Is it Okay to Use Stripped Out Wet Bolt for Trailer Suspension

Updated 11/29/2021 | Published 11/27/2021

Products Featured in This Question

Replacement 7/16"-20 Flange Nut - Qty 1

(57)

$2.56

Replacement Wet Shoulder Bolt - Equa-Flex Tandem Axle Suspension - 9/16" x 3-3/8" - Qty 1

(109)

$17.84

Question:

Question. I installed the Road Armor Suspension upgrade today and two of the wet bolts spin when tighting. Question will this be a future issue. It appears they stripped out after seating them. Let me know if this will be an issue. Thanks.

asked by: Rick M

Expert Reply:

The instructions for the Road Armor Shock Absorbing Equalizer Kit like part # LC696740 calls for a specific torque rating when installing the wet bolts and nuts (see linked instructions for specifics). If you aren't able to torque the nuts and bolts appropriately then that can be pretty dangerous once you get heading down the road.

If you suspect the hardware is stripped out then I definitely recommend replacing it. Stripped out hardware has never done anyone any good and it's always better to be safe than sorry. You wouldn't want the suspension of your trailer to give out, especially if you're heading down the highway.

For a direct replacement wet bolt you need part # LC126197 and then for the nut you need part # LC122103.

expert reply by: Jon G