Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This compact 2-5/8" x 1-1/4" Dragon’s Eye LED light shines bright without pulling much power. With two efficient diodes behind a red lens, it gives off a clear, even glow while using far less energy than incandescent bulbs. There are no filaments to break and no bulbs to replace, so it just keeps working trip after trip. The LEDs are built to last up to 50 times longer than traditional lights, cutting down on maintenance and worry.
Road grime and moisture can ruin trailer lights fast, but this one is built for it. The housing and lens are weatherproof to keep water out and protect the LEDs from corrosion or shorting. Whether it’s rain, spray, or dirty roads, the sealed design holds up so you can count on reliable light in all conditions.
Installation doesn’t get much easier. The light mounts directly to the surface using the existing hardware pattern—no drilling new holes if you’re replacing a similar unit. It’s a 1-wire design that grounds through the mounting hardware, so wiring is straightforward with minimal connections to make. The mounting holes are spaced at 1-15/16" center to center for a secure fit.
At just 3/4" deep, this small oval fits tight spaces without sticking out. Its unique Dragon’s Eye shape adds a clean look while staying functional as both a clearance light and side marker when mounted properly. The red lens over white LEDs gives it a crisp, modern appearance that stands out day or night.
You can trust that this light meets safety regulations wherever you travel. It’s fully SAE and DOT compliant, so it provides the visibility you need while staying within lighting requirements. Durable polycarbonate construction rounds out the package for a dependable light you can install once and forget about.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're gonna be taking a look at and showing you how to install the Dragon's Eye LED Clearance or Side Market Light. Here's what the light looks like while it's on. As you can see, it's nice and bright, and it's that way because it's an LED. That's one of the nice things about it. With an LED, you don't have to worry about brittle filaments like your traditional incandescent bulbs. It's also gonna use less power to run.
This light's gonna be DOT compliant, and another thing I really like about it is how compact it is. It's gonna provide that nice clean look.Our light measures 2 5/8 of an inch long, an inch and a quarter high, from bolt hole to bolt hole. That'll be an inch and 15/16ths. And the thickness of the light, or the depth, is 3/4s of an inch. This light does have two diodes, which will put off plenty enough light.
It also has this red lens, which in my opinion looks good on this trailer.All right, here on the back of the light, we have our power wire that's coming out of the back of it. And also, the ground strap is incorporated into one of the mounting locations. The reason that ground strap is a really cool feature, is because it eliminates the need for another wire, coming out of the back of the light. Now, there are clear lenses available if that's more your style.Now, I'll show you how easy it is to get the light installed. Now, depending on your application, you may have to drill a few holes.
That way we can run our wire through the frame of the trailer, and also our mounting hardware into the frame. Now, since this portion where the wire comes out sits at the same height as the outer part of the light, it's a good idea to make your hole just a little bit larger. That way, if your center hole happened to be off center and we ran our wire through, it wouldn't smash the wire. So, a little bit larger of a hole gives us plenty of wiggle room. So once we have that done, we simply run our wire through and push it up against the frame of the trailer.And now we're gonna go ahead and attach our light to the frame of the trailer.
Now, we're going to use number eight size self-tapping tech screws. If you need some of these, you can pick some up at etrailer.com. So go ahead and feed it through the hole in the light. Get the other one going. And you just need to get it snug. You don't need to crank it down super tight.There, now we can connect our power wires. So we'll take our trailer power wire and our light power wire and connect the two together. Now we're gonna do that using a heat shrink butt connector that you can find on etrailer.com. Slide it over the wire, crimp it down, and do the same thing for the wire coming out of our light. Once we have them crimped, we can use a heat source to shrink the heat clamp. Now we can put some power to the light, make sure it works.Next thing you would wanna do is use some zip ties and secure your wire up out of the way to help keep it protected. Now, if you bought more than one of these lights and need to get the others installed, you just repeat that same process.And that'll do it for our look at and installation of the Dragon's Eye LED Clearance or Side Market Light.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
Bought these for replacement leds on my 2024 cargo trailer and these are brighter than oem ones. Definitely will buy again!
The customer service from etrailer is extraordinary. I got the wrong type of light (my error) and etrailer fixed me up in a jiffy. Parts are top quality and nothing beats the attention and quick assist I got to help me out of my dilemma. I will keep etrailer on my "A-List"!
I ordered this running light based off the pictures that had yellow and white wires. I received the newer version that has black and white wires and the black base is a little taller than the one in the picture and on my trailer. I figured that would happen and ordered two even though I only needed one. Please update your pictures to match what you are sending. Thanks
This was our first time ordering from etrailer. Seamless transaction, great communication, parts arrived earlier than expected, and staff followed up to make sure we were happy. Great resource to keep our race rigs ready to go!
Extremely quick delivery
Very happy
Excellent quality and easy to install
Easy to order - Delivered ahead of schedule- product arrived damage free- will use this supplier again for all of our trailer parts and accessories!!
Fits just like the original installed on the Kona kart.
Got them haven’t put them on yet.
I called and ordered , I like talking to a person , but I’m sure you can order by website , received my order in a timely manor
The Dragon Eye marker lights were exactly what I was looking for. I ordered them online and the website was easy to navigate and the parts arrived faster than expected. Great job.
Works as it should. Bigger than the one I replaced, but that’s ok. Better than being smaller!
Nice and bright! Easy to install.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Philip
7/17/2023
Good