Replacement Axle with 80 Spring Center
Updated 06/05/2023 | Published 06/03/2023
Products Featured in This Question
Question:
I need 80 inch sc to replace old axles. Can you use this?
asked by: Victor
0
Expert Reply:
We do have a selection of axles that use an 80" spring center and a 95" hub face that should meet your needs. You'll just need to choose the correct one based off of weight capacity:
- 3,500 lbs # 7359765-EB
- 5,200 lbs # e55SR
- 6,000 lbs # 7461121-EB
- 7,000 lbs # 8327834-EB
Attached is a link to our selection as well as a video on axles for you to check out.
expert reply by:
Jon G
0
Product Page this Question was Asked From
Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 80 Inch Spring Center
- 95 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: All Parts Needed to Upgrade a 3,500 lbs 86-1/2" Hub Face Axle to a 6,000 lbs Axle
- Q&A: Is B and W Continuum Weight Distribution System Worth it Over Standard WD System
- Article: How to Measure a Trailer Axle
- Q&A: Which Trailer Axle Company is Best, Lippert Dexter or Al Ko
- Q&A: Does Goodyear Endurance ST205/75R15 Radial Tire Come Balanced
- Q&A: Can Too Much Air Pressure In Air Bags Cause Sway Issues When Towing?
- Q&A: How Do I Measure the Drop Distance on a Trailer Drop Axle?
- Q&A: Best Shock Absorbing Suspension Equalizers
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Determine Tire/Wheel Diameter
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Lighting Requirements