1. Home
2. Trailer Parts
3. Horse Trailer
4. Horse Trailer Accessories

The Trailer Horse Pad Screw #PS-8 will allow you to install the 60" Horse Trailer Side Pad #HTP1260BK on your steel trailer/divider. This screw is 3/4" long and will require a 1/8" pilot hole on your steel trailer. I recommend using at…

Are the holes you are referring to threaded? If so then you could drill a 1/4" hole into one of our pads (see below) and then use a bolt to attach them to the wall. If the holes are not threaded then it may just be best to use a few phillips…

We do have a selection of rubber mats that you can add to your gooseneck trailer which I have linked for you to filter through. The thickest rubber mat that we currently have to offer is the Ribbed Rubber Trailer Mat #4872SM. This mat measures…

The holes to attach the Horse Trailer Side Pad part #HTP60BK do need to be drilled but that is standard from the other horse trailer side pads I have researched. We do not carry the screws by the box but the screws that we recommend can be purchased…

You have it right so far, the 4-way connector is just as you have stated. Remember that Yellow has a L in it so that is the left side brake/turn signal and green has a R in it so that is the right side brake/turn signal. The colors for wiring a 7-way…

Hey Joanne, I think I've found what you're looking for with the Surehoof Ribbed Rubber Trailer Mat #4872SM. This measures 48" x 72" which I would think is enough to cover your ramp and help your horse feel a little more comfortable…

Hey Robert, the Torklift hitch you ordered does not come with new rear tie downs and you will need new ones. For that the correct rear tie downs is the part #TLR3510.

No, I would not recommend using it as a step. The etrailer Trailer Tool Box item #e44VV was not designed to hold weight on top of the box. We have one here installed on a trailer and while it is solidly designed the top is not reinforced to withstand…

A 3/8" self tapping screw seems a bit large for the Horse Trailer Side Pads #HTP1260BK but I do recommend always using a washer like the 3/8" #01292006-020-01. This will help spread out the surface area which means the pad is less likely to…

For the installation of your 60-inch horse trailer side pads, I recommend using the Trailer Horse Pad Screw #PS-8. The pads are installed in the trailer directly via the screws and can be mounted wherever is convenient. I have included a photo from…

Yes, you can still install the Timbren Springs #TFRTT350F on your 2013 Ford F-250 without the raised stop like you have seen in the images you found. I have included an image below which shows their other Kit #TFR250SDG for your F-250 on a truck…

The only other extension that will meet your 36" requirement is the Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long #RP45018. This extension would have a maximum gross trailer weight of 7,500 lbs/750 lbs of…