bing tracking image
Q & A Icon

Will SuperSprings SuperSway Stops # SS65GR Fit 2026 Ford F-250 and Need Spacer  

Updated 07/22/2026 | Published 07/19/2026

Question:

Can I use these as a standalone product on my 2026 F250 XLT super duty ? I just want to reduce the sag just a little bit and will I need to use the 1inch addition? I currently have an overload spring that never makes contact when I connect my toy hauler.

0

Expert Reply:

Hey Alejandro, yes the SuperSprings SuperSway Stops # SS65GR that you referenced will work on your 2026 Ford F-250 as they are a confirmed fit. It's hard to say if you'll need the spacer as that's more of a personal preference thing but since you want to reduce sag just a little bit I would recommend trying it without the spacer at first and then deciding if you want to add it later or not. What toy hauler do you have?

Or you might mock up the install with and without the spacer and see how much it would engage the overload spring and go from there.

expert reply by:
0
Jameson C
Dakota profile picture

Dakota

7/21/2026

I would get the Timbren SES for sagging

Jameson C. profile picture
Etrailer Expert

Jameson C.

7/21/2026

@Dakota Timbren part # TFR250SDJ is a solid choice that will for sure take out sag but biggest gripe we hear with it is that it is super stiff and can make ride quality rougher.
Stephen profile picture

Stephen

7/21/2026

This is why I bought i have a 2024 tremor and even with my 45ft 5th wheel I never used overloads , with this product with only using 1 spacer I touch the overloads when fully loaded which helps sway alot , with 2 spacers it touches overloads all the time when unloaded and gets a little rough ride , so play with spacers, and you should get what your looking for

Jameson C. profile picture
Etrailer Expert

Jameson C.

7/21/2026

@Stephen that's awesome feedback! I think one spacer is probably the sweet spot for most people.
Dakota profile picture

Dakota

7/21/2026

@Stephen whenever the vehicle is unloaded the timberline SES system does not make contact with with the leaf spring bracket so the ride is stock and when you have a load on, the rubber makes contact with the leaf spring bracket acting as a cushion because it’s rubber and it gives and it’s not a bad ride coming from my experience with my F250 Tremor 2022 I have 4000 pound bed camper in my bed to give you some idea of the weight it handles
Ed profile picture

Ed

7/22/2026

We use the sway stops on all our super duties, since 2008, engages the overload springs when we have the 5300lb artic fox 990 truck camper in the bed or the 14k toy hauler bumper pull, we have the camper package on all our trucks, 250's & dually 350's. Stops the sway on rough roads or when turning. Easy install. Costly for what you get. I have them set so they are about 1/2' from touching the leaf springs. Works great.

Carlos profile picture

Carlos

7/22/2026

I bought the SuperSprings SuperSways for my chevy 3500 dually. We have a dual slide camper and helpers on the lower overload springs. With the addition of the SuperSprings I dont even feel like we need airbags. It actually improved the handling when were up in the mountains. I'd get them again if we get another truck. I did have the rubber slip on one of them. Super spring replaced it no problem.

Jameson C. profile picture
Etrailer Expert

Jameson C.

7/22/2026

@Carlos That's awesome to hear!

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>