Can a 2013 Honda Fit be Flat Towed Behind a Motorhome
Updated 09/06/2016 | Published 09/03/2016 >
Products Featured in This Question
Question:
I am interested in knowing if I can flat tow my 2013 Honda Fit Manuel transmission.
asked by: Sally M
Expert Reply:
I have a copy of the 2013 Honda Fit Owners Manual that I found online, and it states that both manual and automatic transmission equipped Fit models can indeed be towed behind a motorhome IF the specific procedures shown are followed. You can find this information by checking your manual. Be sure to read the instructions carefully and completely, as they're pretty specific and if they aren't followed to the letter, you can damage the drivetrain of your Fit.
I looked through several online forums, and saw several references stating that the 2013 Fit can be flat towed.
To flat tow a vehicle, you'll need base plates installed on the vehicle, a tow bar, safety cables, a lighting solution so the taillights on the Fit operate in tandem with those of the RV, a supplemental braking system and possibly a high/low adapter and a electrical umbilical to connect the RV and the Fit.
I'd recommend the Roadmaster # 521190-1 base plates and their Falcon 2 Tow Bar, part # RM-520. The Falcon 2 tow bar is easy to use, and features auto locking and centering arms which makes attaching the vehicle to the RV easy, even if the vehicle isn't perfectly lined up with the RV.
For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.
Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.
I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.
Product Page this Question was Asked From
Universal Magnetic Tow Lights - Red LEDs - 20' Wiring Harness with 4-Way Flat Trailer Connector
- Flat Tow Wiring Harness
- Bypasses Vehicle Wiring
- Removable Tail Light Kit
- Universal Fit
- 4 Flat
- Peterson
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Can 4-Flat Plug Be Cut Off Of Blue Ox Plug-In Tow Bar Wiring Kit BLU92HR
- Q&A: Is Vevor RN-QVR 7500 Tow Bar Compatible With Blue Ox Base Plates
- Q&A: Parts Needed to Flat Tow a 2013 Chevrolet Sonic Sedan Automatic Behind a Motor Home
- Q&A: Flat Tow Set Up For 2022 Chevy Colorado
- Q&A: Parts Needed to Flat Tow a 2016 Ford Fiesta SE Behind an RV
- Q&A: Which Accessories are Needed to Flat Tow 2013 Chevy Sonic
- Q&A: Brake Controller and Wiring Recommendation for 2014 Chevy Silverado 1500
- Article: Can You Flat Tow a 2025 Cadillac Escalade?
- Article: Trailer Hitch Installation Tips
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Most Popular Wheel Bearings
- Article: How Level Should a Tow Bar Be When Flat Towing
- Article: How to Choose a High-Low Adapter
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited


