Recommended Replacement Wet Bolts For 5th Wheel Suspension System
Published 11/29/2021
Products Featured in This Question
Question:
I have a grand design 5 th wheel with 18 month old factory installed SRE 3000 Suspension and three of the bolts have frozen grease zeros. Do you sell the individual bolts? One is the pivot bolt and the other two are the end bolts in the springs.
asked by: Mike A
Expert Reply:
I do have wet bolts that will match the ones needed for your MORryde SRE 3000 suspension system, but they technically will not be MORryde brand. If this is not an issue, you will need the Replacement Wet Shoulder Bolt # LC126238 and # LC126197. The # LC126238 will measure 2-5/16" long and will be the pivot bolts, and the # LC126197 will measure 3-3/8" long and is designed for the extra spacing with the heavier duty shackles on the springs. This will get you all squared away.
Product Page this Question was Asked From
MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 6-1/2 Inch Long
- Tandem Axle
- MORryde
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Tandem 7K Trailer Axles
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Shop: Replacement Wet Shoulder Bolt - MORryde Suspension Upgrade Kits - 9/16" x 2-15/16" - Qty 1
- Shop: Replacement Wet Shoulder Bolt - Equa-Flex Tandem Axle Suspension - 9/16" x 3-3/8" - Qty 1
- Shop: Step Wet Bolt for 1-3/4" Double Eye Springs
- Shop: Replacement Wet Shoulder Bolt - MORryde Suspension Upgrade Kits - 9/16" x 3-3/8" - Qty 1
- Shop: MORryde U-Bolts for 5,200-lb to 7,000-lb Round Trailer Axles - Qty 4
- Search Results: steel tow shackles
- Search Results: front axle suspension enhancement vehicle suspension
- Search Results: trailer suspension parts
- Search Results: morryde cross brace
- Video: Setting Up Your MORryde Standard Frame Hanger X-Factor Crossmember - 2018 Grand Design Reflection Fi
- Video: Review of RV Ride Control Trailer Suspension Parts - Alignment and Lift Kits - RR23QX
- Search Results: lug nuts
- Search Results: lippert correct track
- Video: Review of CE Smith Trailer Suspension Parts - Shackle Bolts - CES25QR
- Q&A: Replacement Wet Bolts and Bushings for Equa-Flex Trailer Suspension
- Q&A: Wet Bolt Kit for Use with MORryde CRE3000 Kit
- Video: DIY Install: Step Bolt For Double Eye Springs on your 2020 Grand Design Momentum 5W Toy Hauler
- Video: Feature Breakdown: Replacement Wet Shoulder Bolt
- Q&A: Wet Bolt that is Long Enough to be used with Correct Track Lift Kit
- Q&A: Recommended Equalizer and Wet Bolt with Bushings for 7,000 lb Axle with Correct Track
- Q&A: Replacement Wet Bolt and Bronze Bushing For a 2022 Grand Design Imagine 2800BH With MORryde CRE 3000
- Q&A: Replacement Wet Suspension Bolt Recommendation for Montana Trailer with Lippert Correct Track
- Q&A: Okay to Use Wet Bolts For Lippert Correct Track Suspension System
- Video: Feature Breakdown: MORryde U-Bolts for 5,200-lb to 7,000-lb Round Trailer Axles
- Shop: Trailer Hitch
- Search Results: trailer tires and wheels
- Article: Trailer Wiring Diagrams
- Video: An In-Depth Look at the MORryde X-Factor Crossmember for Standard Frame Hangers
on Trailer Suspension Parts
