Replacement Brake Assemblies and Hub/Drums for 15k Dexter Axle
Published 03/02/2022
Products Featured in This Question
Question:
Figured it out, the Backing Plates, Magnets and Drums shot.I have part numbers. Left Hand Backing Plate 23-446, R.Hand 23-447. Drums 9-28-1. If needed hub with bearings 8-401-5uc1, Seals 10-56.
asked by: Mike K
1
Helpful Expert Reply:
Is the battery of the breakaway kit charged? Does your tow vehicle have a brake controller installed?
expert reply by:
Jameson C
1
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for Heavy-Duty 15K Axles - 8 on 275mm Oil Bath
- Trailer Hubs and Drums
- Hub with Drum
- Oil Bath
- 3984 / 28682
- Standard Grade
- For 15000 lbs Axles
- 5/8 Inch Stud
- Dexter
more information >
Continue Researching
- Shop: Trailer Wiring
- Search Results: 9~28~1
- Shop: Dexter Trailer Brake Drum for 12,000-lb and 15,000-lb Axles - 12-1/4" x 5" - 8 on 6-1/2
- Shop: Brake Controller
- Search Results: 8~401~5
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12-1/4" - Left/Right Hand Assemblies - 15K
- Shop: Erickson ATV E Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks - 1,500 lbs
- Shop: Trimax Dual Purpose Coupler Lock and U-Lock for 1-7/8", 2", and 2-5/16" Couplers
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Trailer Hitch
- Shop: Dexter Trailer Hub and Drum Assembly for Heavy-Duty 10K Axles - 8 on 6-1/2 - Oil Bath
- Search Results: spare tire mount
- Search Results: 8508211
- Shop: Dexter Trailer Hub and Drum Assembly for Heavy-Duty 15K Axles - 8 on 275mm Oil Bath
- Q&A: Does the Tekonsha P3 Trailer Brake Controller Turn Off or Stay On All the Time
- Shop: Bug Shield
- Search Results: oil bath trailer hubs and drums
- Search Results: trailer brakes
- Search Results: 9~28
- Q&A: What Rims do I Need to Replace Dexstar 17-293 Rims?
- Q&A: Trailer Hub and Drum with 8 on 6-1/2 Bolt Pattern and 9/16 Studs for 7,000 Pound Axles
- Q&A: Replacement Trailer Wheel for Dexstar Wheel 17-293
- Q&A: Recommended Trailer Brake Controller for Class 8 Tractor with Air Brakes
- Q&A: How To Convert Trailer With Slipper Springs To Double Eye Springs
- Q&A: Wiring Diagram for the Dometic Replacement Single Zone Thermostat
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Measure a Trailer Axle
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Testing Trailer Brake Magnets for Proper Function
Mike K.
3/2/2022
Figured it out, the Backing Plates, Magnets and Drums shot.I have part numbers. Left Hand Backing Plate 23-446, R.Hand 23-447. Drums 9-28-1. If needed hub with bearings 8-401-5uc1, Seals 10-56.