bing tracking image
  1. Accessories and Parts
  2. Buyers Products
  3. Vehicle Lights
  4. Emergency Supplies
  5. Mounting Brackets
Buyers Products Magnetic Mounting Plate - Self-Adhesive - 3-1/2" Square - Qty 4

Buyers Products Magnetic Mounting Plate - Self-Adhesive - 3-1/2" Square - Qty 4

Item # 3378895404
lowest price pledge
Retail:$50.70
Our Price: $29.54
You Save: 42%
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 1.02 lbs
Quantity: 
Buyers Products Accessories and Parts - 3378895404
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Call 800-298-1624 to order Buyers Products accessories and parts part number 3378895404 or order online at etrailer.com. Free expert support on all Buyers Products products. Guaranteed Lowest Price and Fastest Shipping for Buyers Products Magnetic Mounting Plate - Self-Adhesive - 3-1/2" Square - Qty 4. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (17)
  • Q & A (0)
  • Photos
  • Why etrailer?

Buyers Products Accessories and Parts - 3378895404

  • Vehicle Lights
  • Emergency Supplies
  • Mounting Brackets
  • Buyers Products


  • Buyers Products self adhesive magnetic mount pad for aluminum cabs
  • Sticks to your cab roof to enable the use magnetic mounts on aluminum cab trucks
  • Black powder-coated carbon steel plates are magnetic and are backed with strong and sticky 3M tape
  • Stays on your truck cab even through inclement weather
  • Dimensions: 3-1/2" wide x 3-1/2" tall
  • Quantity: 4 mounting pads

8895404 Buyers Products 3.5 Inch Self-Adhesive Magnetic Mounting Plate, 4 Pk






Customer Reviews

Buyers Products Magnetic Mounting Plate - Self-Adhesive - 3-1/2" Square - Qty 4 - 3378895404

Average Customer Rating:  4.8 out of 5 stars   (17 Customer Reviews)


- 3378895404
by:

I have them mounted on top of my 2017 F-350 for a year now and have had no problems so far. My magnetic mount CB & Ham Radio antennas have hit low hanging tree branches and have not had any problems at all. Great product. Would buy again.



- 3378895404
by:

They look like they should work... are those small strips of double sided sticky tape all that holds them to the truck? They hold at freeway speeds?


Comments
Yes, thee adhesive backing is a strong 3M tape that will hold to the truck. They can withstand freeway speeds.
-- Etrailer Expert Jenny N - 11/21/2021


- 3378895404
by:

Great for mounting a yellow light for snow plowing.



- 3378895404
by:

Very happy with the products and the quick delivery.Needed this light bar for plowing and with an aluminum body Ford I needed the magnets to mount for the magnetic light bar. Exactly what I needed.



- 3378895404
by:

Holds light on perfectly



- 3378895404
by:

Good idea. Two worked extremely well. Two didn’t adhere well to plastic.



- 3378895404
by:

Excellent service Delivery in 2 days a wesome



- 3378895404
by:

Item as described. Fast shipping. TY



- 3378895404
by:

Great product, wish I had bought two



- 3378895404
by:

They work on 2020 F350



- 3378895404
by:

Very affordable. Worked exactly as stated. Would definitely order again if needed.



- 3378895404
by:

Easy ordering, fast delivery, product was easy to use and does exactly what was needed, highly recommend.



- 3378895404
by:



- 3378895404
by:



- 3378895404
by:



- 3378895404
by:



- 3378895404
by:


17
17

Ask the Experts about this Buyers Products Accessories and Parts



  • Compatibility of Magnetic Mounting Plates with Magnetic Sign on Aluminum Trailer
    Yes. The Buyers Products Magnetic Mounting Plate - Self-Adhesive - 3-1/2" Square - Qty 4 # 3378895404 are designed for use on aluminum cab trucks but can also be used on aluminum sided trailer. This will work very well for your magnetic sign.
    view full answer...
  • Will Buyers Products Magnetic Mounting Plate # 3378895404 Attach to Jeep Plastic Bumper
    Yes, the adhesive of the Buyers Products Magnetic Mounting Plate # 3378895404 is strong enough to attach securely to a Jeep plastic bumper. Just be sure to clean the bumper well.
    view full answer...
  • How to Attach Magnetic Emergency Light to Aluminum Body Truck
    I have a perfect solution for you! In order to attach the magnetic Blazer Amber Warning Light Bar # C4850AW to your aluminum body Ford F-250 I recommend using the Buyers Products Magnetic Mounting Plates # 3378895404. These self adhesive magnetic mount pads are specifically designed for applications like yours. They will stick to the aluminum cab using strong 3M tape and provide you with a magnetic surface to which you can mount any magnetic light. We do not have any suction cup style...
    view full answer...
  • Are Buyers Products Magnetic Mounting Plates Easy To Remove and Do They Damage Paint on Vehicle
    Since your truck body is aluminum in order to install the Magnetic Blazer Amber lights part # C4850AW you need the Buyers Products magnetic mounting plates part # 3378895404. The steel plates part # 3378895404 are backed with 3M tape which from my research does not affect your paint if you use Goo Gone or 3M General Purpose Adhesive remover to dissolve the sticky residue before trying to remove it. They are one time application so once you have removed them you need more double sided tape...
    view full answer...
  • Dimensions of Buyers Products Magnetic Mounting Plates and Will They Fly Off In Wind
    The Buyers Products Magnetic Mounting Plates # 3378895404 that you referenced measure exactly 3-1/2" x 3-1/2". These feature strong 3M tape strips on the backside that securely attach to the aluminum body on your vehicle. The magnetic top would then be used to mount magnetic lights like the Blazer # C4850AW you were looking at. This will provide a really secure connection that will not fly off in the wind during travel. Both the self-adhesive squares and the magnetic light are designed...
    view full answer...
    Image 1 for
  • Do Buyers Products Magnetic Mounting Plates Damage Paint on Vehicle and Can I Go Through A Car Wash
    The Buyers Products magnetic mounting plates part # 3378895404 are backed with 3M tape which is designed to not affect your paint. I do recommend when you go to remove the magnetic plates to use Goo Gone or 3M General Purpose Adhesive remover to dissolve the sticky residue before trying to remove the plates. Going through car washes may rip them off if you go through one the first couple of days after installation but will be fine after that. I do recommend to remove the light bar from...
    view full answer...
  • Magnet Mount For Wilson 5000 CB Antenna On Aluminum Body Truck
    I have no doubt that the Buyers Products Magnetic Mounting Plate part # 3378895404 will stay attached to the aluminum body of the 2017 F-350 at highway speeds, however the plates are designed to be used for magnetic lights which have a much lower profile than your Larsen 150 Ham Radio antenna which is very tall with a narrow base. At highway speeds the Larsen antenna will most likely not be able to withstand the wind pressure. I took a look at your Wilson 5000 CB Antenna and the base is...
    view full answer...
  • Does The 3M Tape On Buyers Products Magnetic Mounting Plate Damage Car Paint?
    The Buyers Products Magnetic Mounting Plate - Self-Adhesive - 3-1/2" Square # 3378895404 uses 3M adhesive tape which is used quite often in the automotive industry and it will not hurt the paint on your roof. Just make sure that you clean the surface prior to installation, and also use some sort of adhesive remover such as Goo-Gone when removing the plates after your vehicles no longer need them. These plates are designed to be used with various magnetic-mounted lights such as Blazer Amber...
    view full answer...
  • Can the Buyers Products Magnetic Mounting Plate Be Used From the Inside with a Fiberglass Roof
    I contacted the manufacturer about if the Buyers Products Magnetic Mounting Plate # 3378895404 will work through the fiberglass roof on your 2000 Jeep TJ, they were able to inform me that the fiberglass will weaken the magnet too much to be safe for use through the roof from the inside. You will still be able to use the magnets but they will need to be used on the outside of the roof. The magnets are attached using 3M tape, so they are not a permanent attachment and can be removed if you...
    view full answer...
  • Tail Lights Covered By Bike Rack Solution
    The lights on the Demco Tow Lights w/ Wiring Harness # DMKKLB do not adjust from the vertical 180° position. The feet on # DMKKLB do adjust positions left and right for different angles. I recommend using the Magnetic LED Tow Light Kit # TLL21RK to alleviate your blocked tail lights. The harness plugs into your 4 way flat trailer harness and uses magnetism to secure to the back of your vehicle. If you have nothing for the magnets to stick too, you can use # 3378895404 to fix that. Please...
    view full answer...
  • Best Bracket and Light To Add To Hollywood Bike Rack
    I recommend to use the 6-1/2" oval bracket part # BK70BB with the lights of the LED light kit part # 98174LED because the 6" oval will be a tight fit. They will fit perfectly into the 6-1/2" oval bracket with the grommets on the light. I have attached a photo for your reference. The brackets will require self tapping screws or zip ties to hold them on. Another option is to use the Magnetic LED lights part # TLL21RK on the vehicle itself instead of trying to attach them to the bike rack....
    view full answer...
    Image 1 for Image 2 for
  • Solution for Blocked Tail Lights When Using Thule EasyFold XT Bike Rack
    I do have a solution for you, but Thule doesn't offer a light kit specifically designed for your EasyFold XT bike rack, # TH903202. One option is to use the LED Light Kit # 98174LED along with two mounting brackets # BK70BB . This would most likely require permanent modifications to your EasyFold though, since you'd need to drill holes to mount the lights on the rack itself. You could try to use zip ties to attach the mounting brackets to your bike rack, but it wouldn't be the most secure. A...
    view full answer...
    Image 1 for Image 2 for
  • How To Add Taillights to the Thule EasyFold Bike Rack
    There a few options to add tail lights to the Thule EasyFold XT 2 E-Bike Platform Rack part # TH903202. You could use the brackets part # BK70BB and LED light kit part # 98174LED which is designed to add lights to cargo carriers. Since the rack is plastic the only way to really allow these to mount is to use zip ties. This would be the only semi permanent solution to adding the brackets to the bottom of the bike rack. The easiest and less invasive way to add lights is to simply use the...
    view full answer...
    Image 1 for

Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Wilson B
Updated by:
Wilson B
Employee Daron K
Edited by:
Daron K
Employee Brian T
Written by:
Brian T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-1624