Choosing a Ball Mount with the Right Rise or Drop to Tow a Trailer Level with a 2017 Honda CR-V
Updated 10/18/2017 | Published 10/16/2017
Products Featured in This Question
Question:
I just installed the Draw rite 76128 2” hitch on my 2017 Honda CR-V AWD. I’m looking for hitch balls now. Is there a standard for this vehicle. It would be mostly for towing small machinery such as log splitter and such. Just wondering which ball unit to buy that has the proper it rise for the vehicle.
asked by: Kevin G
Expert Reply:
Since Draw-Tite trailer hitch # 76128 is a Class III hitch with a 2 inch receiver you can use pretty much any ball mount that will fit. But to choose one that has the right rise or drop to tow a trailer level there are just 2 measurements needed. Once that is figured out you can select a ball mount and then a compatible ball.
You will need to have the vehicle and trailer on level surfaces to measure. Use the trailer's jack to make sure the trailer is level before measuring. Measure from the ground to the bottom of the coupler. Then on the 2017 Honda CR-V you will measure from the ground to the top of the receiver opening.
If the coupler is higher then the difference between the 2 measurements is the amount of rise you will need. If the hitch on the CR-V is higher the difference is the amount of drop you will need. I have linked a help article that shows how to measure for you.
Another option is to use an adjustable ball mount such as # TK5007. This ball mount has a maximum rise of 8 inches and max drop of 10 inches and is adjustable in 2 inch increments. It takes a ball with a 1 inch diameter shank such as # 19260 for a 1-7/8 inch ball, # 63845 for a 2 inch ball, or # C40007 for a 2-5/16 inch ball.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Search Results: 1~7/8 ball
- Q&A: Selecting The Correct Trailer Hitch Ball Mount For a 2020 Honda CR-V
- Video: All About the Curt T-Connector Vehicle Wiring Harness with 4-Way Flat Trailer Connector
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Way Flat Trailer Connector
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Q&A: Does Curt Trailer Hitch For 2022 Subaru WRX Come Out Under the Bumper or Through Bumper Cut Out
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer hitch
- Video: Curt Powered Tail Light Converter Installation - 2023 Kia Telluride
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer wiring
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Suspension Enhancement
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer tires and wheels
- Article: How to Measure for Trailer Hitch Drop
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Clean Up Your Trailer Wiring
- Shop: Brake Controller
- Search Results: trailer jack
- Q&A: Trailer Hitch and Wiring for 2027 Kia Telluride
on Trailer Hitch
