1. Trailer Parts
2. Trailer Cargo Organizers
3. Hooks and Hangersx

Yes, we do have a roof rack that will work with the rounded roof on your Interstate cargo trailer. It is the Rack'Em Fitz-All Enclosed Trailer Ladder Rack item #RA-28. This roof rack has a 400 lbs capacity and mounts to the side of your…

The box dimensions of the Locking Floor Mounted Storage Box for Enclosed Trailers part #M387FR are 27-3/4" long x 18-7/8" wide x 7-1/8" tall. I have attached a photo below.

While the Rack'Em Fitz-All Enclosed Trailer Ladder Rack #RA-28 was designed to fit on trailer with a rain gutter, we have had several install it on their trailer without rain gutters. I have also included our review video below where you can…

Hey Lynn, we generally don't recommend running more than one set of suspension enhancement on a vehicle because the performance of the two kits together has never been tested and most likely if you need two you are overloading things. I would…

Yes. Based on the pictures you provided it does appear your trailer has rain gutters so the Rack'em Fitz-All Enclosed Trailer Ladder Rack #RA-28 will bolt on just fine. I included an installation video of the #RA-28 and a picture of the #RA-28…

The locking storage box #M387FR mounts in the floor. As long as you have the 19" wide x 29" long x 7-1/4" deep space, it can absolutely work in a toyhauler. The box recesses into the floor and is powder coated for protection against…

The Malone TopTier Load Bar Kit for Utility Trailers part #MPG493 fits 4' wide and 5' wide trailer decks so it would not be compatible with your 6 foot wide utility trailer. The Malone Crossbar Conversion Kit for Standard Utility Trailer part…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR are able to lock into place at 30 and 60 degrees as stabilizers. They also have the 90 degree position where it is rated for 1,929 lbs and then the stored position.

Yes you can swap out the angled U-bolts for square U-bolt to better match your trailer on the Malone TopTier Load Bar Kit for Utility Trailers part #MPG493. These are 3/8" U-bolts that you will have to provide yourself as we do not offer an…

We have seen people mount storage boxes on either side of the nose of a V-nose trailer like what you see in the picture I attached. The part #DZ91717P would work well if you have room for it like that. The dimensions of the box are 36" long…

The best option we have for you would be the Rack'Em part #RA-28 which is designed to fit the roof of enclosed trailer and provides crossbars that are up to 8-1/2 feet in length but can adjust down to 4 feet.

Yes, we do have a roof rack that will work with the rounded roof on your Interstate cargo trailer. It is the Rack'Em Fitz-All Enclosed Trailer Ladder Rack item #RA-28. This roof rack has a 400 lbs capacity and mounts to the side of your…

The box dimensions of the Locking Floor Mounted Storage Box for Enclosed Trailers part #M387FR are 27-3/4" long x 18-7/8" wide x 7-1/8" tall. I have attached a photo below.

While the Rack'Em Fitz-All Enclosed Trailer Ladder Rack #RA-28 was designed to fit on trailer with a rain gutter, we have had several install it on their trailer without rain gutters. I have also included our review video below where you…

Hey Lynn, we generally don't recommend running more than one set of suspension enhancement on a vehicle because the performance of the two kits together has never been tested and most likely if you need two you are overloading things. I…

Yes. Based on the pictures you provided it does appear your trailer has rain gutters so the Rack'em Fitz-All Enclosed Trailer Ladder Rack #RA-28 will bolt on just fine. I included an installation video of the #RA-28 and a picture of the…

The locking storage box #M387FR mounts in the floor. As long as you have the 19" wide x 29" long x 7-1/4" deep space, it can absolutely work in a toyhauler. The box recesses into the floor and is powder coated for…

The Malone TopTier Load Bar Kit for Utility Trailers part #MPG493 fits 4' wide and 5' wide trailer decks so it would not be compatible with your 6 foot wide utility trailer. The Malone Crossbar Conversion Kit for Standard Utility…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR are able to lock into place at 30 and 60 degrees as stabilizers. They also have the 90 degree position where it is rated for 1,929 lbs and then the stored position.

Yes you can swap out the angled U-bolts for square U-bolt to better match your trailer on the Malone TopTier Load Bar Kit for Utility Trailers part #MPG493. These are 3/8" U-bolts that you will have to provide yourself as we do not offer…

We have seen people mount storage boxes on either side of the nose of a V-nose trailer like what you see in the picture I attached. The part #DZ91717P would work well if you have room for it like that. The dimensions of the box are 36"…

The best option we have for you would be the Rack'Em part #RA-28 which is designed to fit the roof of enclosed trailer and provides crossbars that are up to 8-1/2 feet in length but can adjust down to 4 feet.