Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This surge-type actuator packs serious strength with a 20,000-lb gross towing weight and a 2,000-lb maximum tongue weight rating. Built for trailers with hydraulic drum brakes, it uses the trailer’s momentum to deliver solid stopping power when the tow vehicle slows. It’s made for heavy-duty work like farm or construction trailers where reliability matters every time you hit the brakes.
The heavy-duty master cylinder is made from a rustproof composite material that stays efficient under pressure. Inside, an acetal copolymer lining keeps the telescoping action smooth as the actuator moves in and out. This setup not only resists corrosion but also delivers 50 percent greater fluid displacement than standard cylinders, giving consistent braking force even on long hauls.
A tough steel body and black powder coat finish mean this actuator is ready for hard use and exposure to the elements. The coating helps fight off corrosion, keeping it looking sharp and performing well even in rough or wet environments. It’s designed to hold up under constant outdoor work without showing wear.
An 8-inch adjustable channel gives you flexibility when setting up your trailer coupler. With three mounting positions, you can line up your coupler (sold separately) so your trailer rides level behind your tow setup. Whether you’re using a standard ball, lunette ring, or clevis attachment, it’s easy to position everything just right for stable towing.
This actuator includes a built-in breakaway feature that helps stop the trailer if it ever disconnects unexpectedly. It’s an extra layer of safety designed right into the unit—ready to engage automatically if needed, keeping your trailer under control in an emergency.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody. This is [email protected]. Today, we're going to take a look at the STEM coat, eight inch adjustable channel center, hydraulic drum, brake actuator with a 20,000 pound gross towing weight capacity.Now this hydraulic actuator will activate your trailer's brakes when your tow vehicle slows or stops. Basically what happens is when you apply the brakes in your tow vehicle, deceleration will occur and the momentum will push your trailer toward the rear of your vehicle. So with the surge brake systems, the actuator is then triggered as your trailer moves forward. Once your tow vehicle starts to slow down.
So when this happens, this actuator will contract applying force to the master cylinder back here, and this in turn supplies, the necessary hydraulic pressure to engage your trailer's brakes.It does use an asset tele co-polymer lining on the inside, which provides a nice smooth operation. As this actuator will telescope in and out.You can see at the front here, it has this nice adjustable channel has three different mounting positions for your coupler attached to now the couplers not included that we do sell separately. This is a heavy duty steel construction has a nice black powder coat finish on it to resist corrosion.And at the very back here underneath, you can see there is the composite master cylinder, which is very durable and efficient. It uses glass reinforced, nylon construction to resist rust and corrosion has a nice, very large reservoir provides increased capacity for your brake fluid and right up here at the top, it uses this automotive style diaphragm cap, which helps create a completely enclosed system and helps prevent contamination of your brake fluid. Now it does include this breakaway cable.That's up to your breakaway switch right here, and that is required.
And basically what this does is you would hook this to your tow vehicle. And if it happens, if your trailer happens to come detached from your tow vehicle, it would pull on this cable, which would activate the breakaway, which would apply the pressure in the master cylinder to the brakes to prevent a runaway situation. So that is all included.Now this is a weld on installation. It is made in the USA few specs on this. Again, this is for trailers with hydraulic drum brakes, gross towing weight capacity, again is 20,000 pounds.
Maximum tongue weight capacity is 2000 pounds.Give you a few measurements on this, the channel itself, the inside with where your coupler will insert. It's going to be right at three inches, the channel height. And the bottom to the very top is right at eight inches. And it is designed to Mount onto a straight three inch wide trailer tongue. This goes by the model number of da 20.
And one last note on this actuator is because this actuator does not include a reverse lockout at the back here on the master cylinder. It is recommended that you equip your trailer with free backing brakes so that you can drive in reverse without the actuator triggering your trailer's brakes. But that should do it for the review on the Demco eight inch adjustable channel center, hydraulic drum brake actuator with the 20,000 pound gross towing weight capacity.
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
Ratings & Reviews

Jose
9/16/2025
Excellent product. Works very good


David W.
8/8/2024
Working out great!

Jose
6/24/2025
Excellent. Fit very good with the bulldog coupler. To use a strong screw
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.






Phil
1/31/2025
Its working great. No complaints.