Magnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness

See what our Experts say about this Peterson Tow Bar Wiring

• Where can I attach the Peterson Light Kit
  I went to the warehouse and pulled the Peterson Tow Light Kit, # PE26UR. It can be placed anywhere that there is metal. It attaches securely with a strong magnet. You can place it anywhere so that it can be seen from the back. A good place is the top of the towed vehicle. This kit will keep the tow vehicle and toad wiring separate, and provide stop turn and tail lights for towing your VW.
  view full answer...
• Parts Needed to Flat Tow 2017 Honda HR-V Behind Class C Motorhome
  We can help you equip your 2017 Honda HRV for flat towing behind your motorhome, and there are a number of different parts you will need in order to do this. For base plates I recommend the Roadmaster EZ5 kit # RM-521570-5 that you referenced. This bracket will accommodate any Roadmaster motorhome-mounted tow bar. I recommend their Falcon 2 tow bar # RM-520. For safety cables use # RM-643. For a lighting kit I suggest an inexpensive magnetic light kit like # PE26UR or # TL21RK; these...
  view full answer...
• Recommended Tail Light Wiring For Flat-Towed 2018 Jeep Cherokee With Bike Rack Blocking Taillights
  The 4-pin on the rear of your 2018 Jeep Cherokee Overland wouldn't have power running to it unless it the vehicle was running so the simplest option would be to just bypass the wiring you installed when you plan on flat-towing your vehicle and hauling your bikes and instead using some magnetic lights instead like the Magnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness # PE26UR or the Custer Lite-It Magnetic Tow Lights # LIW-AGKIT-SG if you would like a wireless connection.
  view full answer...
• Installing MaxxTow # MT70097 Magnetic Mount Tow Lights Permanently on Vehicle
  The Peterson # PE26UR Magnetic Tow Lights could be modified by doing some cutting and splicing to work as you describe. You would attach the connector of the wiring harness at the front of the vehicle and run the wiring under the vehicle. Following the frame member or an existing wiring harness works best. Run the wires to the rear of the vehicle, being sure to avoid any suspension and steering components that might move or anything hot like the exhaust system. Under the vehicle at the...
  view full answer...
  
• Parts Needed to Flat Tow a 2011 Nissan Versa
  A complete flat towing setup typically consists of base plates, a tow bar compatible with your base plates, safety cables, tow bar wiring, supplemental braking and a high/low adapter; it sounds like you already have a supplemental braking system but we can help you locate the other parts. Typically your base plates will dictate your tow bar, and you have 2 options for base plates in the Roadmaster # 52347-1 and the Blue Ox # BX1845. Both provide you with removable arms so that your vehicle...
  view full answer...
• Can a 2015 Honda Fit Sport Automatic Be Flat-Towed With 4 Wheels on the Ground
  According to one of our primary resources for flat-towing information, Roadmaster Engineering, the 2015 Honda Fit is flat towable. However, your new Fit owner's manual is the best place to check for any cautions or special requirements for flat-towing your exact version of the 2015 Fit Sport. We offer Roadmaster base plates for the manual transmission version of the 2015 Honda Fit Sport. That is their EZ4 Series Base Plate # RM-521569-4. Please refer to the linked instructions at right....
  view full answer...
• Recommended Flat Tow Equipment for a 2002 Saturn SC2
  You will need to get a completely new tow bar if you're wanting to install a custom base plate kit on your 2002 Saturn SC2. The Curt Tow Bar # C19745 that you have is designed to be connected to your vehicle using the universal brackets that come with the tow bar and the tow bar isn't compatible with anything else. I recommend going with the Roadmaster EZ Base Plate Kit # 52181-1 and pairing it with the Roadmaster StowMaster Tow Bar # RM-501 which connects to the motorhome using a coupler...
  view full answer...
• Will Magnetic Tow Lights Work With Chrysler Town And Country Minivan
  The Peterson Magnetic Tow Lights, part # PE26UR are led lights and have a 20 ft long cord that has a 4-way trailer connector. These lights are designed to work with any towed vehicle, and you use the magnetic bases to attach these lights.
  view full answer...
• What Wiring Components do You Recommend for Towing with My 2017 Porsche Mecan?
  If you are just looking to mount accessories like a bike rack or cargo carrier on a hitch receiver installed on your 2017 Porsche Mecan, you do not need any additional wiring unless you are planning to install a tail light kit like the Peterson Magnetic Tow Lights- 4-Way Flat Connector # PE26UR. If you are planning to use this type of tail light kit or are planning to tow a light utility trailer, you will need the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector...
  view full answer...
• Recommended Lights For Signaling With Bikes Blocking Tail Lights On A 2014 Kia Sorento
  Since you're trying to display your braking and turn signals utilizing your 4-pole connector your best bet is to use a simple magnetic tow light like the Peterson Magnetic Tow Lights # PE26UR. Since your 2014 Kia Sorento is a crossover SUV the magnetic lights will be high enough above the bikes to display. These are a very simple install; the lights have magnets to stick to your vehicle's roof and come with a 4-pole connector cable to make installation take less than a minute. We also carry...
  view full answer...
• Lighting Options for Towing 2015 Honda Civic Si Behind Motorhome
  Neither Roadmaster nor Blue Ox offer a base plate kit for the 2015 Civic. Both companies tell me that the vehicle isn't flat towable, in which case you'd want to use a tow dolly like part # RM-2050-1. The tow dolly has taillights on it, for extra visibility the # RM-2120 tow lamp kit would work well for you.
  view full answer...
• Parts Needed to Flat Tow a 2007 Honda Fit Behind a Motor Home with an Aventa Tow Bar
  In order to determine if your 2007 Honda Fit can be flat towed behind a motor home you will want to consult the vehicle owners manual. Since you have an automatic transmission you will need to use base plates # 521558-1. Blue Ox does not have a base plate kit for the automatic transmission models. You can still use your Aventa tow bar by using adapter # BX88178. If you need safety cables, use # RM-643. For a lighting solution I recommend kit # 154-792-118158. Most states now require...
  view full answer...
• Magnetic Tow Lights Stay on When Connected to 4-Pole Connector on Tow Vehicle
  It sounds like you have already been doing some troubleshooting which helps to narrow down the possibilities for us. What I recommend doing is testing both sets of lights with another vehicle. Even though it is unlikely that 2 sets of magnetic lights would be malfunctioning the exact same way at the same time, it is not impossible. You can verify that the lights are working properly by performing this test. If they need to be replaced, we have the Peterson Magnetic Tow Lights # PE26UR...
  view full answer...
• Can a 2013 Honda Fit be Flat Towed Behind a Motorhome
  I have a copy of the 2013 Honda Fit Owners Manual that I found online, and it states that both manual and automatic transmission equipped Fit models can indeed be towed behind a motorhome IF the specific procedures shown are followed. You can find this information by checking your manual. Be sure to read the instructions carefully and completely, as they're pretty specific and if they aren't followed to the letter, you can damage the drivetrain of your Fit. I looked through several online...
  view full answer...
• Magnetic Towing Lights With 4-Way to Replace Damaged Set
  We do carry magnetic towing lights that connect with a 4-way like the ones that were damaged with the lost cap, but no replacement lenses. So, the best option is going to replace yours with a similar set from Optronics or Tow Ready. - Optronics Magnetic Tow Lights # TL21RK - Tow Ready Magnetic Tow Lights # PE26UR I have added links below to video reviews of both options for you to take a look at.
  view full answer...
• Will Magnetic Tow Lights Work With a Supplemental Braking System
  In order to use magnetic tow lights like the Peterson Magnetic Tow Lights part # PE26UR on a towed vehicle you must use a portable braking system like the Blue Ox Patriot Portable Braking System part # BLU37TR. If you want to use a permanent braking system like the Roadmaster InvisiBrake Supplemental Braking System part # RM-8700 you'll also need a direct wire-line harness like the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267.
  view full answer...
• Parts Needed to Flat Tow a 2007 Honda Fit Behind a Motor Home
  First, be sure to consult the Fit owners manual to determine if and how your Fit should be towed. Yes there are base plates for the 2007 Honda Fit from Blue Ox but only if it is a manual transmission. You would use # BX2252. For a compatible tow bar I recommend the Avail # BX7420. It also comes with safety cables. For a lighting solution I recommend the Roadmaster wiring harness # 154-792-118158. Most states now require a supplemental baring system on the vehicle being flat towed. I...
  view full answer...
• Magnetic Tow Light Kit that Uses 7-Way Connection to Tow Vehicle
  For a magnetic tow light kit that would use a 7-way you'd want the Peterson kit part # PE26UR with the 7-way adapter # HM47365 which you'd plug into the 4-way of the light kit which would then plug into the 7-way of your tow vehicle.
  view full answer...
• Most Cost-Effective Way to Flat or Dinghy Tow a 2020 Ram 1500
  I'm glad you know that there is going to be a certain cost associated with flat towing (also called dinghy towing) your 2020 Ram 1500, but there are certain ways you can save money while still being both safe and comfortable. There are a number of parts you'll need, starting with base plates, the Roadmaster Direct-Connect Base Plate Kit # RM-522203-5 (fits all but Rebel models of '20 Ram 1500), which also needs a compatible tow bar, with the Roadmaster Falcon 2 Tow Bar # RM-520 being...
  view full answer...
• Magnetic Tow Bar Lighting Recommendation for 2016 Ford F-150
  The tow bar lighting kit part # PE26UR that you referenced is a universal kit that can basically fit any vehicle, and it attaches to any metal surface with a magnet. You could also take a look at the part # TL21RK which is also a universal kit that could easily attach to the bumper or bed rails or any magnetic surface.
  view full answer...
• Is Peterson Magnetic Tow Lights PE26UR Compatible with 2015 Nissan Frontier Pickup
  It certainly will. The Peterson # PE26UR will work perfectly for you. I'll link you to a product demonstration video featuring the lamps in action.
  view full answer...
• Magnet Strength Of Peterson Tow Bar Wiring 18148 Lights
  The Peterson Magnetic Tow Lights - 4-Way Flat Connectors # PE26UR have a strong magnet. They don't have any weight rating or capacity rating. They have been tested at highway speeds with various weather conditions to stay firmly in place on your towed vehicle's exterior. You can remove them by hand, and they take a little strength to remove, but you do have to be purposeful for them to come loose. I've attached an article on these style magnetic lights to assist.
  view full answer...
• Lighting Functions and Extension Cable for the Peterson Tow Light Kit
  The Magnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness Item # PE26UR, provides stop, turn and taillight functions for flat towing. If you need an extension There are several options depending on the length that you need. If 48 inches would be long enough you can use the 48-inch Car and Trailer End Loop, # 18044. If 60 inches is needed use the 60-inch Car and Trailer End Loop, # 18045. If you need a custom length wire you could purchase a 4-Pole Trailer End Connector,...
  view full answer...
• Can Kia Soul with Manual Transmission be Flat Towed
  Some model years of the Kia Soul with manual transmission can be safely flat towed with 4 wheels down, but you will want to check your owner's manual to confirm that your particular model year is capable of being flat towed. This should appear in your manual under the heading "recreational towing". This section of your manual will tell you if there are any required preparation steps to ready your Soul for flat towing. Safe and legal flat towing requires a number of components: tow bar,...
  view full answer...

Do you have a question about this Tow Bar Wiring?