bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class III
  4. 2 Inch Hitch
  5. 4000 lbs GTW
  6. Concealed Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
CURT

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Part Number: C13363
In Stock
$216.94
Retail:$360.95
You Save: $144.01
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number C13363 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (132)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C13363

Highlights

  • Concealed Cross Tube Design: Offers a clean look and improves ground clearance.
  • Strong Class III Rating: Supports up to 600 lbs tongue weight, 4,000 lbs trailer weight.
  • Precision Welding: Robotic welds enhance strength and ensure a perfect fit.
  • Corrosion-Resistant Finish: Gloss black powder coat over protective base coat resists rust.
  • Made in the USA: Sturdy, square-tube design, assembled with imported hardware.
  • Bolt-On Installation: No welding required, ensuring easy DIY mounting.

Features to know about

Sleek Look and Enhanced Clearance: Concealed Cross Tube Design

Say goodbye to unsightly hitches with the Curt Trailer Hitch Receiver! Its concealed cross tube design provides a clean, streamlined look that seamlessly integrates into your vehicle's frame. This feature enhances ground clearance, ensuring your adventures remain worry-free when driving over rough terrains.

Bolt-On Installation Made Simple: No Welding Required

No welding? No problem! The Curt Trailer Hitch Receiver offers a straightforward bolt-on installation, eliminating the need for any welding. Whether you're a DIY enthusiast or new to installing hitches, you’ll appreciate the simplicity and ease that this feature brings to the setup process.

Robust Performance in Every Drive: Class III Rating with Impressive Weight Capacities

Equip your vehicle with enduring strength with the Curt’s Class III rating. With a mighty 4,000 lbs gross trailer weight and a 600 lbs tongue weight capacity, this hitch is built to handle robust towing tasks. Whether it's for a weekend getaway or a cross-country road trip, you're sorted with a setup you can trust.

Sturdy Build for the Long Haul: Powder Coated Steel

An enthusiast's favorite, the Curt Trailer Hitch Receiver is crafted from sturdy, powder-coated steel that stands up to corrosion and rust. This durable feature ensures that your hitch not only performs well but also maintains its sleek appearance year after year. It's a perfect match for those who love lasting quality!

Adaptable Wiring Solutions: Easy-to-Use T-Connector Wiring Harness

Need trailer lights? No sweat! The Curt T-Connector Vehicle Wiring Harness adapts effortlessly, plugging straight into your existing vehicle wiring. It ensures your trailer’s turn signals, brake lights, and tail lights are in sync without the mess of splicing, making it a breeze to prepare for your towing adventures.

High-Quality American Craftsmanship: Assembled in the USA

Proudly assembled in the USA, the Curt Trailer Hitch Receiver stands as a testament to top-tier quality and workmanship. This feature promises an American-made product that lives up to high standards while supporting local craftsmanship. You get reliable performance that makes towing tasks straightforward and efficient.

Specs

Receiver

  • Receiver opening: 2" x 2"

Rating

  • Class: III
  • Maximum gross trailer weight: 4,000 lbs
  • Maximum tongue weight: 600 lbs
  • Not rated for use with weight distribution systems

Warranty

  • Limited lifetime warranty

13363 Curt Class 3 Trailer Hitch Receiver

Installation Details C13363 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:

Ratings & Reviews

4.8

206 reviews
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:


25
206
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Why Are There Two Curt Trailer Hitches Made for a 2017 Jeep Compass
    There were two generations of the Jeep Compass in 2017. An older body style and a newer one. The part # C13363 is for the newer style and the part # C13081 is for the older style. Old Body Style models will have the letter D as the 11th character in the VIN. New Body Style models will have the letter T as the 11th character in the VIN.
    view full answer...
  • Recommended Hitch for a 2023 Jeep Compass
    Yes, there is a hitch available for your 2023 Jeep Compass. I recommend the etrailer Hitch item # e48AR. This hitch is custom fit and bolts to your Jeep with included hardware. I really like this hitch because the crosstube is hidden behind the rear bumper cover. This leaves only the 2" receiver visible which not only looks better it also helps with ground clearance. I have attached a picture below so you can see what this hitch looks like once installed. If you are planning on towing...
    view full answer...
    Image 1 for
  • Does Curt Trailer Hitch Receiver Fit 2018 Jeep Compass Trailhawk
    Super smart to check and wherever you heard was correct because I can verify for you the Curt hitch absolutely fits your 2018 Jeep Compass Trailhawk, and you do have the right part number: - Curt Trailer Hitch Receiver # C13363 In fact, check this out - a super nice customer of ours sent in a photo of the # C13363 on their Jeep Compass Trailhawk which I have shared with you below so you can see the hitch installed. The only other thing I wanted to add is that if you plan on doing some...
    view full answer...
    Image 1 for
  • Comparing Curt and etrailer Hitch for 2024 Jeep Compass
    The Curt # C13363 and etrailer # e48AR are both Class III hitches with a bolt-on installation. They also have the same max gross trailer weight of 4,000 lbs and max tongue weight of 600 lbs. The design for the two hitches is actually identical. The difference is going to be the finish. The Curt has a glossy finish while the etrailer hitch has a matte black finish. I prefer the matte black since it gives the hitch that OEM look. It also does a better job hiding dirt and scratches so that...
    view full answer...
  • Recommended Hitch for a 2022 Jeep Compass
    To add a hitch to your 2022 Jeep Compass, I recommend the etrailer Hitch item # e48AR. This hitch is custom fit and bolts to your Jeep with included hardware. I really like this hitch because the crosstube mounts behind your rear bumper cover leaving only the 2" receiver visible. Since you are planning on towing you will also need a wiring harness item # C66BR and a ball mount kit item # C45534. I also recommend using the No-Drill Mount Bracket item # 18136 and the item # C42CR to secure...
    view full answer...
  • Recommended Hitch for a 2023 Jeep Compass
    I would be happy to! To add a hitch to your 2023 Jeep Compass, I recommend the etrailer item # e48AR. This hitch is custom fit and bolts to your Jeep with included hardware. I really like this hitch because the crosstube mounts behind your rear bumper leaving only the 2" receiver exposed. This not only looks better but helps with ground clearance. The etrailer Hitch item # e48AR is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity and a 600 lbs maximum tongue weight....
    view full answer...
  • Recommended Trailer Hitch for a 2018 Jeep Compass Sport
    Yes, I have two options for your 2018 Jeep Compass Sport; the Curt Trailer Hitch Receiver part # C13363 and the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76144. The main difference between them is that the Curt hitch which is what I recommend has a hidden cross tube (see photo) whereas the Draw-Tite hitch has a revealed cross tube (see photo) that does not look as nice. That said, you will need to trim the lower bumper fascia slightly for the Curt hitch and this is not required...
    view full answer...
    Image 1 for
  • Does etrailer Trailer Hitch Receiver Installation Require Cutting or Drilling on 2021 Jeep Compass
    Installation of the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e48AR will not require any drilling on your 2021 Jeep Compass. This features a bolt-on installation and uses existing holes in the frame. However, you will need to trim the bumper cover and heat shield before reinstalling. Although we do not have an installation video for this hitch, the process is identical for the Curt # C13363. I have attached an installation video of the Curt hitch...
    view full answer...
  • Should Exhaust be in Original Position After Installing Curt # C13363 on a 2018 Jeep Compass
    If you can get the exhaust to sit in its original location after installing the Curt Trailer Hitch Receiver # C13363 on your 2018 Jeep Compass then that is what I recommend doing. Sometimes after installing a trailer hitch the exhaust cannot be reinstalled in the same location without touching the trailer hitch. This produces some unwanted noise so if putting the exhaust in the original place makes it touch the trailer hitch then I wouldn't move it. It is perfectly fine right where it...
    view full answer...
    Image 1 for
  • What is the best hitch for the 2022 Jeep Compass?
    The best hitch for the 2022 Jeep Compass is going to be the Curt Trailer Hitch Receiver item # C13363. The Curt Trailer Hitch Receiver item # C12174 you were looking at has a 1-1/4" receiver. You are going to want the 2" receiver as it is a Class III hitch with more capacity and there is a wider selection of accessories available with a 2" over the 1-1/4". The Curt Trailer Hitch Receiver item # C13363 is custom fit and bolts to your Jeep's frame with included hardware. It does not require...
    view full answer...
  • Best Trailer Hitch for Towing with 2020 Jeep Compass
    For your 2020 Jeep Compass I recommend the Curt Trailer Hitch Receiver # C13363. It's rated at 600 lbs of tongue weight, and 4,000 lbs of gross trailer weight. However I looked up the owner's manual for your Compass, and it is rated for a maximum of 2,000 lbs towing, and 200 lbs for tongue weight depending on how it is equipped. It's pretty common for hitches to be rated higher than the vehicle they go on, but you want to use the lowest rating out of all the components used in your towing...
    view full answer...
    Image 1 for
  • Installation of Curt Hitch Receiver on 2019 Jeep Compass Without Predrilled Frame Side Holes
    For your 2019 Jeep Compass, to install the Curt Hitch # C13363 which is a custom fit, you would need to drill those holes and install the hardware. We haven't seen any models that don't have the two holes on each side of the vehicle in those frame rails, so they would need to be added.
    view full answer...
  • Will Installing Curt Trailer Hitch Receiver and Trimming the Heat Shield Void My Factory Warranty
    Installing a trailer hitch like Curt Trailer Hitch Receiver part # C13363 which is a custom fit for the 2018 - 2020 Jeep Compass and 2017 - 2017 Jeep Compass New Body Style will not void the factory warranty. The magnuson-moss warranty act states that manufactures cannot void the warranty because you installed an aftermarket part unless the aftermarket part is what directly caused damage to the vehicle. I recommend to look it up online. I have also attached an installation video for your...
    view full answer...
    Image 1 for
  • Does Curt Trailer Hitch Receiver C13363 Fit A 2021 Jeep Compass Trailhawk?
    The Curt Trailer Hitch Receiver # C13363 is designed to fit all models of the 2021 Jeep Compass so it will fit your 2021 Jeep Compass Trackhawk perfectly. This hitch has a 600lb tongue weight rating and 4000lbs trailer weight rating making it a perfect option for carrying a bike rack or cargo carrier, or for a ball mount to tow a trailer. If you are planning on towing with your Compass you will also need a vehicle wiring harness # C56369, and a ball mount, hitch ball, and hitch pin and...
    view full answer...
    Image 1 for
  • Does Curt Hitch for 2018 Jeep Compass Come with Pull Wires to Install Hardware
    Yes, the Curt Trailer Hitch Receiver # C13363 comes with 6 pull wires to assist with installing this on your 2018 Jeep Compass, just like what you see in the linked video. If you let me know what you plan on using the hitch for I'd be more than happy to make some additional recommendations for you!
    view full answer...
  • Trailer Hitch Recommendation for 2018 Jeep Compass for Towing Trailer
    For a 2 inch hitch that would work great for towing with your 2018 Jeep Compass the hitch I recommend is the Curt trailer hitch part # C13363. What's great about this hitch is that it's made here in the USA, has a 2 inch opening like you wanted with plenty of capacity at 6,000 lb trailer weight and it has a concealed crosstube which makes it less visible than other hitches where you can basically see the whole thing from the rear of the vehicle. See attached picture. For trailer wiring...
    view full answer...
    Image 1 for
  • Best Trailer Hitch For 2021 Jeep Compass Sport
    Hello Melvin, thanks for reaching out. What I recommend for your 2021 Jeep Compass Sport is the etrailer Trailer Hitch Receiver # e48AR. This has a 2" receiver, a 4,000 lb towing capacity and 600 lb tongue weight capacity. The only thing to keep in mind is installing a trailer hitch may interfere with the functionality of your hands free liftgate sensor. If you intend to tow a trailer, you will also need the Curt T-Connector # C56369. The video I linked below will show you an example...
    view full answer...
  • Does Curt Trailer Hitch FIt 2019 Jeep Compass Without Drilling Into Frame
    Hey Jamie, I have good news for you because you do not have to drill any new holes into the frame of your 2019 Jeep Compass to install the Curt Trailer Hitch Receiver # C13363. You made a really nice choice because this hitch as it has a hidden crosstube so only the receiver is going to show, leaving your Compass with a clean aesthetic. The only other thing I wanted to add is that if you are going to be doing some towing and need a 4-way trailer wiring harness, the correct fit for your...
    view full answer...
  • Trailer Hitch Recommendation for 2022 Jeep Compass
    For your 2022 Jeep Compass the best hitch option is the Curt # C13363 which is mostly hidden and has the best towing capacities. For trailer wiring then the Curt kit part # C56369 would be a really great option that's easy to install and comes with the most reliable converter box.
    view full answer...
    Image 1 for
  • Will Install of Curt C12174 Class II Hitch on 2018 Jeep Compass Require Trimming The Bumper
    To install the Curt Class II # C12174 hitch on a 2018 Jeep Compass, you won't need to cut a hole in the bumper itself, but you WILL need to cut a 2-5/8 x 2-1/2 inch notch in the bottom of the bumper cover/fascia as shown in step # 5 of the linked installation instructions. If you don't wish to notch the bumper cover/fascia, you could use the Draw-Tite Class II hitch, part # 36598 which wouldn't require any trimming, however the hitch will be much more visible. I'll link you to an install...
    view full answer...
  • Recommended Trailer Hitch Receiver for 2018 Jeep Compass
    The Curt Trailer Hitch Receiver # C13363 is a custom fit for your 2018 Jeep Compass. It will require trimming the bumper cover trim and the heat shield. I've attached a photo of the instructions where it shows this, but have also linked the entire instruction details for you to view. If you don't wish to do the bumper cover trimming, then I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 76144. This is a confirmed fit as well and still requires minor heat shield trimming,...
    view full answer...
    Image 1 for
  • Will the Curt 12174 Fit a 2020 Jeep Compass Trailhawk
    Yes. The Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12174 is a confirmed fit on all models/trim packages of the 2020 Jeep Compass, including the Trailhawk. This is a 1-1/4" hitch receiver, but if you need a 2" receiver you can use the # C13363, which also a durable Curt hitch. I've linked the available trailer wiring harnesses for your Compass as well, in case you're planning on towing.
    view full answer...
  • Recommended Trailer Hitch Receiver For 2019 Jeep Compass Trailhawk
    I have another option for you, but the Curt Trailer Hitch Receiver # C13900 you were looking at is not confirmed to fit your 2019 Jeep Compass Trailhawk. Instead I recommend the Curt # C13363 as it was made specifically for your vehicle, and is confirmed to fit. This hitch has a 600lb tongue weight rating and 4000lb trailer weight rating so it is a great option for carrying a bike rack, cargo carrier, or even a ball mount for towing a trailer. If you are planning on towing a trailer you...
    view full answer...
    Image 1 for
  • How to Determine if 2017 Jeep Compass is New or Old Body Style for Picking Out Hitch
    I checked your order notes and you ordered the Curt Hitch part # C13081 for your 2017 Jeep Compass which is listed as a confirmed fit if you have the OLD body style. It sounds like you have the NEW body style Compass which requires the part # C13363 instead. New Body Style models will have the letter T as the 11th character in the VIN. I'd check that first and we can go from there but I am fairly certain it's a body style issue. Old body style will have the letter D instead.
    view full answer...


< Previous



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B
Employee Amanda M
Written by:
Amanda M
Employee Jonathan Y
Video by:
Jonathan Y
Employee John S
Video by:
John S
Employee Robert C
Test Fit:
Robert C
Employee Bradley B
Test Fit:
Bradley B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


<