We'll connect you with nearby partnered installers who know this exact setup.

CURT

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Part Number: 13160

64 Reviews | 19 Questions

In Stock

$256.28

Not Confirmed to Fit

2013 Mini Paceman

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" 500 lbs TW 13160

13160 - 6000 lbs WD GTW CURT Trailer Hitch

Show All (6) Product Images

Show Fewer Product Images

In Use/Installed

Trailer Hitch 13160 - 600 lbs WD TW - CURT on 1995 Jeep Cherokee

CURT Trailer Hitch - 13160 on 1995 Jeep Cherokee

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" Class III 13160 on 1995 Jeep Cherokee

13160 - Class III CURT For Towing on 1995 Jeep Cherokee

Trailer Hitch 13160 - 2 Inch Hitch - CURT on 1995 Jeep Cherokee

13160 - 5000 lbs GTW CURT Trailer Hitch on 1995 Jeep Cherokee

Show All (7) In Use/Installed

Show Fewer In Use/Installed

Customer Photos

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" customer photo

Show All (5) Customer Images

Show Fewer Customer Images

Videos

DIY Install: Curt Trailer Hitch Receiver on your 1995 Jeep Cherokee

Beginner’s Guide to Installing the Curt Trailer Hitch Receiver on a 1998 Jeep Cherokee

Mount: Curt Trailer Hitch Receiver on a 2001 Jeep Cherokee

Show All (3) Videos

Show Fewer Videos

We'll connect you with nearby partnered installers who know this exact setup.

SCHEDULE AN INSTALLATION

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 13160 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (64)
Q & A (0)
Related Parts
Photos

CURT Trailer Hitch - 13160

Highlights

Custom Fit for Your Vehicle: Mounts to existing attachment points
Tows up to 5,000 lbs (GTW): Handles small campers, boats, or utility trailers with stability
Holds up to 500 lbs (TW): Supports bike racks, cargo carriers, and Class III towing accessories
Bolt-On Install: Mounts directly to the frame with included hardware—no drilling or welding
Corrosion-Resistant Finish: Gloss black powder coat over base coat protects against rust
Round Tube Design: Keeps the hitch looking clean and less visible under the rear bumper

Features to know about

Haul More Without the Hassle: Class III Strength with 2" Receiver

This Curt Trailer Hitch Receiver gives you a solid 2" x 2" opening that’s ready for towing, cargo carriers, or bike racks. Rated for a maximum gross trailer weight of 5,000 lbs and a maximum tongue weight of 500 lbs, it’s built for everyday jobs like hauling small trailers or gear. When used with weight distribution, those limits climb to 6,000 lbs GTW and 600 lbs TW for added stability. It’s a dependable Class III hitch that offers the right balance of strength and versatility for regular towing and transport use.

Get It Done in the Driveway: Bolt-On, No-Drill Installation

You don’t need a lift or welding setup to get this hitch on your vehicle. The custom-fit, bolt-on design lines up with existing frame holes and installs using common hand tools. Everything needed comes in the complete hardware kit, along with clear instructions so you can handle the install on your own terms. The round-tube construction helps it sit neatly under the bumper while keeping a clean appearance.

Built to Last Through the Long Haul: Fully Welded Steel with Corrosion Protection

This hitch is made from fully welded steel for strength and reliability. The gloss black powder coat finish is layered over a protective base coat to resist rust and corrosion through years of exposure. It’s built tough enough to handle road grime, wet weather, and heavy use without wearing down. From frequent towing to weekend gear hauls, it’s made to stay solid and look good doing it.

Specs

Dimensions

Receiver opening: 2" x 2"

Weight and Capacity

Rating: Class III
Maximum gross trailer weight: 5,000 lbs
Maximum GTW when used with weight distribution: 6,000 lbs
Maximum tongue weight: 500 lbs
Maximum TW when used with weight distribution: 600 lbs

Warranty

Limited lifetime warranty

13160 Curt Class 3 Trailer Hitch Receiver

Installation Details 13160 Installation instructions

This Product Fits The Following Vehicles

1984 - 2001 Jeep Cherokee

Customer Satisfaction Score:

96% were satisfied with this product

4% of customers were not satisfied

Product did not meet expectations
Too difficult to install

4% of customers were not satisfied

Product did not meet expectations
Too difficult to install

4.9

64 reviews

5 Stars		(58)
4 Stars		(5)
3 Stars		(1)
2 Stars		(0)
1 Star		(0)

by: James D. 04/18/2011

designed. It uses the holes that are already located in the Jeep's uni-body. On one side, the holes have a nut that you thread the bolt into, but on the other side, you have to drop the plates into the uni-body channel and then feed the carriage bolt through it with a "fish wire" (never used one before last night).

I had to remove the bumper, bumper support (on the non threaded left side) and the trip piece on the rear quarters. Also, on the right hand side with the exhaust, I had to bend the heat shield (between the tail pipe and gas tank) and leave one bolt un-done as the thickness of the hitch displaces too much.

The instructions said that it would take 45 minutes...it took me 4.5 HOURS! I am mechanically inclined too, but this was ridiculous. I have even installed my own lift kit on my Jeep.

Needless to say, I did save $170 over going with a hitch company in town that I had talked to. However, it was still a lot more difficult that it should have been.

I purchased this one because it was made in the USA. Good quality and good product, just hard(er) to install.

Looks good too.

Click to Enlarge

by: Andrew G. 09/21/2011

only 'tough' thing about it is threading the bolts through the frame, but with the provided fish wire, it wasn't overly difficult- It just took a little time. A hint- Make sure the square nuts that go inside the frame rails are aligned in the proper way before you insert them into the frame, there is NO room to turn them once they're in there- You have to take them all the way out, turn them, then re-install.

Overall install time was about 40 minutes, most of which was getting the bolts in place. It was easy enough for anyone to do!

Looks great- Like it's supposed to be there.

Click to Enlarge

by: Marshall 10/20/2025

1997 Jeep Cherokee

This Hitch Receiver is as good as it gets. The Old Jeep fits it perfect. The harness kit for the lights hookup took a couple hours and everything is working great.

by: Larry 08/20/2012

2001 Jeep Cherokee

a skidplate especially. Curt obviously never installed one on a 97 thru 2001 Cherokee. The instructions were a revised copy which makes it just seem like no effort was made "Twice" at least. But it looks nice, Made in USA, functional.

Click to Enlarge

by: Isaac 10/26/2020

1999 Jeep Cherokee

Great hitch, like the look over square tube. Install was straightforward and easy, took about 30 minutes. Had a few days and already used several times. Feels very solid pulling down the road.

Click to Enlarge

by: Pat 12/24/2013

1997 Jeep Cherokee

Product looks great. Arrived in two days to Indiana. Installation was easy except for cleaning out existing threaded frame holes on vehicle. Great experience dealing with eTrailer. I have ordered from them probably 6 different times and have always been happy. The instructions shipped with the hitch showed the frame (threaded holes) rails on the wrong side. I had already watched the video which was correct so that was not an issue. Took about three hours to install because of tapping threaded holes.

Pat One Year Later

12/27/2014

The trailer hitch has been tremendous. It has been installed one year and I love it.

by: Mark 09/02/2025 One Year Later

This is the second time I've purchased this hitch. I own two Jeep XJ Cherokees. I wouldn't want any other.

by: Justin B. 05/28/2013

2000 Jeep Cherokee

I'm a returning customer. Item was in-stock, shipped quickly, exactly as described, installed easily, on-line videos were good, good notifications of shipping/tracking info, part packed well, only way things could have been better was if it was free...haha, but seriously, all of those good comments, and etrailer was still cheaper than other sites too. Totally satisfied.

Justin B. One Year Later

5/28/2014

A year later, my hitch is still glossy and rust free...the utility trailer I bought locally right after installing the hitch, not so much. So they did something right with the coating of the hitch.Im still very happy with the purchase and would recommend to anyone.

by: Sammy D 11/18/2019 One Year Later

It's a great, simple design, easy to install. It also looks much better than the other blockier/squared-off ones on the market. It has worked flawlessly... as any good hitch should do. A+ product

Sam One Year Later

11/18/2020

Excellent. Fit and finish is great.

by: Rick B 08/03/2017

Great looking Hitch. Shipping was quick and on time. Installer was very happy with how quick and easy it was to install. I highly recommend this product.

Raymond B. One Year Later

8/3/2018

EXCELLENT !! I pull my 8X12 Tandem Axle Trailer every day. Thank You for Great Products!!

by: Brock 04/09/2025

2000 Jeep Cherokee

Package was shipped out very fast. I got it within three days. It came past very well no damage at all will definitely use etrailer in the future

Gwendolyn Y.

4/10/2025

That's great to hear, Brock! What are going to be hauling with your Jeep?

by: TJ 06/23/2017 One Year Later

1999 Jeep Cherokee

The hitch is still holding up great. I have used it several times for towing and countless times for a hitch cargo rack and bike rack. Super solid, no signs of the powder coat failing.

by: Robert 09/26/2022

1998 Jeep Cherokee

Very nice, heavy duty hitch. On my 1998 Jeep Cherokee I found it pretty easy to install after removing the rear bumper. I guess it could be done without removing the rear bumper but would be much more difficult. Removing bumper is fairly easy with a decent set of tools. Also gave an opportunity to clean back there. Fishing the bolts through the frame rail was easier than expected. Extensive hardware package though I wound up replacing other hardware at the same time.

by: Brian D. 03/09/2015

1997 Jeep Cherokee

Installed this hitch on a 1997 Jeep Cherokee Country Edition. Almost everything went in without an issue. On the driver side, where no weld nuts are present, part number CM-SP25 had to be ground off on one side approx. an 8th of inch. The bolt would not line up with the existing hole. Everything else was a breeze. Video of the installation was a definite plus. Item was shipped extremely fast and everything arrived without damage. Will buy from again.

by: Robert 03/13/2018

The products I received were exactly what I wanted.Karen F. answered all my questions and was very pleasant to work with. She is a great asset to your company. The product fit perfectly. I did have to tap the rusted bolt holes on my jeep which did take a little time but that was the only hold up. The wire harness took ten minutes to install and works perfect. Overall very pleased with everything. Also was told it would take about a week to get but I had it in three days.Nice surprise. Would recommend this company. Great job!

by: Tim W 12/15/2015

1997 Jeep Cherokee

The hitch receiver arrived quickly and included enough options for my 1997 Cherokee. The fishwire helped out in getting the bolts and backing plates in place. The deliver box was a bit damaged, but the contents were unharmed.

by: MtFeralNative 10/29/2021

There may be some slight discrepancy with your jeep. I was able to install 7 of 8 bolts as my driver side rear bolt was threaded vs the videos -(online) - showed blank. Also, I never received the two threaded nuts for the rear 1/2" bolts. I did receive extra parts, nuts, bolts and washers it took me about 3hr after starting the process wrong. With the rectangular spacers it's kinda like the game Jenga. I had songs fine stainless welding wire that I was able to bend like "z" fish sticks and get the plates in order. I think it's variation of the vehicle. I was able to get 7 of the eight bolts in, which will suffice at a grade 8 bolt. My passenger side rear bolt is something smaller than the kit sent. etrailer was nothing but exceptional and expedient

Click to Enlarge

Sierra K.

11/1/2021

It sounds to me like you received the wrong hardware kit. Customer Service will reach out to you.

by: Dic C 09/30/2013

1998 Jeep Cherokee

I just purchased this hitch and have it installed. Hitch installed very easily with some help from a friend. Have not had a chance to use yet, but will within a month and do not have any doubt this will perform flawlessly because of the design. Hope to have some photos uploaded very soon. Definetly will recommend this hitch to friends.

by: Lawrence 09/09/2017 One Year Later

The hitch is great. Fit well easy to install works fine. The wiring adapter the same as any other one adapter I've used sucked. rotted out quickly. No longer works

by: Sheldon 08/06/2020

Another textbook transaction with etrailer.com, you guys have yet to fail me!!!! The UPS guy was delivering my hitch as I arrived home. It was installed before dark!!! Looking forward to my next project that I can use you on!!! Until then, keep up tut great work, YOU ROCK!!!

by: Sidney 11/09/2016

2000 Jeep Cherokee

The "Curt" class III hitch and T-connect wiring harness arrived quickly to my address and were not difficult to install. Ready, set, Tow!

by: Tyler 09/22/2018

2001 Jeep Cherokee

Great hitch! It fit perfect and even came with extra hardware if something went wrong on the side with the factory nuts. They were too rusty to use so I had to rip out the factory nut tray and feed the Curt bolts though on the passenger side which saved the day! Great product.

by: DB Branan 03/20/2022

I have never heard of these folks before, but they had what I needed, and included a video on installation. So I took a chance. My hitch arrived on time in two days which was outstanding. It was in perfect condition without a scratch. Guess I’m going to have to do that.
But after this transaction, I look forward to doing business in the future!
DB Branan

by: Jarrett 09/14/2022 One Year Later

Great hitch for pulling your buddies out of mud holes. My last hitch ripped in half, this one is much better built and looks much better with the curved design in my opinion

by: C. Chew 07/29/2015

2010 Jeep Cherokee

Received my hitch in a timely manner. Easy to install. Only hold up was not a product problem but a problem with existing thread holes on the Jeep Cherokee I was installing the hitch on. Needed to re-tap and thread the holes with a metric thread of M12-1.75. Also watched the online video and the video claimed on set of bolts would be marked 8.8 but that is incorrect the supplied bolts were marked as 10.9.

true

Show More Reviews

See what our Experts say about this CURT Trailer Hitch

Do you have a question about this Trailer Hitch?

Replacement Hardware For Curt Trailer Hitch on 2000 Jeep Cherokee
Hi Steve; we do indeed have replacement hardware for the Curt hitch that fits your 2000 Jeep Cherokee; what you will need is the following: - Replacement Hardware Kit for Trailer Hitches # RHK All you need to do is click # RHK, enter the hitch part number in the "Hitch Item Number" box and you're set. The two Curt hitches that fit your Jeep are parts # 13084 and # 13160. If you take a look at the photos of the hitches below you should be able to compare them to what is on your Jeep to...
view full answer...
Dimension of Pin Hole on Curt Class III Hitch Receiver
Good news, I can help you figure out which hitch pin you will need for your Curt Hitch # 13160. The # C21504 is the recommended hitch pin for your 2 inch Curt Class III Hitch. The pin measures 5/8 inches wide, and the diameter of the hole on the hitch is 5/8 inches as well. If you would like to get a locking hitch pin to secure the item you are transporting from theft, I would recommend the etrailer # e98882.
view full answer...
Differences Between Curt Hitches 13084 and 13160 for a 1999 Jeep Cherokee
The install for the two hitches you mentioned are going to be the exact same. The difference is that the # 13084 has a square cross tube and the part # 13160 uses a round cross tube. It's purely an aesthetic thing. Some people prefer the look of one over the other. Since the square tube hitch # 13084 costs less it would be what I would go with. I attached an install video for this hitch for you to check out as well.
view full answer...
Does Curt Hitch Fit All Models Of 2000 Jeep Cherokee XJ and Trailer Wiring Recommendation
The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part # 13084 is a fit for all models of the 2000 Jeep Cherokee however XJ is not a model. XJ is what the second generation (1983-2001) of Jeep Cherokees are called so the hitch will fit your 2000 Jeep Cherokee however it will require drilling through the frame mounted, closed sided steel skid shield if the Jeep has one which is why I recommend the Curt Trailer Hitch Receiver part # 13160 because it does not require drilling at...
view full answer...
What Is The Tube Size Of The Curt Class III Trailer Hitch Receiver # 13160
The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13160 has a 2 inch square receiver opening and the crossbar is 2-1/2 inch round tube steel. I went into our warehouse to measure it for you. It is a confirmed fit for 1984-2001 Jeep Cherokee models.
view full answer...
Is Curt Class III Trailer Hitch # 13084 a Correct Fit for the 1997 Jeep Cherokee Sport
Thank you for providing the photo of the underside of the frame rail on your 1997 Jeep Cherokee Sport. The 2-inch Class III hitch you purchased, part # 13084, is indeed a correct fit for your Cherokee. We do also offer a round-tube hitch, also from Curt, which is part # 13160. These differ only in their cosmetics, one being a square-tube design that is slightly less visible beneath the bumper than the round-tube version. Both offer identical capacities and both install in the same manner....
view full answer...
What Is The Difference Between Curt Trailer Hitch # 13084 and # 13160
The only difference between the Curt Trailer Hitch # 13084 and the Curt Trailer Hitch # 13160, is the shape of the tubing. Curt Trailer Hitch # 13084 has a square-tube design while the Curt Hitch # 13160 has a round-tube design. The square-tube hitch will be more visible on the back of your Jeep while the round-tube hitch will be tucked up just a little more. The round-tube hitch is designed to be a more sleek design. Both the Curt Hitch # 13084 and # 13160 have the same towing and tongue...
view full answer...
Replacement Installation Hardware Kit for Curt Class III Hitch Part # 13160
We can certainly get you a replacement hardware kit for the Curt Class III trailer hitch, part # 13160. The part number for the install hardware is # RHK. Use the provided link to go to the product page, and in the hitch item number field, input part # 13160. From the drop down menu, select Curt, and select a quantity of one.
view full answer...
Replacement Hardware Kit For Curt Trailer Hitch Receiver # 13160
The replacement hardware kit for Curt Trailer Hitch Receiver # 13160 is # RHK. When you click on the link, there will be a section to enter the Hitch Item Number, just enter "13160". There is a drop down to select the manufacturer, just select "CURT". The cost is also on the same link.
view full answer...
Trailer Hitch Recommendation for a 1994 Jeep Cherokee with a 4 Bolt Connection on Each Side
All of the Class III trailer hitches that we offer for your 1994 Jeep Cherokee use a 4-bolt attachment. On each side, three bolts attach to the frame rail and one bolt attaches to the impact bar at the end of the frame rails. I have attached a link to all of the Class III trailer hitches offered for your Jeep. The hitch that I recommend is the Curt Class III Round Tube Hitch, # 13160. The round crosstube will not be as visible from the rear of the Jeep as the square crosstube hitches...
view full answer...
Recommended Easy to Install Trailer Hitch and Wiring Harness for 2001 Jeep Cherokee
The Curt Class III Round Tube Receiver Hitch # 13160 is compatible with your 2001 Jeep Cherokee and requires no drilling or welding for installation. It is rated for 5000 lbs., however you will still be limited to the towing capacity of your Cherokee which, from my research, is only 2000 lbs. You will want to verify with your owners manual just how much weight you Jeep can tow. The Tekonsha Wiring Harness # 118354 is custom-fit for you Cherokee, and plugs in behind an interior trim panel...
view full answer...
Recommended Trailer Hitch for 1997 Jeep Cherokee
The Draw-Tite Class I receiver you mentioned, part # 24827 is a vehicle-specific item that will fit a 2005-2010 Scion tC only. To see the various hitches available for a 1997 Jeep Cherokee, click the provided link. I would recommend the Curt Class III receiver, part # 13160. A Class III receiver will allow you to maximize the towing capacity of your Cherokee. The more common 2 inch receiver size will also allow you a better selection of hitch accessories like bike racks or cargo carriers,...
view full answer...
Can a 1952 Terry Trailer Be Towed By a 2006 Nissan Murano and What Parts Will Be Needed
To get the weight of your 1952 Terry trailer I would try to see if it has any type of identification plate or sticker on the trailer itself or the trailer axle that might indicate the weight of the trailer. The other choice if you cannot find a plate is to get it weighed on a local commercial scale at a truck stop, quarry or material supply center. I am including a link to a FAQ page that will talk about determining the weight of your trailer. After you find out the weight of your empty...
view full answer...
Trailer Hitch Recommendation for 2001 Jeep Cherokee
Although we offer several different hitches for a 2001 Jeep Cherokee, I'd recommend the Curt Class III, part # 13160. The hitch uses a round tube crossbar, which most folks better looking than the square tube the other hitches use. The hitch has a full 5000 lb towing/500 lb tongue weight (maximum amount of downward pressure that can be applied safely to the hitch) capacity. The hitch is also US made. If you'll be towing an RV with electric brake, he'll also need a # 118354 trailer wiring...
view full answer...
Why Do Weight Ratings for Curt, Draw-Tite and Hidden Hitch Class III Trailer Hitches Vary
Your 2001 Jeep Cherokee is a vehicle that can be fitted with either of two different classes of hitch, a 1-1/4-inch Class II hitch OR a 2-inch Class III. As you noted, even within the Class III grouping there are varying tongue weight (TW) and gross trailer weight (GTW) ratings. Curt Class III hitches # 13084 and # 13160 do have a 500-lb TW rating while the Draw-Tite # 75054 Class III hitches is rated lower. All of the Class III hitches for your 2001 Jeep Cherokee are shown on the link...
view full answer...
Trailer Hitch for 2001 Jeep Cherokee With Skid Shield
Though I'm not 100 percent sure what you are referring to in terms of "clearing" the skid shield, there are different installation instructions (which are linked) for both hitches in regards to that shield on your 2001 Jeep Cherokee which may be what you are looking for. Curt hitch # 13160 will give you 20 inches of clearance from the ground, and according to the install manual you are going to loosen the skid shield's bolts and place the hitch flange between the Jeep's frame and skid...
view full answer...
Hitch Recommendation for a Jeep Cherokee that Will Put Hitch Closest to the Ground as Possible
From the top of the hitch opening to ground the Curt Hitch part # 13084 that you referenced will be about 15 inches depending on the height of your vehicle. The Curt Hitch part # 13160 will sit about 5 inches higher. So going with the # 13084 will place the hitch opening approximately 5 inches closer to the ground
view full answer...
What is the Difficulty Level for Installing the Curt Trailer Hitch on a 1998 Jeep Cherokee
I have attached our installation video of the Curt Class III Trailer Hitch, # 13160, on a 1998 Jeep Cherokee for you to check out. I have also attached a link to the installation instructions. Curt estimates that the install time for this hitch should be approximately 45 minutes. The estimated install time is a time that Curt feels it will take someone who has experience installing a trailer hitch to complete the install. The biggest hang up people have with hitch installation is when...
view full answer...
What Is Needed To Tow A 3,500 Lbs. Terry Travel Trailer With A 1993 Jeep Cherokee
You will want to check your owners manual or with the Jeep dealer for the gross towing weight capacity of your 1993 Jeep Cherokee to make sure the towing capacity is not exceeded. The two Curt hitches will be the hitches with the highest towing weight capacities. The Curt Class III 2 Inch Hitch, # 13160, you have referenced and the Curt Class II 2 Inch Hitch, # 13084, will both have a 5,000 lbs. towing capacity and a 500 lbs. tongue weight capacity. If your vehicle has tow hooks they will...
view full answer...

Do you have a question about this Trailer Hitch?

Info for this part was:

Test Fit:

Joe V

Test Fit:

Randy B

Expert Research:

Mike L

Expert Research:

Michael H

Expert Research:

Jeff D

Expert Research:

John H

Expert Research:

Adam R

Video by:

Andrew K

Video by:

Zach D

Written by:

Lindsey S

Video Edited:

Joshua S

Video Edited:

Jacob T

Video Edited:

Mike H

Video Edited:

Dustin K

Updated by:

Wilson B

Updated by:

Amanda M

Updated by:

Kristina F

Updated by:

Michael B

Updated by:

Isabelle B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.