Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord
Item # RM-152-98146-7
Our Price: $193.11
Confirmed to Fit
2011 Lincoln MKT
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (250)
- Q & A (0)
- Photos
2011 Lincoln MKT - Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord
- Diode Kit
- Splices into Vehicle Wiring
- Tail Light Mount
- Universal
- Roadmaster
This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and wire your car to operate as a combined system. Includes a 7-way to 6-way straight adapter cord.
Features:
- Complete wiring kit lets you connect your RV's tail, brake, and turn signal lights to your towed vehicle's lighting system
- Wires towed car as a combined lighting system so that brake and turn signals travel along same wire
- Diodes prevent electrical feedback and the damage it can cause to your car's electrical components
- 7-Wire to 6-wire adapter cord allows you to run power from your RV to your towed vehicle
- Straight cord is ideal for all-terrain tow bars and other tow bars that have channel guides
- 6-Way socket wires to harness and mounts on towed car with included bracket
- Sturdy, durable construction
- Powder-coated aluminum casings protect diodes from corrosion
- Electrical cord resists water, oil and chemicals
- Silicone-injected plugs prevent corrosion
- Kit includes:
- 4 Hy-Power diodes
- Wiring harness
- 7-Way to 6-way adapter cord
- 6-Way socket with mounting bracket
- Wire connectors
- Cable ties
- 1 Ring terminal
- 3' Long plastic loom
- Brake light relay (RM-88400 - sold separately) may be required if used with supplemental braking system
- Limited Lifetime Warranty
Specs:
- Maximum amperage: 85 amps
- Maximum voltage: 24 volts
- Adapter cord length: 6-1/2'
- Wire gauge: 16
- Wiring harness length: 30'
Note: For applications that have separate lighting, this kit will cause your brake lights to function as both brake and turn signal lights. A wiring converter (118158 - sold separately) and 2 additional diodes will be needed if you want to retain separate turn and brake signals.
Separate vs. Combined Lighting Systems
Some automobiles operate on a 3-wire system, wherein the brake signal and the turn signals travel along different wires to illuminate different lights. (Typically, these vehicles have amber turn signals.) This is referred to as a "separate lighting system". When you hook up for flat towing using this kit, your towed car's lighting system will operate in a combined fashion regardless of whether it typically has combined or separate lighting. This means that the brake and turn signals sent by your RV to your towed car will be carried on a single wire. As a result, your car's brake lights will do the flashing for the turn signals. Your vehicle will still function as designed when not hooked up to your RV.
Do You Need a Brake Light Relay?
Because this kit wires your vehicle as a combined system, a brake light relay (RM-88400 - sold separately) may be required if you use a supplemental braking system with your towing setup. A supplemental braking system depresses the brake pedal in your towed car every time you apply the brakes in your RV. So, if your towed car's brake lights illuminate when the brake pedal is pressed and the engine is off - as is the case when towing - then you need to install a relay to ensure that the lights on your towed car always act in accordance with the signals sent by your RV via the wiring harness. Without a relay, the brake signal from your towed car will override the turn signal sent by your RV when you slow down to make turns, creating a potential hazard.
RM-152 Roadmaster Universal Hy-Power Diode Wiring Kit
RM-98146-7 Roadmaster Wiring - Straight 6 to 7 - 78" Long
Installation Details
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord - RM-152-98146-7
Average Customer Rating: 4.7 out of 5 stars (250 Customer Reviews)
This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and wire your car to operate as a combined system. Includes a 7-way to 6-way straight adapter cord.by: Bill11/06/2023
The install on my Ford Maverick is clean and functional, so this is more of a customer service review... excellent customer service!
During the 4-day towing set-up install, the forecast was for freezing temps and my rig was not winterized. I called in mid panic and the motorhome was moved indoors.
A few months after using the tow set-up, a minor problem developed. I called and the CSR apologized and said, I can see how that might be frustrating, and a replacement cable (slightly longer) was sent free of charge.
by: Edward 05/16/2024
I also purchased brackets and receivers for the tow bar. Both were as advertised and are functioning very well. The staff were also very knowledgeable and helpful. Hard to find service of this kind in today’s world.
by: Phil 04/04/2024
The installation ins ructions and video were very helpful. The wiring kit worked perfectly.
by: Jason05/08/2023
Great kit. Easy to install. Connectors seem solid and wires are good.
by: James02/24/2024
The installation took some time and the instructions need to be clarified.
by: Dean 10/18/2023
Roadmaster
The Roadmaster 4 diode wiring kit has worked great for a full towing season.
Easy installation, great instructions, and added safety while towing.
The wiring kit easily integrated into the other braking and towing system components.
Thanks e-trailer!
by: Daniel05/02/2024
Easy install. Good directions. Works as described.
by: William 08/03/2023
This kit worked great. It was easy to install (etrailer offers installation videos if needed). I like this much better than a temporary set of lights on the towed vehicle. The cord and plug are also good quality.
by: Janes01/10/2024
Easy instructions and works great!!!
by: Joe H08/31/2022
See my review on the Base Plate. The electric was a little wonky but my mechanic met with the manufacturer and was able to figure it out. That said, once it was resolved, it has worked flawlessly.
by: Juan09/15/2021
2013 Subaru Forester
Works as expected. Connection feels solid enough. Have not had the opportunity to take it on a long trip yet.
One thing bit us in the butt, forcing us to cancel a trip at the last minute (when testing that our towed vehicle's turn signals, brake lights and supplemental brake system was working before driving off!): the left-turn signal prong in the male part of the connector (that plugs into the towed vehicle) was not opened enough, so no steady connection was being made because there was no contact between the prong and the walls of the female part. This had worked in a previous test. Picture included. Make sure to use a flathead screwdriver to open each prong up so full contact is made!
by: Stephen B07/14/2023
I have not been disappointed with anything I have ordered from you.
This wiring kit should do the trick for my flat towing project.
I am sorry that I couldn’t get all of the pieces from you, the transmission pump and base plate was ordered from another company.
This is my fourth camper you are helping me keep maintained and improved.
2000 Cougar 5th wheel bunkhouse,2016 Sprinter 5th wheel front living room , 2021 Nexus 31t class C and a 2016 sprinter tow behind.
by: Bruce 10/04/2023
Easy to install. Would prefer a different method for securing the diodes. I used zip ties of good quality from Ty-Rap instead of the box store cheap imitations.
by: James04/10/2022
2019 GMC Acadia
Very straight forward install, easy to follow instructions. If you do this your self be prepared, the factory light wiring isn't very long or thick it was difficult to strip the wire back far enough to double it over to get a good connection. Upon completion of the wiring, I double checked all power at both plugs, it was all good, I installed the lights, brake and turnsignals worked great, I didn't have any running lights. About 3 min later they came on and stayed on. I don't believe this has any thing to do with the kit, this vehicle has all kinds of light sensors, darkness sensors, rain sensors.. etc. I believe it just too a min or 2 for the lights to actually come on.
by: Steve05/27/2021
I chose the order by phone option. The website is well organized, but, I had gone too long without hearing another person. I have received several orders from etrailer after purchasing an RV last summer. I knew we would be Purchasing a Toad.
I don’t have any experience with towing another vehicle, so I had plenty of help in finding the right equipment for me.
The delivery times were all easily tracked and arrived in good condition. As md on time.
I had the simple tools required to install the base plate and hitch. The videos available on their site are clear and easy to understand.
I have had a great overall experience with etrailer.
by: James04/20/2022
Toyota Tacoma
I had a Toyota Tacoma that has separate blinker lights. Took a mechanic that was knowledgeable in electrical wiring. Followed the instructions and it worked perfect. Used it several times since
James J.
4/21/2023
Great. Been on several trips. No problem
by: Wayne05/17/2023
All running and signal lights work great. But no license plate light illumination.
Jenny N.
5/23/2023
You are correct in that the tow bar wiring harness part # RM-152-98146-7 will not illuminate the license plate light as the diodes are meant to keep the signals from backfeeding into your vehicle wiring. We have checked into this and having the license plate light is not mandatory when flat towing.
by: Tom F09/10/2023
2020 Jeep Wrangler
Very straightforward. I followed along to one of the videos on etrailer's site and it went very easy for me thank you etrailer!
by: Richard 02/23/2024
Works great.
by: Beemerjohn12/27/2023
Wiring was about 8 feet short to complete the task.
by: Don 04/13/2023
Honda
Kit worked well. On 2012 Honda CRV I was able to run the wire to the rear under interior panels then install diodes inside each quarter panels eliminating any wiring or component connections exposed to the weather.
by: Boyd10/03/2022
2003 Jeep TJ
1 star is simply for the fact that the straight cord is too short. Bought to use with a road master tow bar. Since I needed a drop hitch to line the tow bat up with the toad I needed about a foot more cable. Tried to make do with the one supplied. I ended up having to spend an hour in the parking lot of an rv store wiring up a new one on my first trip. You would think for [local stores] you have to pay for this they could spring for a little extra wite.
Katrina B.
10/17/2022
That is unfortunate that there was not enough wire for your application. We do carry 16 gauge bonded 4 wire, part # 16-4B-1, by the foot. You can always contact our customer service department for them to assist you in getting this wire ordered.
by: Edwin01/27/2023
It was the installation that was a issue, it works great now that I finally got it installed correctly. Had to go through 3 companies before it worked. It cost me 3 times as much, I went to a recommended installer from your site, and they hook it up but didn’t used the diodes that were provided. I took it back, and asked them to install the diodes.(the company “Fatal LLC”) charged me [XX] I kept getting feedback when the emergency lights were used, they say it’s normal for that to do that. I didn’t believe it, so I-took it to camping world, they rewired it and used a different diode don’t asked me why, but it-still didn’t work they said it would eventually work itself out, It didn’t, so I had still have the problem with the feedback when using the emergency flashers. I guess I’ll live with it. It works I guess….
by: Neal 04/08/2023
2023 Jeep Wrangler
Have not installed yet (DUO Brake system and wiring) from what I have seen I am impressed with all parts delivered.
tow bar Plate is more than substantial and the Tow bar is amazing.
by: George 03/16/2023
2011 Mini Cooper
Had a little confusion with tail light hook up. Re read instructions. Went in fine. Works great on my 2011 Mini Cooper Countryman S when coupled to Monaco Diplomat.
25
250
Show More Reviews
See what our Experts say about this Roadmaster Tow Bar Wiring
- Base Plates That Fit 2018 GMC Acadia DenaliWe do have a base plate that fits your 2018 GMC Acadia Denali, which is from Blue Ox; I did confirm with the manufacturer that the base plate does fit the Denali, and what you need is the following: - Blue Ox Base Plate Kit # BX1728 This does require the use of certain Blue Ox tow bars in order to properly connect to these base plates, and the one that will work which I recommend due to its long arms, non-binding design and included safety cables is the Blue Ox Alpha 2 Tow Bar # BX7380. You...
view full answer... - What Base Plate Can I Use with My Blue Ox Acclaim or Adventurer Towbar on My 2022 Jeep Wrangler?I have a great base plate solution for you. Since you say that your Blue Ox tow bar has a 5k capacity, I believe you are referring to either the Blue Ox Adventurer Tow Bar - Car Mount - 2" Ball # BX7322 or the Blue Ox Acclaim # BX4330. Unfortunately, we do not currently carry an etrailer baseplate that can be used with either of these models. However, we have a great Roadmaster base plate and adapter that will allow you to use your tow bars on your 2022 Jeep Wrangler. For that setup, I...
view full answer... - Parts Needed to Flat to a 2022 Jeep Gladitator RubiconFor a baseplate kit compatible with your Nighthawk tow bars is the Roadmaster Direct-Connect Base Plate Kit # RM-521453-5. These base plates are custom fit to your vehicle and will work great with your current tow bars. For a wiring harness I recommend going with the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles # RM-152-98146-7. This is a universal wiring harness that'll work fine with your Gladiator and will connect your RVs brake lights, stop lights, and turn signals. If...
view full answer... - Recommended Flat Towing Setup for a 2019 Chevrolet Colorado 2WDThe etrailer Invisible Base Plate Kit # e98966 you're looking at is only made to work with the 4WD versions, however I was able to contact Roadmaster and confirm that their Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-523182-5 is a fit for the 2WD. That said, you'd still have disconnect the drive shaft as not doing so will damage your vehicle. If you need parts to complete the flat towing setup, you're also going to need: -A tow bar like the Roadmaster Falcon 2 Tow Bar...
view full answer... - Parts Needed to Flat Tow 2013 Jeep Grand Cherokee OverlanderMost people have an opinion about which tow components are the best. In the case of your 2013 Jeep Grand Cherokee Outlander, I think that the Demco # DM9519291 Tabless Base Plate Kit would be best as it does not require drilling, and it can be matched to a Demco Tow Bar System with extras. If you have the SRT-8 option you will need to instead use the Demco # DM9519291. A Powerbuilt # ALL648544 trim popper will help get the fascia off during installation without tearing up the push pins. For...
view full answer... - Base Plate Kit that Fits 2018 Chevy EquinoxBlue Ox has a base plate kit that fits your 2018 Chevy Equinox with the part # BX1730 which I attached an install video link for to this page as well. You could use the Blue Ox Avail part # BX7420 with this and you'd have the easiest to use tow bar/base plate kit out there. For lighting you could use the # RM-152-98146-7. The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling into...
view full answer... - Will The Demco Classic Base Plate Kit Fit A Demco Exaclibar Tow Bar On A 2005 Honda Pilot?Yes, the Demco Classic Base Plate Kit # DM9517143 that you mention is compatible with all Demco tow bars to include your Decmo Excalibar. Additionally, if you're interested in a complete flat towing setup for your 2005 Honda Pilot, you're also going to need: -A braking system, like the Brake Buddy Select 3 Portable Supplemental Braking System # HM39524, -A set of tow bar wiring, like the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles # RM-152-98146-7, & -A set of safety...
view full answer... - Complete Flat Tow Setup And Tow Bar Compatibility For A 2006 Chevrolet TrailblazerTow bars like the etrailer XHD Non-Binding Tow Bar for Roadmaster Crossbar Base Plates # e64ZR are not vehicle specific, but rather base plate specific. So, to be able to use this tow bar with your 2006 Chevrolet Trailblazer you're going to need to use a XL, EZ, EZ2, and EZ4 Series base plate. I recommend checking out the: -Roadmaster Crossbar-Style Base Plate Kit # 3109-1. This base plate is confirmed to fit your 2006 Chevrolet Trailblazer, and will allow you to use the etrailer XHD...
view full answer... - Installation of Blue Ox BX2639 Base Plate Kit on 2013 Ford C-MaxWe don't endorse any particular installation facility, but I can advise you on the type of shop to seek out. Given the fact that the installation for the Blue Ox # BX2639 base plate involves removing a large part of the front of the vehicle, I'll typically recommend that you find a reputable body shop in your area and see if they'll handle this for you. They'd likely be better versed in removing the bumper cover without damaging it than a typical shop would be. In addition to the base...
view full answer... - Parts Needed to Flat Tow 2021 Jeep Cherokee Behind MotorhomeAssuming you already have the # RM-522 Roadmaster Falcon All-Terrain tow bar that you'd looked at, you'll also need a base plate kit, safety cables if you don't already have them, a wiring solution, a supplemental braking system and possibly a high/low adapter if the installed base plate has a greater than 3 inch height difference from the height of the receiver on the vehicle you'll be towing your Cherokee with. For base plates, I'd recommend the Roadmaster # RM-521452-5 which fits non-Trailhawk...
view full answer... - Mounting Location for Stay and Play DUO Operating UnitWhen I installed the Stay-IN-Play DUO # SM99251 in a 2018 Jeep Grand Cherokee I mounted the operating unit in the front of the engine bay on the core support. You can mount the operating unit anywhere that the wires and hoses can reach; it's just recommended that it mounts in the engine bay away from direct water exposure and extreme heat sources. After installing many flat tow set ups on different vehicles, the biggest piece of advice I can give you is to plan out your install. Take a...
view full answer...
- Wiring Kits Needed To Flat Tow A 2017 Chevy Equinox The Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles # RM-152-98146-7 would be a great option to transfer your motorhome's traffic signals to the tail lights of the Equinox. You can install a converter # 118158 and two additional diodes # RM-790 will be needed if you want to retain separate turn and brake signals on the Equinox. This is only connecting to the tail lights and would not need to splice into the brake light switch. You'd only need to tap into the brake light switch...
view full answer... - What Do I Need To Tow My 2018 Jeep Cherokee Behind My MotorhomeIf you want to flat tow your 2018 Jeep Cherokee, you will need to determine what type of Jeep Cherokee you have. Not all models can be flat-towed. If you have a front wheel drive model, you will need to use a tow dolly or a trailer. We do offer tow dollies and my recommendation is the Demco Kar Kaddy SS Tow Dolly with Disc Brakes - Foldable - 4,800 lbs, part # DM9713045. It comes with safety chains and a surge brake coupler. You will need a trailer, if your 2018 Jeep Cherokee has a 1-speed...
view full answer... - Complete Flat Towing Setup For A 2000 Honda CR-V With A ReadyBrute Tow BarSure thing! Along with your ReadyBrute tow bar, you're also going to need a base plate if you don't already have one. If you don't the Roadmaster Crossbar-Style Base Plate Kit # 1528-3 with the adapter # RM-032 will work great for your 2000 Honda CR-V. Next, you're going to need a braking system. I recommend taking a look at the Brake Buddy Select 3 Portable Supplemental Braking System # HM39524. I like this system because it is lightweight, portable, and easy to setup. Continuing,...
view full answer... - Complete Flat Towing Setup for a 2014 Jeep Grand CherokeeFor your 2014 Jeep Grand Cherokee you can use the Roadmaster Direct-Connect Base Plate Kit # RM-521446-5 with your Roadmaster Falcon 2 # RM-520. For everything else, you're going to need: -A wiring harness # RM-152-98146-7 with the charge line kit # RM-156-25, & -A braking system # BLU37TR.
view full answer... - Do I Have to Disconnect My Battery When Flat-Towing My 2013 Lincoln MKXYou do not need to disconnect your battery when you flat tow your 2013 Lincoln MKX. You will want to have your battery connected to run your supplemental brake system and brake lights. To keep your battery from dying on your trip you will want to use the Roadmaster Battery Charge Line Kit for Towed Vehicles item # RM-156-25. This charge line will provide just 15 amps to avoid overcharging. You are required by law to run a supplemental brake system when you are flat towing. I recommend...
view full answer... - Roadmaster Base Plate Fit on 2010 Jeep Wrangler JK With Factory BumperWe do have the correct fit for your 2010 Jeep Wrangler JK with the factory bumper, but the part you mentioned is not a fit for the stock bumper. I verified directly with Roadmaster that the correct base plate for your Jeep is the following: - Roadmaster Direct-Connect Base Plate Kit # RM-521448-5 This will be exactly what you need to add base plates to your '10 Wrangler with the factory bumper so you can flat tow it. Along with the base plates, there are a number of other parts you'll...
view full answer... - Flat Towing Equipment Recommendations For A 2021 Ford Escape Hybrid The sensors for the adaptive cruise control can be in the way when installing base plates so on models that have that feature manufacturers have had to fabricate an option that won't interfere with the sensors. You should always follow your owner's manual to ensure your specific model can be flat towed and what steps are needed before flat towing. To flat tow you'll need a tow bar, tow bar wiring kit, base plate, braking system, and safety cables. For a 2021 Ford Escape Hybrid I have the...
view full answer...
- 2021 GMC Yukon XL AT4 Flat Towing ComponentsI checked the owner's manual for your 2021 GMC Yukon XL, and yes, it is perfectly fine to flat tow. That being said, you are going to need these components: - A base plate - Tow bars - Braking system - Tow bar wiring - High-Low adapter For a base plate, we carry the Blue Ox Base Plate Kit # BLU58FR. This base plate kit is specifically made to be used on your AT4 model of your GMC Yukon XL and will work great for you. The next thing you'll need is a tow bar. Since your Yukon XL is fairly...
view full answer... - Parts Needed to Flat Tow 2007 Jeep Wrangler With Off-Road Bumper & D-RingsThere isn't a way to use the Stowmaster tow bar with the D-Ring bumper mounts, so you'll need a new tow bar to flat tow your 2007 Jeep Wrangler. The exact parts you need to flat tow your '07 Wrangler with your D-ring bumper are the following: - 3/4" Shackle Mounts: Jeep D-Ring Bumper Mounts # RM-035 or - 1" Shackle Mounts: Jeep D-Ring Bumper Mounts # RM-035-1 - Tow Bar: Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522 - Safety Chains: Roadmaster Safety Cables # RM-646 - Wiring...
view full answer... - Recommended Base Plate Kit For 2018 Jeep Wrangler JK Freedom EditionAs long as your 2018 Jeep Wrangler Oscar Mike Edition (Freedom Edition) does not have the American Expedition vehicles bumper the available base plates are the Roadmaster Direct Connect # 1444-3, Roadmaster Crossbar Style # 1444-1, and the Demco Tabless # DM34FR. If your Jeep JK does have the American Expedition vehicles bumper you will need to go with the # DM34FR. My recommendation is to go ahead and go with the Demco # DM34FR as it will work with either bumper option, and will allow...
view full answer... - What Parts do You Recommend to Tow My 2019 Chevy Colorado ZR2 Behind My RV?Since the 2019 Chevy Colorado ZR2 comes stock with 4-wheel drive, I confirmed with your owner's manual that you can definitely flat-tow your vehicle with all four wheels on the ground behind your Leprechaun. In order to do this, you need a base plate, a tow bar, a tow braking system, safety cables, and vehicle tow wiring. I recommend the following: - Blue Ox Base Plate Kit - Removable Arms # BLU93FR - Blue Ox Alpha # BX7380 (already comes with required safety cables) - Brake Buddy Select...
view full answer... - Parts Needed to Flat Tow 2020 Jeep WranglerFor a 2020 Jeep Wrangler with a standard factory bumper, the first thing you will need is the etrailer # e98948 Base Plate Kit so you can hitch to your Jeep. Add to that a tow bar. I would recommend the Roadmaster # RM-522 All Terrain – Non Binding tow bar. A non-binding tow bar will let you easily disconnect your tow bar even if your coach and towed vehicle is not on level ground or at a difficult angle. The tow bar is the one point in flat towing that gets the most stress and wear....
view full answer... - Flat Towing Components Needed For A 2021 Jeep WranglerFor your 2021 Jeep Wrangler Sahara, you'll need: -A Base plate - A set of tow bars - A braking system - Tow bar wiring - A high-low adapter For a base plate I recommend the Romadmaster Direct-Connect Base Plate # RM-521453-5. This base plate kit is custom made to fit your vehicle, has a simple no-drill installation, and provide a clean look when not in use. Next is a set of tow bars. I recommend the Roadmaster Falcon All-Terrain # RM-522. This tow bar will directly connect to your...
view full answer...
Do you have a question about this Tow Bar Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Randy B
Test Fit:
Brent H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Bradley B
Test Fit:
John A
Expert Research:
Mike L
Expert Research:
Jameson C
Video by:
Zack K
Video by:
Kathleen M
Video by:
Shane H
Video by:
Michael B
Video by:
Jacob H
Video by:
Aidan B
Video by:
Thomas T
Video by:
Rick G
Edited by:
Lindsey S
Installed by:
Jeff D
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Video Edited:
Jonathan Y
Video Edited:
John S
Written by:
Shelly K
Updated by:
Hannah L
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
James
3/3/2023
no issues after 10K miles super happy with this product