Hey Alfredo! Great question. The Furrion Vision S+ Wireless RV Observation System #FR57AD, #FR74AD, and #FR64AD are all capable of recording. The 7" monitor has a micro-SD card slot (must be at least Class 10) and supports cards up to 128GB.…
Hello Justin, Yes, we do have some options with the Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire - Load Range E #AM10140 already mounted to a wheel. They are all a 5 on 4 1/2" bolt pattern: - Karrier S-Trail Radial Trailer Tire with…
Yes, but it's going to be an extremely small amount and you'll need to add springs that have more leafs than your current ones. You'll get maybe 1/4" to 3/8" per leaf of lift. If you could get the weight off of one side of your…
Good morning Sean, the etrailer Trailer Tongue Tool Box 3.4 Cu Ft #e64VV has the following inside dimensions: -17" inside height -13-3/4" inside depth (front to back) -33-1/2" inside width on back side and 15-3/4" width on front…
Hey Sean, From the bottom of the etrailer Trailer Tool Box #e44VV to the bottom of the gas strut bracket is right at 19". There's also the latching mechanism on the front of the box that sticks out inside the box that that's about…
The diagram you attached shows a 7-way wired up in what is considered the "traditional way." If you check out the chart I attached you will see the three ways (really only 2), that a 7-way can be wired. The Featherlite is wired up like the…
Hey Edward, unfortunately mounting hardware is not included with the Pack'Em Trimmer Rack for Utility Trailers #PK-6S but you should be able to get that at any local hardware store. The grade 8 bolts, nuts, and washers is what I'd get, a lock…
Hey Genny, the membrane that comes with the LaSalle Bristol RV Roof Replacement Kit w/ XTRM Membrane #344270KIT21 comes in a big roll. The thickness of the membrane is 27 MIL which makes it about .68 inch thick. Do you have any other questions? I…
Thinking about making the switch to disc brakes, always a great idea! We definitely have the parts to make the switch. Unfortunately, I don’t have a database showing what components are installed on each camper (I wish one existed, it would make my…
Hey Scott, this is a really great question. So a 25 foot long Sprinter is only a little bit longer than a standard Sprinter which is perfectly fine to use the Kuat Piston Pro bike rack #KU98VR to it's full capacity of 67 lb per bike. The big…
Take Control of Your Trailer Cargo—Secure, Store, and Transport with Confidence.
If you need a place to keep your tools handy, check out our tool racks, hooks, and hangers. We also have ladder racks for external storage. Don’t forget to grab an E-track, tie-down anchor, and tie-down strap to help keep your cargo from shifting in transport. For the car hauler, we have bottle racks for fuel storage, winches and ramps to help you get loaded up, hooks and hangers for your helmets, as well as racks to store your tires. To keep things safe and secure in your utility trailer, grab a tailgate lift, a tarp or net, a spare tire carrier, or a tool box. Organize your landscape trailer with a trimmer rack, cooler rack, shovel rack, blower rack, or other multi-tool rack.Stop your boat from bouncing or shifting with transom, bow, gunwale, or PWC straps. Help get the boat trailered from the water with a guide or winch. Keep your saddle, bridle, or brushes handy in your horse trailer, and add a water caddy to keep your horses hydrated and happy.With over 75 years of assisting our neighbors and customers, over 1 million photos and videos taken to make sure you’re getting exactly what you need, and over 35 thousand installations completed, we’ve got the product know-how and experience to help you make the right choices for the job at hand.
How do I install E-Track systems in my trailer?
Installing an E-Track system makes securing cargo easier and more flexible. Start by planning where you need anchor points—along the floor, walls, or both. Make sure the surface is clean and free from obstructions, then bolt or screw the tracks into place using the right fasteners for your trailer type. Once installed, you can use e-track straps, tie-down rings, or load bars to keep cargo from shifting during transit. For 3 easy steps, check out our guide.
How do I keep lightweight cargo from shifting in my trailer?
Small or lightweight cargo is just as likely to shift as heavy items if it’s not secured. Cargo nets and load bars are great for keeping loose items in place, while rubberized mats on the floor can help prevent sliding. For enclosed trailers, hanging storage options or mesh organizers can keep smaller gear secure without taking up floor space.What’s the best way to tie down oversized or awkwardly shaped items?Odd-shaped cargo can be tricky to secure, especially if it doesn’t fit neatly against the trailer walls. Using a combination of ratchet straps and E-Track anchors gives you multiple points to tie down irregular loads. Foam padding or corner protectors can prevent damage to fragile edges, and for especially large items, adding a secondary support strap or brace can help keep things from shifting.
How do I prevent tie-down straps from loosening on long trips?
Vibrations from the road can cause straps to loosen over time, especially on rough terrain. To prevent this, always double-check strap tension after driving the first few miles. Using strap tensioners or cam buckle straps can also help keep pressure consistent. If you’re hauling long-distance, making periodic stops to check your cargo and re-tighten straps as needed is a smart habit.
What’s the best way to store cargo control equipment when not in use?
Keeping straps, nets, and load bars in good condition starts with proper storage. Coiling straps neatly and storing them in a dry, shaded area prevents UV damage and mildew. Dedicated storage bins or wall-mounted holders help keep tie-downs organized in your trailer or garage. Avoid leaving straps or load bars loose in the trailer, where they can get damaged or tangled with other gear.