Will SuperSprings SuperSway Stops Cause Premature Wearing of Spring

Question

Question:

Slide in camper 4500 lb will constantly engaging SuperSprings SuperSway Stops.cancauses premature wearing upper over load spring ?

asked by: Abraham

0

Expert Reply:

Nope, there will not be premature wearing of your upper overload spring when using the SuperSprings SuperSway Stops # SS65GR.

In fact, these are going to be exactly what you need to help your truck maintain stability and reduce sway with your slide-in camper so they are the perfect option.

expert reply by: Kyle S

0

Answer 1

Hi Charlie, There are a few options for TorkLift tie downs for your 2022 Ford F350 with a 6' 3/4" bed, that can work for you depending on what brand of trailer hitch receiver you're using. If you're planning on using your factory OEM…

view full answer...

Answer 2

Due to the design of the RoadActive Suspension #RAS3611-SLHD you would have to remove the upper overload spring on your 2019 Ford F-350 to use their system. As an alternative if you wish to keep the top overload spring this will depend on if you have…

view full answer...

Answer 3

First, thanks for the kind words! And even with the SumoSprings Solo Custom Helper Springs #SSR-114-47 on your 2016 Ford F-250, you can still absolutely use the SuperSway Stops on your truck, with their part number being the following: - SuperSprings…

view full answer...

Answer 4

We do - for your 2023 Ford F-350 you'll want the TorkLift StableLoad Suspension Upgrade w Quick-Disconnect #TL89CR.

view full answer...

Answer 5

Hello Jeff, Sounds like you’ve got a big camper (about 4,000 lbs) on your 2024 F-350 dually, and when it’s loaded, the truck feels bouncy and sways a bit. That’s pretty common with heavy campers, especially if the suspension is still stock.…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Hello Matt, I was seeing some mixed information on this as well, so I reached out directly to my contact at Firestone to confirm. The Firestone Ride-Rite Air Bags w/ Easy Mount Compressor - Wireless Control - Single Path - 5,000 lbs #F44XV will fit…

view full answer...

Will SuperSprings SuperSway Stops Cause Premature Wearing of Spring

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching