole to 7-Pole and 4-Pole

(659)

$61.55

Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional

(2763)

$151.23

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3397)

$121.27

Question:

HI Guys i have a 2002 tj wrangler and i would like to connect it to my existing stock wiring, and have it have a 7 pin connector on the end can you please advise on the best solution?

asked by: Chris

Expert Reply:

You will need to start with a 4-way (if you do not have one). For that you would want the # 118409.

Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way.

If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way and install a brake controller.

For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup.