Get a focused and controlled beam with no glare from with these PSX24W LED fog light bulbs. Concept series features built-in LED drivers with advanced temperature regulation. Plug-and-play installation.
Features:
Specs:
Lumens are used to measure the amount of usable light that is put out by a light source. Raw lumens represent the number of lumens that the manufacturer claims the LEDs are capable of producing. It does not include the light's drive method or the amount of light lost from the lens or reflector. Effective lumens take these factors into account and represent the number of lumens that are actually produced by the complete light assembly, not just the amount of light that the diodes are capable of producing. Stable lumens builds off the idea of effective lumens by measuring the amount of light produced after 30 minutes of usage, or once the diodes have reached their average operating temperature. These bulbs have a 3,000 raw lumen capacity per bulb and produce 1,995 effective lumens per bulb. The stable lumen capacity per bulb is 1,550 lumens.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Ellen: Hey everyone. I'm Ellen here at etrailer.com, and we're going to be taking a look at the replacement LED bulbs for your fog lights. This also comes with the anti-flicker harness for those vehicles that are equipped with CAN bus or PWM. These are going to be a replacement for that fog light to give us a really nice bright light for our vehicle. The nice thing about this is that there's no cutting or splicing. It's going to be that direct connection, so it's just a plug and play application.
It should be pretty easy to get installed. Let's take a closer look at what comes in the kit and some of the features of the bulbs. We'll get two bulbs, one for either side, and then also our two harnesses as well. There's going to be a couple of pieces of double-sided foam tape to help us mount the harnesses in place, and then also a couple of small zip ties as well.You get instructions and a sticker with the bulbs. As far as the features of the light, they are optically precise, or they have a precise design to help throw the light further than your typical lights.
That's going to give you better visibility. It also is going to have a nice, cool white color to it, so it's going to help to promote visibility in that sense as well. I'm going to hook this up to power and ground so you can see how bright these lights are. Now, as I mentioned, this is just going to be a plug and play application for you, but since I don't have a vehicle for this to hook up to in my studio, I'm using my little alligator clamps. You can see really nice, bright light.
Turn off the studio lights, and just with this little guy all on its own, it's going to provide us that really nice, bright light. You can see it's a nice, cool white color, so it helps to make it easier to see things as we're out on the road.That light spectrum is usually a better one for our eyes to detect things even in lower light. It should be a great upgrade from what you have in your vehicle normally. You can take a look at some of the specs here. I'm going to turn my lights back on.
Turn these guys off. They are IP67 rated, which means that they are impervious to dust and also should be completely weatherproof so no worries about any water getting in there and causing any issues. The light output per bulb is going to be 3000 lumens. That's going to be for the raw output. The effective lumen output is 1,995, which is just under 2000 lumens. That's really the number to pay more attention to. That's more the real world application of what to expect from the light. After about 30 minutes, that does drop down to the stable lumen output of 1,550 lumens.Color temperature, again, is 6,500 Kelvins. That's that nice, cool white color. The wattage per bulb is 16.5 watts. Power draw at 13 volts is 1.3 amps per bulb. Our operating voltage is 7.5 volts up to 16 volts DC, and it does have a two-year limited warranty. That's about all there is to it for our look at the lights that are the replacement bulbs plus harness. I hope this video has been helpful. Again, I'm Ellen here at etrailer.com. Thanks for watching..
Average Customer Rating: 4.8 out of 5 stars (12 Customer Reviews)
Get a focused and controlled beam with no glare from with these PSX24W LED fog light bulbs. Concept series features built-in LED drivers with advanced temperature regulation. Plug-and-play installation.These worked fine in my 2022 Colorado. No brighter than the factory lights but the "right" color. Didn't need the anti-flicker harness though.
I've had the opportunity to use these LED's for about a month now and I can say they have worked great. They are exceptionally brighter than the OEM halogen bulbs with a slight blueish tint. I have tried other cheap LED's that flickered or pulsed and threw the light out everywhere, blinding oncoming traffic. These LED's have a very define cut-off line and concentrate the light appropriately. These are plug-and-play so it easy to install these in my quad headlights. I have a stock height truck so I didn't need to re-aim my headlights once I was done. I would suggest these as an upgrade from stock lights. Thanks etrailer!
They are great. Anything better than stock lights. All the lights on my truck are LEDs now.
They worked well, as anticipated and hoped for.
all good
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.