To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Upgrade your Ford F-250 Super Duty's suspension with these maintenance-free contact pads. Sturdy polyurethane contact pads reduce sway and noise for a smoother ride. Optional spacer increases preload. Includes 4 pads.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're gonna be taking a look at the Supersprings Supersway Stops. All you have to do is put your vehicles information in our fit guide on our website and that's gonna get you partnered up with the right kit for your specific vehicle. What the Supersway Stops does is it lowers this little point to where we're gonna activate our overload springs a lot sooner. As you can see, it's definitely a lot bigger than the one that came on here from the factory. So this is just an easy way just to kind of, keep your suspension all working together. Because before I didn't really have a whole lot of weight on here and my overload springs weren't getting activated.
Like I literally wasn't. So this is just going to do a lot of different things for your ride quality. One, it's gonna help prevent porpoising which what that is, whenever you're going down the road and you hit like a speed bump or something, it feels like you're in the back of a bus or you're kind of just sitting there like this and your truck takes a little bit of time to kind of correct. Also with body roll. When we have an extra leaf spring that's doing a little bit more work sooner.
It's gonna kind of feel a little bit more stable whenever you're hauling heavier loads and turning around. And it's also just going to keep some of those uneven terrains, whenever you're hitting potholes and stuff, it's gonna kind of correct and keep your trailer in line with you. So it's gonna give you a little bit more peace of mind whenever you're traveling down the road with a heavy load or something behind your truck. Even without a load on here, we still have the overload springs already hitting our extra little bumpers here. And this is gonna be really, really nice just because having that already there, our back suspension's going to react a little bit quicker.
So if you are hauling a trailer and sometimes it gets a little bit off center, your suspension's gonna kind of correct that. And since we have it activating the overload spring a little bit sooner, it's gonna keep that trailer a little bit closer and centered behind your truck, which is gonna be a lot smoother and a lot less stressful whenever you're driving. These are also gonna be necessary if you do install airbags on your pickup. Why Well, when you install airbags, we're gonna increase the distance between these factory mounts and our overload spring. So when we increase the distance this isn't really gonna make contact at all.
So your bottom three leaf springs are gonna do, be doing all the work. So I would highly recommend grabbing these if you have airbags on your truck already, or if you plan on getting them, it's really something you need. Notice how we have different sections here. So comparing these to the torque lift options we have on our website. The torque lift's only gonna have one solid piece. If we don't really think we're gonna need all of the sections here, we can take out the middle section to bring it up a little bit closer. So I would definitely say this would be an upgrade to the torque lift, just because we do have that adjustment here and it is made of a high impact polypropylene material. So it's gonna be extra strong. It's not gonna crack or break over time. Comes with all the hardware that you need. All you really have is just the actual piece itself. And then some, a washer and a nut. You just need a wrench to tighten it down. Did not take me a whole lot of time at all. There's one on the back right here and then one on the front and there's gonna be two on the other side as well. So it's really, really simple, really easy. And I think it's just a very quick and simple way just to improve your ride quality. So even as he starts to just lower this down, you realize how much the suspension is sagging. It's definitely a lot but activating those overload springs sooner is really gonna make the world of difference. Oh wow. Even on that first bump, I can 100% tell the suspension just seems stiffer, more responsive. It's bouncing around a lot less. Definitely an improvement. And that'll do it for a look at the Supersprings Supersway Stops..
Average Customer Rating: 4.5 out of 5 stars (77 Customer Reviews)
Upgrade your vehicle's suspension with these maintenance-free contact pads. Sturdy polyurethane contact pads reduce sway and noise for a smoother ride. Optional spacer increases preload. Includes 4 pads.
They came when they said they would. Looks easy to install
I replaced a home brew set up with these after noticing one was no longer with the truck. Super easy install and provide a quieter and softer ride than lower the stock mounts.
Very easy to install. Works as they should. I use these along with airbags to manage the weight of a truck camper. My only beef with this product would be the price, very high for what they are. I'm extremely happy with e-trailer, must be delivery and seem to carry good products
Easy installation, great way to get load on the overloads after installing larger tires.
Fit my 2019 RAM 3500 perfect. I bought these to help with hauling my Lance 1172 camper that weighs 5,200 pounds. Wish I would have bought these sooner. Very happy. You can see in the attached photo the new spacers are much thicker and do there job well.
they work great! i would recommend these to anyone wanting to upgrade there bump stops.
I put these on my 2006 Dodge 3500 Dually. I have a Lance Camper that weighs 3300 pounds dry. I had a lot of rocking when I would take a corner and there’s a drain in the road. Now it’s been reduced to where almost all the rocking is gone. I’m extremely pleased with these. There are a lot cheaper than the Torque lifts and there are really really good quality from what I can tell. The installation went smoothly.
E-Trailer did it again with quality and cost that is unmatched.
Thank you again E-trailer.
Install is super easy and quick. Took about 30 min total for install. I can tell some thought went into this products design by the way the SuperSway Stops fit the factory bump stop perch cradle and how they contact the springs, unlike the competitors overpriced option.
I’m hauling a 3300 pound (dry) camper in a 2022 F350 CCLB DRW with camper package. Factory upper overload bump stops weren’t engaging soon enough causing some sway and sagging about an inch over the rear tires. After installing the SuperSway Stops the bump stops now engage taking most of away and rocking out. I also gained 1.5 inch in height over rear tires so truck now sits higher in back. These are the only suspension upgrades I’ve done. I would highly recommend.
Easy to install. I think they are better than the OEM originals. No jacking required for my rig. Took about an hour to install. Fit my Ford F-350 Super Duty
Walt J.
6/17/2024
I have a Ford 350 with a Northern Lite 10-2 on it. I think the kit is performing well. I have stability and zero squat
Worked great!!! but will squeak if you don't put a little silicone grease where it hits the leaf spring. Best improvement for my cabover camper. Can use with air bags and heavy duty sway bar. Highly recommend all 3 for big campers.
Installed these in preparation for switching from a bumper pull to a fiver.
Hardest part of installation was removing stock parts. I installed them without the provided one inch spacers.
Felt a huge difference towing the bumper pull to the dealer to pick up the fiver.
Almost perfect. There is no way to locate the pad from front to back to keep it even as you tighten them. OE pads had wrap around ears to keep them in place. First time I tightened them, they all moved a little either front or back. I jacked each side back up and re located them even, and probably over tightened them to deform them to stay in place. Have no moved since. Also, the washers you supplied were not large enough in diameter and not thick enough. They deformed and pulled through bolt hole, making them move. I went to Lowe’s and got bigger and thicker washers for second tightening and they worked fine.
Over all the installation was straight forward the videos have been a help in all of the products from etrailer.
They do raise the truck enough with a camper to not be concerned low with beam head lights offending oncoming traffic. Fairly easy to install. But they do make a friction noise as they slide on the leaf springs while driving. This really bugged me at first but I'm getting used to it.
Fast response good phone service. Thanks
Terry T.
8/11/2024
Working well
They do the job of preloading the overload springs but are very noisy the material they are made from is extremely hard and you get a loud bumping noise at every hole you hit, and your ride is comprised which is to be expected, I have had them on a few days and I’m not sure I will keep them on for long term
They did not fit my 2006 Ford F250 XLT long bed 6.0 diesel. I’m really upset, as my rear suspension has no room for them between the leaf springs and frame in the rear. I had waited a couple months to put them in so I didn’t try to return them. Still, $[XX] for something that doesn’t work, as opposed to what the item listing described. Very not happy with etrailer now. The front ones went on, but one side is offset to the suspension member, and just yesterday on a big bump it slipped off the member. They don’t fit properly, front or rear, and between the two it was over $[XX] with shipping. What a ripoff. And, the photos won’t upload! Well except for the ones that don’t show the problems. Must be a very clever bit of software that recognizes photos that show the defective product and won’t accept them.
Brooke M.
5/19/2023
Hmm, these are confirmed to fit your vehicle so I am very surprised to hear they fell of just from hitting a bump on the road! I reached out to the manufacturer and they were asking if you could send photos of where everything is installed and how things are situated.
Do you have a question about this Vehicle Suspension?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ron T.
10/12/2024
Super sway stops are still holding up after a years very well. I’ve modded them by cutting a slot in the spacer to be able to take spacer outor install by just loosening the nut on cradle.