You load up for a weekend off the grid, knowing the weight will shift on rough trails. Instead of bracing for every dip, you drive with steady control and a smoother feel that lets you focus on the road ahead.
When you load up gear for a trip or haul tools for the job, the rear end can start to squat and throw off your handling. These springs compress as weight comes on, adding up to 1,500 lbs of support at 50% compression so your truck stays more level and controlled.
Rough trails and uneven pavement can make the back end feel harsh and bouncy. The closed-cell polyurethane design acts like a cushion, soaking up bumps and softening rebounds so the ride feels more settled instead of choppy.
You know that uneasy feeling when the rear starts to lean in a turn or shift in the wind. These springs firm up as they compress, helping reduce sway and body roll so the truck feels more planted when things get unpredictable.
Air systems can be a hassle with lines, leaks, and pressure checks. This setup is a one-piece solution with no maintenance needed. Once it is in, you can just drive and not think about it again.
Instead of stacking add-ons, this replaces your factory bump stops directly. It is a clean, straightforward upgrade that works quietly in the background without changing how you use your truck day to day.
Some setups only help when fully loaded, but these stay engaged lightly even when you are not hauling. That means less rear-end bounce on daily drives and more control whether the bed is empty or packed.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Ratings & Reviews
Put them on this morning and took about 45-60 minutes. Driving without a trailer has little difference in stiffness so I’m happy about that. Then hooked up my two horse living quarters trailer and hauled about 30 miles to the roping. Roundabouts are so much better and the truck no longer feels tippy. Truck doesn’t squat near as bad. It rides great. Loaded is a little more stiffness as expected but not bone shattering. This was a great purchase!
Installation was very simple. Sumo Springs significantly limit the amount of spring sag when towing my 9000 lb 5th wheel.
Bumpy ride with no load, I have a 22 4runner and I thought these were not supposed to contact my axle unless I had a load on my hitch, towing was great, but with them installed you feel every bump when nothing is in tow. Not a great solution.
Very easy installation. The improvement in handling is phenomenal.
Here’s my true thoughts of the blue sumo spring. Here’s the pro’s for me! Shipped and received the very next day, I got rid of the air bags that never held air. The sumo install was extremely quick. Hooked up to my food trailer and truck only went down about an inch and a quarter, much better than before! Sits about 1” off the axle so I still get a good ride, and loaded with a trailer… it still actually rode good. I’m tickled with them. Now.. the con and only con… I personally think $[XX] for two pieces of urethane and four brackets and two bolts is a horrible rip off!!! But…. LOL.. I’d buy them again!
The Sumo helper springs were not difficult to install (had to jack up the rear a few inches) & I really do think they have helped with steadiness in towing our camper.
Would recommend.
2024 Z71 Silverado towing a travel trailer. Prior to these springs, the truck would bounce and sag. With the SumoSprings, truck is stable and sags less. Unloaded truck drives like factory. Easy install on my own.
I have had these on my 2006 Colorado for a year, great product easy install I haul a compact tractor with bucket and tiller on a single axle trailer and the truck doesn't sag. No adverse ride quality when carrying no load definitely better than installing air shocks. Highly recommend to anyone having issues with vehicle sagging when loaded.
If you want an affordable, indestructible suspension upgrade to eliminate rear sag and towing harshness—without the maintenance head-aches of air systems—the SumoSprings Solo sourced through etrailer.com is one of the smartest weekend upgrades you can make. The installation was easy and the install video they provide on YouTube is priceless.
The Sumo Springs worked great in my 2022 Nissan Frontier and stopped the rear from sagging under trailer load but rode like normal unloaded. Very good product and very easy to install.
Put these on a Jeep Gladiator to haul a motorcycle to Sturgis. Kept everything level, good ride and stability. Highly recommend.
I've never put on a easier product. I put the jack under the trailer hitch mount. Just lifted the body 1-2 inches and used a 12 mm socket . The socket removed the old ones and I hand tightened the new on. Literally took 10 minutes and a beer.
Great product! Bought these for my 2000 7.3 f250. Didn't want something that is constantly active like ras or hellwig since my leaf springs are new and rated for 4k pounds. Installed these in 1 hr super simple only hard part was the factory bump stop on driver side was a pain. Didn't install the puck they give due to height of truck and I knew more or less at what point I wanted them engaging. I haul cattle to shows/ auctions or between pastures with my 24ft big bend and these things actually provided a smoother ride in my truck loaded then unloaded.they do a great job with the added support and are better than an overload spring with handling sway and providing a smooth ride loaded. Just wish I could use the 3k pound rated ones on this truck and my dually but doesn't fit if you have a gooseneck sadly so will probably have to go with timbs on the drw. Over all great product can't speak to longevity but solid for the time being. And customer service with this company is excellent if you have a question or problem they're on top of it...hope they pay them as well as the reputation they're building for them.
I bought and installed the 1000lb Sumo Solo springs to help alleviate rear end squat on my 2024 GMC Canyon Denali when pulling my boat. My boat trailer has a long mono tongue with no weight distribution installed. The boat weighs in at about 5500lbs, the truck fender lip measures 38” high unloaded, once I dropped the hitch down on the ball and the Sumos picked up the load, the fenders measured 36.25” equating to an inch and 3/4 squat. Empty the Sumos have an apx gap of 7/8” above the frame rails. The Sumos were recommended over the Timbrens for my situation of infrequent towing with this truck and to maintain the best ride possible when not towing. So far my ride is virtually unchanged when empty and feels controlled when towing. Installation is straight forward but the instructions could be a little clearer with a diagram showing the intended location of the springs. Luckily an etrailer customer had already done the install and provided some pics so there was no question. I chose to remove the tires to have good access and I’d do it again this way. I supported the truck with a jack stand under the receiver. IMHO the proper method to locate the over frame upper clamp brackets is to push the forward clamp as far forward until it contacts the bed stiffener and you’ll be in the correct location then let all the hardware hang to position itself, tighten as required and enjoy.
Installed these right before a long road trip, and were impressed with how much the ride improved. Opted not to include the spacers, which has worked out fine. While not towing have not noticed any change to the ride, which is good. When towing the steering has a solid grip on the road now (sometimes felt a little loose before installing these) and no more issues with 'porpoising'. We drove across a several mile long bridge in the Bay Area that likely would have been a roller coaster ride previously, and had no issues. Quick and easy to install.
I had the SumoSprings Solo Custom Helper Springs installed on my 2020 Nissan NV2500 camper van (rear axil) about 4 months ago and have been very happy with how they have performed.
Had them installed and hooked up the trailer. Much improved support from sag due to tongue weight. Kept the vehicle very level to within 3/4" higher than front. Perfect rake and comfortable during unloaded or loaded driving. OEM bump stops really didn't do anything in comparison. Shop had to work a bit harder to get OEM stops off but install of these SomoSprinhs was simple. Glad I went this route.
Product is great, exceeded my expectations. Install is simple and straightforward. It’s a night and day difference in both the body roll and the handling small bumps all the way up to off-road conditions.
I had installed this model SumoSpring on my 2019 4Runner and had great results when towing the camper I had at the time. They greatly reduce the bounce when going over dips in the road at highway speeds. Now I have a 2021 Titan and a bigger heavier camper. I expect the same great results on the Titan. Installation was pretty straight forward and took about a half hour. The size difference between the OEM bump stops and the SumoSprings alone should give a better ride when towing my camper.
Love them! The truck barely even squatted, had two dirt bikes, and a generator in the bed as well! It handles the bumps and sway great
Opted for the Blue 1000lb Sumo's w/spacer over the 1500lb Black ones. 1500 Silverado Max Tow & reduces squatting by 2" on a 1000lb+ tongue weight. Ride is still good, but you can feel the Sumo's engage over large dips or bumps which is not an issue for me.
I got the springs installed last week and wanted to have a drive time before I wrote the review.
The height of the springs are perfect for my 2016 Tacoma, They keep the truck stable and nearly eliminate the body roll I had before installing them. I am heading to the mountains in a couple weeks, so I will update the review when I get back. That way I will know for sure the body roll is gone and the truck is stable on the winding mountain roads.
The springs installed in no time at all and since I had the rear end apart, I decided to add the leveling blocks at the same time, to keep the truck from squatting with the gear I haul around with me.
The guys at etrailer are great. And while I did not call them to discuss this item, they have been very helpful in the past with all my questions.
Below are pictures of before, a couple comparisons and after. Sorry if they come out sideways.
These Sumo Springs were a great addition to my Tacoma and well worth the money, IMHO.
2025 Promaster 2500 159” wheelbase. Backed the van on couple 2” X 6 “ easier sliding under. Sprayed PB Blaster on top of bumper spring, using a 16” Channel Lock, easy off with the old. At that time I jacked the rear end to allow clearance. One side at a time. Took longer for set up then the job. I used the long bolt with two spacers. Have not drove yet, though looking for great results.
I put these on a 2013 Jeep JK (not lifted) that tows a 3000 lb trailer in rough terrain; Total game changer.
These replaced the anemic factory stops (which had completely disintegrated) and make it impossible to 'bottom out' on the dips and holes that use to beat up the suspension. I got nearly all of my vertical travel back and the vehicle now sits almost level under high tongue load.
They go on pretty easy. I suggest sliding in one side, and then using a wooden dowel and hammer to pop the other side in the stock receiver cup.
Highly recommended. These are a MUST if you are towing a trailer (with a medium sized SUV) of any significant weight or if you just want to be able to bounce hard without bottoming out your suspension. I am likely going to get the front suspension version now as well.
Wish I knew these existed sooner.
This only pertains to the order, shipping speed, and install as I have not put a heavy load on these sumo Springs yet but I feel like that's a foregone conclusion based off the reviews already. The ordering process, the shipping, and the installation was unbelievably easy. I kept rereading the instructions thinking this can't be right because it was so simple. I looked at the YouTube video and realized it is that simple! So happy with the ordering process, the quality of the initial product I opened, and how simple it was to put on the jeep.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.