Magnetic LED Tow Light Kit - Weatherproof - Red Lens - 20' Wiring Harness - Qty 2

See what our Experts say about this Optronics Tow Bar Wiring

• Parts Needed to Flat Tow 1997 Jeep Wangler TJ
  A braking system like your Ready Brake and a tow bar like your Ready Brute are two of the items needed for safe and legal flat towing. The other components include safety cables, a wiring/lighting kit, a high/low hitch adapter to keep the tow bar level when it is connected and either base plates on the towed vehicle or a tow-rated aftermarket bumper. Base plates and adapters for the 1997 TJ appear on the linked page and the right one depends on the bumper setup. You can use the drop-down...
  view full answer...
• Will Optronics LED Magnetic Tow Lights Protect Against Scratching 2018 Ford Fiesta SE Paint?
  The Optronics Magnetic LED Tow Light Kit - Weatherproof - Red Lens - 20' Wiring Harness - Qty 2 # TLL21RK has a protective label pad on the bottom to keep from scratching paint. You can see this at the 2 minute mark of the attached review video. I do recommend wiping down the vehicle with a microfiber cloth before putting the lights on simply to remove any dust or debris that could be abrasive between the scratch free label and the paint for added security.
  view full answer...
• Flat Tow 2021 Jeep Wrangler Unlimited Demco Base Plate Sterling Tow Bar
  The Demco Tabless Base Plate Kit # DM9519336 is the correct base plate for your 2021 Jeep Wrangler Unlimited. This kit is designed to work with the Roamaster Sterling Tow Bars #RM-576 without any adapters. For the Blue Ox Patriot # BLU37TR to work with your Wrangler you will need to add a couple parts. The first is a 12 Volt Outlet Kit # RM-9332 for constant power when the ignition is switched off. Second is a Battery Charge Line Kit # RM-156-25, this will keep your battery charged while...
  view full answer...
• Parts Needed To Flat-Tow 1982 Jeep CJ-5 With Roadmaster Falcon Tow Bar
  We do not have a custom base plate kit that is designed for your 1982 Jeep, but I do have a solution that will work for you. First you will need to install the Universal Blue Ox Bolt-On Base Plate Bracket Kit, part # BX88230. This attaches to the bumper on your Jeep. Since the brackets must be mounted to a flat metal surface you will most likely need to modify and or reinforce your bumper. You will then need the Roadmaster Tow Bar to Blue Ox Brackets Adapter, part # RM-031. You can...
  view full answer...
• Recommended Parts to Flat Tow 2011 Hyundai Santa Fe Behind Class C Sunseeker Motorhome
  I am happy to recommend the items you'll need to safely flat tow your 2011 Hyundai Santa Fe with 2.4L engine and manual transmission behind your 2010 Sunseeker Class C motorhome. If you have a different version of the car that cannot be flat towed you might instead be able to use a tow dolly. First you'll need base plates on the car. The Blue Ox kit # BX2719 is currently the only one available that will fit. With it you can use their reliable Nighthawk tow bar # RM-677 that stores on...
  view full answer...
• Recommended Blue Ox Base Plates and Tow Bar for Flat-Towing 2005 Jeep Wrangler
  First, for base plates you can use the linked page to see all options for your 2005 Jeep Wrangler. It is generally easiest to stay with one brand for both base plates and tow bars (to avoid the need for adapters) so if you have either a u-channel or double tube bumper you'll use Blue Ox base plate kit # BX1120. You can then use the Blue Ox Alpha tow bar # BX7380 which includes the required safety cables. Other items needed to flat tow include a wiring/lighting kit and a supplementary...
  view full answer...
• Recommendation for Adding Temporary Brake Lights to Airstream Trailer
  For temporary brake lights that can mount to your Airstream trailer, I recommend looking at the Optronics Magnetic Tow Lights # TLL21RK. These are magnetic red lights that will act as running lights, brake lights and turn signals. The magnetic bases will hold them firmly to any metal surface. This kit includes a 20 foot wiring harness with a 4-Way flat plug. To extend the wiring, I recommend cutting and splicing in the appropriate length for your trailer with Bonded 4 Wire # 16-4B-1....
  view full answer...
• Parts Needed to Flat Tow a 2013 Ford Fusion SE Hybrid Without Adaptive Cruise Control
  Flat towing a vehicle requires 5 basic components: tow bar, safety cables, wiring harness, base plates and a supplemental braking system. If mixing brands of base plates and tow bars then an adapter may also be needed. We offer RoadMaster Base Plate to Blue Ox and Demco Tow Bars Adapter part # RM-033 that will require the Roadmaster Tow Bar Quick Disconnect Kit # RM-201. With this adapter and disconnect kit you can use Roadmaster base plates # RM-524434-4 along with your Demco Kar Bar...
  view full answer...
• Parts Needed to Flat Tow Behind Motor Home
  There are several items needed to flat tow your vehicle. Flat towing is easiest with a vehicle with manual transmission. Additionally, as a general rule, the tow vehicle should weigh twice as much as your towed vehicle. You will want a tow bar for the vehicle you will be pulling. Base plates are vehicle specific. To give you an idea, if you will be flat towing a 2005 Subaru Forester, I recommend the Blue Ox Base Plate Kit # BX3612. This base plate has removable arms so that the base plate...
  view full answer...
• Will Blue Ox Tow Bars work with Roadmaster Baseplates for a 2015 Nissan Versa Note Canadian Version
  The Roadmaster base plates # RM-52357-4A and # RM-52357-5 are currently the only base plates that will fit your 2015 Nissan Versa Note Canadian version. The U.S. and Canadian versions are made the same. The # RM-52357-5 will sit further back than the # RM-52357-4A, but it is not compatible with a tow bar adapter. If you plan on using a Blue Ox tow bar like the Avail # BX7420, then you will need a Roadmaster base plate to Blue Ox adapter # RM-032 along with the Roadmaster base plates #...
  view full answer...
• Base Plates for 2006 Ford Escape Hybrid 4x4 to Use with Roadmaster Falcon 2 Tow Bar # RM-520
  The recommended Roadmaster base plate kit for your 2006 Ford Escape Hybrid is their XL Type which features removable draw bars, part # 4406-1. The included draw bars are held in place with hitch pins and when removed the vehicle's original appearance will be largely maintained. These base plates will require some trimming of the front fascia components for installation. The other draw bars from the base plates from your last vehicle, part # RM-52357-4A, use a different attachment method...
  view full answer...
• Parts Needed to Flat Tow a 2012 Jeep Wrangler Sport Behind Winnebago 35U Gas Coach
  Flat towing requires 5 basic components: tow bar, safety cables, a wiring/lighting kit and base plates and a supplementary braking system for the towed vehicle. Since you have a Roadmaster tow bar I suggest staying with their base plates since this will avoid the hassle and expense of adapters which can be required to mate different brands' parts. You can use the link provided to see all Roadmaster base plates and the Select Vehicle Style drop-down menu at the top of the page will allow...
  view full answer...
• Parts Needed to Flat Tow 2003 Toyota Tacoma 4WD Manual Behind Class C Motorhome
  Flat towing a vehicle behind a motorhome, safely and legally, requires a number of components which include the tow bar, safety cables, a wiring/lighting kit of one type or another, base plates and a braking system for the towed car, and often also a high/low hitch adapter and wiring extension. All of these items are covered in the linked article on flat towing and additional articles on braking systems and high/low adapters are linked too. I also suggest you check your Tacoma owner's manual...
  view full answer...
• Flat Towing 2001 Ford Mustang Convertible or 2005 Saturn Ion with Manual Transmissions
  For the 2001 Ford Mustang convertible with manual transmission we do offer flat towing base plate options. These are fits for all versions except the Cobra SVT. The set I recommend is the Roadmaster # 466-1 since this base plate has removable arms that will spare you a lot of bumps to the shins. Flat towing also requires a tow bar, safety cables, a wiring/lighting kit and in most states a supplementary braking system. You will find great detailed information about each of these items...
  view full answer...
• Base Plates and Lighting Needed to Flat-Tow 2013 Chevrolet Captiva Sport LTZ
  We offer base plates for your 2013 Chevrolet Captiva Sport LTZ from both Roadmaster and Blue Ox, but since you have a Roadmaster tow bar you'll be better off with Roadmaster base plate # 3151-1A as long as your Captiva Sport does not have the brush guard. If you do have the brush guard you can instead use Blue Ox base plate # BX3332. Both will require some trimming of the spoiler, air dam, grill or plastic fascia. If you use the Blue Ox base plates you'll also need an adapter to mate them...
  view full answer...
• Recommended Parts Needed To Flat-Tow 2008 Saturn Outlook
  I did some research in the owner's manual for your 2008 Outlook that it can be flat-towed. On page 4-28 of the owner's manual it explains the steps you need to take when preparing your vehicle for flat-towing. I will make the recommendations for the parts you need to tow your Saturn. There are several items you need when you flat-tow a vehicle. First I recommend the Roadmaster EZ Base Plate Kit, part # 523149-1. For a tow bar I recommend the Roadmaster Falcon 2 Tow Bar, part # RM-520....
  view full answer...
• Components Needed To Flat-Tow 1993 Mazda Miata Behind Motorhome
  You sure can flat-tow your 1993 Miata behind your motorhome. Since we only offer Roadmaster base plates for your vehicle you have a couple options. I recommend the Roadmaster XL Base Plate Kit, part # 711-4. If you decide you want to go with the Blue Ox Alpha Tow Bar, part # BX7380, you will need the RoadMaster Base Plate to Blue Ox Tow Bars Adapter, part # RM-033. Then you will need the Roadmaster Tow Bar Quick Disconnect Kit, part # RM-201. If you decide this is too many components...
  view full answer...
• Do Vehicle Taillights Need to Function If Vehicle is Towed with Tow Dolly
  Generally, you don't need additional lighting when using a tow dolly that already has lights. However, it's not a bad idea to check with the local laws in the states you'll be traveling in. If you do need to have lights on the vehicle you could use the magnetic LED tow light kit part # TLL21RK and to add a 4-way to your tow vehicle's wiring you would want the part # 18252 which would wire into the current trailer wiring.
  view full answer...
• Will Blue Ox Portable Braking System work on 2005 Toyota Corolla
  Thank you for your recent order. Yes, the Blue Ox Portable Braking System, # BLU37TR, will work on your 2005 Toyota Corolla. This system activates the brakes in your towed vehicle at the same time and with the same intensity as the brakes in your RV. In order for the brake lights to activate when you push the brakes on the RV, you will need to install a wiring kit on the Corolla. We offer three different installation options. The Roadmaster Separate Lighting Kit, # 154-792-118158, connects...
  view full answer...
• Is a Base Plate Kit Available Without the Removable Arms for a 2001 Chevrolet Tracker
  All of the base plate kits we sell come with the removable arms. Base plate kits are made with a specific set of removable arms at the factory, so no set of arms is completely identical. The frame bracket mounts of the base plate kits are not available separately from the removable arms. With that being said, the Roadmaster XL Base Plate Kit, # 1012-1, is compatible with your 2001 Chevrolet Tracker and it will come with a set of removable arms that were designed to fit that kit. Keep...
  view full answer...
• Parts Needed to Flat Tow 1998 Chevrolet Tracker Behind 2005 Toyota Tacoma PreRunner
  Flat-towing a vehicle requires a number of components in addition to wiring/lighting for the towed vehicle. The linked article covers each of the required components, which include a tow bar, base plates for the towed vehicle, safety cables, wiring/lighting as well as a supplementary braking system for the towed vehicle. Laws vary by state but most require all of the above items to legally flat-tow. Not all vehicles, and not all versions of certain vehicles can be flat-towed. You will...
  view full answer...
• Parts Needed to Flat Tow a 1996 Jeep Grand Cherokee
  Since you are only going to tow the vehicle once I recommend renting a vehicle trailer at the same time you rent the truck. I can advise you of all the parts you will need to flat tow the vehicle but honestly since it is a one time deal, the best option for you is to just tow it on a trailer. To flat tow the vehicle you would first check the owners manual to make sure your model can be flat towed and to check on any special requirements. You would have to have base plates, a tow bar, safety...
  view full answer...
• Parts Needed to Flat Tow a 2011 Honda CR-V
  It looks like you have most of the parts to flat tow your 2011 Honda CR-V, but there are two more items that you will need. First you will need a light kit. There are different options available for the CR-V. If you will not be towing very frequently and want something that is easy to install, then I recommend looking at a magnetic light kit like the Magnetic LED Tow Lights, # TLL21RK. These lights attach to the vehicle with the magnetic base and have a 4-pole flat connector to connect...
  view full answer...
• Need Replacement Parts for Roadmaster Even Brake 9400 Supplementary Braking System # RM-9400
  Flat-towing a vehicle behind a motor home requires several components. Those are a motor home-mount tow bar, a compatible vehicle base plate kit, safety cables, tow bar wiring (to operate the tail lights on the toad) and the supplementary braking system, such as the Roadmaster Even Brake 9400 that you have. The linked article covers each of these in detail. The Roadmaster Second Vehicle Kit you reference, part # RM-98400, includes a complete breakaway kit (wiring harness, cable and switch),...
  view full answer...

Do you have a question about this Tow Bar Wiring?