Class V Hitch That Fits 2001 Dodge Ram With 6-1/2 Foot Bed

Question

Question:

Will this fit on a 6.5 bed

asked by: Shawn

0

Expert Reply:

There is an option for a Class V trailer hitch receiver for your 2001 Dodge Ram with a 6-1/2 foot bed, though the Curt Trailer Hitch Receiver # C15319 is only a fit for 8 foot beds. Instead, for your 6-1/2 foot bed '01 Ram, the correct fit is the following:

- Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" # C15300

I verified this fit with the manufacturer for you.

expert reply by: Kyle S

0

Answer 1

The Curt Class V part #C15319 and the #C15318 both do fit your 1997 Dodge Ram 3500 single cab but the difference is the bed length that either hitch is designed to fit. The part #C15319 is for the long bed trucks and the #C15318 is for the short bed…

view full answer...

Answer 2

The only way to install a trailer hitch with a 2-1/2" receiver on your 2001 Dodge Ram 2500 is to go with a universal-type hitch like this one from Curt: - Curt Class 5 Universal Weld-on Hitch w/ Brackets #C37CR All of the custom fit options for…

view full answer...

Answer 3

The Curt Trailer Hitch Receiver - Multi Fit - Class III - 2" #C13902 is compatible with most full-size pickup trucks and Dodge/Ram is included among them. From what I could find out, there should be little to no drilling to get this installed on…

view full answer...

Answer 4

We offer three Class V Curt hitches for your 1995 Dodge Ram 3500 4WD Dually Diesel that can be seen on the linked page. All share the same 2400-lb tongue weight (TW) and 16K maximum trailer weight ratings, and all increase to 17K GTW if used with a…

view full answer...

Answer 5

The Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class V - 2" #41923 for your 2002 Dodge Ram is made in Mexico. It is made to US standards and Draw-Tite is an American company. If you are wanting a USA manufactured trailer hitch,…

view full answer...

Answer 6

I spoke with my contact at Curt and he put together a chart that has all of the dimensions of the hitches you referenced.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Class V Hitch That Fits 2001 Dodge Ram With 6-1/2 Foot Bed

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching