Great for towing your light-duty camper or utility trailer, insert this adjustable mount into your 2" hitch to get 3 stacked 2" receivers. Included ball mount accepts Gen-Y hitch balls (sold separately). Matte black powder coat finish.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the Gen-Y Phantom two inch hitch ball mount. Has a 5,000 pound towing capacity. Now this is an adjustable ball mount, so it'll let you hook up your trailer to your tow vehicle. The shank portion right here is what'll slide into your two inch hitch receiver on your vehicle. And up front here, this ball platform provides a mounting point for a hitch ball.
Now the hitch ball is not included. We do sell those separately. You do want to get a hitch ball that'll have a shank diameter of one inch. That's the diameter of the hole that the ball goes in. If you notice it has three stacked two inch receivers.
It'll accept the ball platform as well as other Gen-Y hitch mounted accessories. Does come with this stainless steel pin and clip, which is included to secure the ball platform or accessory to the shank. And we mentioned it's an adjustable height, so it'll let you tow trailers of different heights with the same vehicle. So to change the height, all you have to do is pull out the clip, pull out the pin, and then you can slide out your ball mount, put it into the middle one, put it into the top one, whichever you want. Once you get it to the height you need for your application, just line the hole up.
And once you get the hole lined up, slide your pin through, put your clip in there, and you're locked and all ready to go. Now this will give you a maximum drop in this position of 4 1/2 inches. If you flip this over in your hitch and put this in the highest position, it'll get you a maximum rise of 4 1/2 inches. It is a durable steel, has a zinc primer, and then a matte black powder coat on it to resist corrosion. Now when you do install this into your hitch receiver, it will require a hitch pin and clip or a hitch lock for securing it to the receiver.
Now those items we do sell separate on our website. The pin hole diameter back here is 5/8 of an inch. Now this part is made in the USA. The application again fits two inch by two inch trailer hitch receivers, gross towing weight capacity of 5,000 pounds, maximum tongue weight capacity of 500 pounds. And I do wanna give you a measurement. We're gonna measure from the center of the hitch pin hole to the center of the ball hole. So if we put a ruler on that, center to center is right at 11 1/2 inches. That's gonna do it for a review on this Gen-Y Phantom two inch hitch ball mount with the 5,000 pound capacity.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.