bing tracking image
  1. Trailer Leaf Springs
  2. etrailer
  3. 26 Inch Long
  4. Double Eye Springs
  5. 6000 lbs
  6. 6 Leaf
etrailer Rust-Resistant 6-Leaf Double Eye Spring for 6K Trailer Axles - 26" Long - Dacromet
etrailer

etrailer Rust-Resistant 6-Leaf Double Eye Spring for 6K Trailer Axles - 26" Long - Dacromet

Part Number: e88SR
In Stock
$97.48
Trailer Leaf Springs
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Tired of rusty, flaking running gear on your trailer? Need more corrosion protection for launching your boat or towing over heavily treated roads? Upgrade your suspension with this long-lasting, supremely rust-resistant leaf spring. Great Prices for the best trailer leaf springs from etrailer. etrailer Rust-Resistant 6-Leaf Double Eye Spring for 6K Trailer Axles - 26" Long - Dacromet part number e88SR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (526)
  • Q & A (0)
  • Photos

etrailer Trailer Leaf Springs - e88SR

Highlights

  • Rust-Resistant Dacromet Finish: Protects against saltwater and road chemicals for long life.
  • 3,000-lb Spring / 6,000-lb Axle Rating: Delivers solid support for heavy-duty towing loads.
  • 26" Eye-to-Eye Length: Matches common hanger spacing for secure, proper suspension geometry.
  • 1-3/4" Wide x 9/16" Eye with Nylon Bushing: Fits standard hardware and runs smooth and quiet.
  • 6-Leaf, 3/8" Thick Steel Stack: Absorbs bumps and reduces bounce for steadier trailer control.
  • Direct Mount to Existing Hangers: Bolts up with standard hardware (sold separately) for easy swap.

Features to know about

Stops Rust Before It Starts: Dacromet Finish With 700-Hour Salt Spray Rating

If your old springs are flaking apart from salt or water exposure, this 6-leaf double-eye spring ends that problem. Its Dacromet coating holds up for 700 hours in salt spray testing, giving far better defense than bare steel or basic zinc coatings. It’s ideal for trailers that see regular splash-downs or winter road salt and keeps your suspension looking clean and solid for the long haul.

Close-up image of etrailer Rust-Resistant 6-Leaf Double Eye Spring with Dacromet coating showing corrosion-resistant finish and double-eye design.

Side-by-side comparison of a new Dacromet-coated leaf spring and a heavily rusted spring showing the corrosion resistance of the etrailer Rust-Resistant 6-Leaf Double Eye Spring.

etrailer double-eye leaf spring with Dacromet rust-resistant coating shown on white background.

Side-by-side comparison of a rust-resistant Dacromet leaf spring and a rusted spring showing corrosion difference.

Heavy Loads Stay Stable: 6-Leaf Steel Construction Rated for 6,000-lb Axles

Built from sturdy steel, each spring carries a 3,000-lb capacity for a total of 6,000 lbs per axle. The 6 tightly stacked leaves handle weight evenly and soak up road shock so your trailer tracks steady instead of bouncing or swaying. The 3/8" thick leaves keep their shape under stress, giving you dependable support mile after mile.

Direct Replacement Fit: 26" Eye-to-Eye With 1-3/4" Width

Swapping out worn springs doesn’t have to be complicated. This spring measures 26" from center to center of the eyes and fits 1-3/4" wide hangers and hardware (sold separately). It mounts to standard suspension setups using 9/16" bolt holes with nylon bushings already in place, saving you setup time when you’re under the trailer.

Detailed image of etrailer Double Eye Leaf Spring showing eye ends, center bolt, and multiple spring leaves for trailer suspension installation reference.

Close-up of double-eye trailer leaf spring showing eye ends, leaves, and bushing connection points.

Smooth, Quiet Movement: Nylon Bushings Reduce Friction and Wear

Each spring eye comes fitted with a nylon bushing that allows the suspension bolts and shackles to move freely. The result is quiet, low-friction travel that cuts down on squeaks and keeps components from wearing out too soon. It’s a small part that makes every mile smoother.

Built to Last in Real-World Use: Simple Maintenance, Long Service Life

Whether you tow across salted highways or launch at the marina every weekend, these rust-resistant springs stay solid. Replacing both sides together restores proper alignment and even ride height, keeping your trailer level and handling the way it should for years to come.

Specs

Capacity

  • Spring capacity: 3,000 lbs
  • Axle capacity: 6,000 lbs

Dimensions

  • Length from center of spring eye to center of spring eye: 26"
  • Spring width: 1-3/4"
  • Eye diameter with bushing: 9/16"
  • Eye diameter without bushing: 11/16"
  • Leaf thickness: 3/8"
  • Number of leaves: 6

Quantity

  • Quantity: 1 leaf spring

Warranty

  • Limited lifetime warranty

Additional Dimensions

  • See table below:
Part NumberABCD
e88SR13"14"26"4-1/4"

Technical diagram of etrailer Rust-Resistant 6-Leaf Double Eye Trailer Spring with labeled dimensions A through D showing overall length and eye spacing.

  • A: 13"
  • B: 14"
  • C: 26"
  • D: 4-1/4"

e88SR etrailer Double Eye Dacromet Trailer Leaf Spring - 6 Leaf - 3,000-lb Capacity

Compares to SP-053275





Customer Satisfaction Score:

Ratings & Reviews

4.7

526 reviews
Review sort icon
Tired of rusty, flaking running gear on your trailer? Need more corrosion protection for launching your boat or towing over heavily treated roads? Upgrade your suspension with this long-lasting, supremely rust-resistant leaf spring.

by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:

Thank you



by:

Good quality



by:



by:



by:

Sales person very helpful in making sure I got the right product. Shipped to my door in a very timely manner. Thanks.



by:

Asking for spring bolt size was a problem. Think that would be something etrailer would know. Otherwise satisfied. Installer is bringing out the correct length.



by:

Loved the spring, fit was perfect.



by:

Ordered these for a project that has been put on hold
Springs arrived
They look nice just haven installed yet
Only thing is I do not understand why they all come with plastic bushings


25
25

See what our Experts say about this etrailer Trailer Leaf Springs

  • Upgraded Suspension Parts for 2020 Grand Design Reflection 320MKS
    Hey Joe, welcome back! With a 35" wheelbase the MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers # MR29DR is the correct fit. I verified your Reflection has 6k axles on the Grand Design parts site so the # APUBR-8 is also correct and so is the capacity on the # e88SR. Did you account for the leaf springs flattening out over time? Assuming you did, these will work as a replacement with the 26" eye to eye measurement. The shackle strap length isn't listed on the parts site so you...
    view full answer...
  • Replacement 26" Double Eye Leaf Spring for D52 Dexter Axle
    Hey Scot, thanks for all of the details! The D52 on your axle should mean that the axle is rated for 5,200 lbs so if that 26" you measured is with the frame lifted up so there isn't pressure on the spring, then I recommend picking up the etrailer # e88SR which has a Dacromet finish and a slightly higher weight rating (6K) which will all help to increase the life of the leaf spring. If you measured the 26" with the weight of the trailer on the leaf spring, then you'll need something a...
    view full answer...
  • Replacement Suspension Components for Mallart M210RB
    Hey Mark, the etrailer leaf springs part # e88SR would be a great replacement for what you have as long as your axle capacity is 6k as that's what these are intended for. Some people will run a slightly higher leaf spring rating so if that's what you are wanting to do that is fine too. If you have a different axle rating just let me know and I'll make sure these are what you'd need. For a standard equalizer replacement you would want the part # K13-142-02 or for a cushioned set we have...
    view full answer...
  • What Would Cause Trailer Equalizer to be Tilted to One Side After Install of New Leaf Springs
    Hey Matthew, what you you are experiencing is due to going with leaf springs that are too long and it forces the equalizer to kind of fold in on its self. I checked your order notes and you went with the part # e88SR which is a 26 inch long leaf spring for a 6k axle. So the correct spring that would fix the issue would be the part # e78SR which is 25-1/4 inches long instead. I know it sucks to have to buy new springs and redo all the work you did but it's unfortunately only way to fix it....
    view full answer...
  • Replacement Leaf Springs, Shackles, and Equalizer for a Tandem Axle Boat Trailer
    Hey Kyle it sounds like your leaf springs are too long. How did you measure them to get 28-1/4" long? We recommend lifting up the side of your trailer and getting the weight off of the suspension then measuring the leaf springs from eye to eye. The older springs are the farther they stretch and this sounds like what you're dealing with. I would need to know how long your springs are from eye to eye, the capacity of your axles, and the amount of leafs to recommend the correct replacement....
    view full answer...
  • Does Double Eye Leaf Spring Orientation Matter for Installation
    Hi John; there is no front and rear to a double-eye leaf spring like the # e88SR. You can install it in either direction.
    view full answer...
  • Correct MORryde Rubber Equalizers for Forrest River 31QBH with 5,200 lb Lippert Axles
    Thank you so much for all off the information! All of the things you found mean you need the 33" Wheelbase MORryde Rubber Equalizers for Tandem Axle Trailers # MR87ZR. Since your current leaf springs are 14+ years old that would explain why your wheelbase is measuring a little wider. Over time leaf springs will wear out and extend a little so 14 years will definitely do what you're seeing. To replace your leaf springs the closest we have to what you're looking for is our 6-Leaf Double...
    view full answer...
    Image 1 for
  • Changing To Larger 5,200LB Axles Will 6,000LB Axle Springs Be Able To Be Used With Thicker Springs?
    So first I want to verify how you measured the leaf springs. On the etrailer Rust-Resistant 6-Leaf Double Eye Spring for 6K Trailer Axles # e88SR the 26" measurement is from center of leaf spring hole to center of leaf spring hole when the spring is relaxed. If you got the measurement off a model number it could be a different length since some measure leaf spring length when the springs are flattened. It that is the case you would likely need to consider either the 25-1/8" # e47SR which...
    view full answer...
  • Replacement Leaf Springs, Equalizers, Shackles and Wet Bolts for 2017 Grand Design Reflection 29RS
    Grand Design lists several possible axles for your 2017 Grand Design Reflection 29RS so you will need to identify which you have to get the correct parts. You should be able to find this information on the axle tag. What I can tell you is that whichever capacity you have the correct replacement leaf springs measure 26" spring eye to spring eye. If you have one of the 5,200 lb axles you can use the following: -6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 26" Long - Dacromet # e88SR These...
    view full answer...
  • Replacement Leaf Springs For 2015 Forest River Cardinal 5TH Wheel With 6,000LB Tandem Axles
    I was able to determine you will have 26" long leaf springs like our etrailer # e94SR leaf springs. The only upgrade we would carry for just the springs are our Dacromet # e88SR coated springs which help to resist corrosion. You can dramatically improve your ride quality and upgrade to stronger springs by installing the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers # RM-2460-2570. This kit includes leaf springs rated for 7,000LB axles so they will be stronger but...
    view full answer...
  • How To Measure Leaf Springs on a 2015 Grand Design Reflection 308BHTS For Additional Stability
    The leaf springs on your 2015 Grand Design Reflection 308BHTS are going to be 1-3/4" wide, as this is the size used on double eye leaf springs. I wouldn't get to caught up in the amount of leaves your spring has as you can switch to a different amount of leaves if you are replacing them all. To measure the length from center eye to center eye you do not want to have any weight compressing the spring. I find the easiest way to measure is along the radius of the spring from center of bolt...
    view full answer...
  • Replacement Leaf Springs for 2022 KZ Sportsmen Classic 191BHK
    Finding the correct replacement leaf springs requires measuring their length and knowing your axle capacity. It would be great if I could confirm replacement parts based on the year, manufacturer, and model but unfortunately it doesn't work that way. You can get the length of your leaf springs by measuring spring eye to spring eye, and your axle capacity from the tag on your axle. I have attached an article below which shows how to measure your leaf springs. You may also be able to get...
    view full answer...
  • How to Choose Correct Replacement 6K Leaf Spring for Montana High Country 5th Wheel
    We have a handful of 6K leaf springs, like the part # e94SR you were looking at, that could potentially work for your Montana High Country but I'll need you to measure the distance from the center of one eyelet to the center of the other eyelet to make sure we get the correct length to you. The correct way to do this is to lift your trailer up by the frame so there isn't any weight that's compressing the leaf spring. Once we know the length of your leaf spring I'll be able to make a recommendation...
    view full answer...
  • How to Mount 6,000LB Under Slung Axle Under The Leaf Spring
    To mount an under slung axle like the Dexter Trailer Axle # 8327826-EB below a set of the 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles # e88SR you will need an over-under kit. The Dexter Trailer Springs Over-Under Conversion Kit # K71-385-00 will fit the 3" diameter 6,000lb axle I linked above.
    view full answer...
  • Parts Needed To Create Triple Axle Suspension Slider For Adding Larger Wheels/Tires On Boat Trailer
    While we currently do not carry the slider suspension mounts used on boat trailers we do have most of the necessary components which will allow you to build some. You will need to source the angle iron locally to mount the Triple Axle Hanger Kit # APTT5. Once you have the hangers welded in place you will be able to have the assembly galvanized at a local shop. We do now carry leaf springs with a Dacromet coating for increased longevity. These springs are rated for a 6,000lb axle as we...
    view full answer...
  • Picking Out Replacement 26 inch Long Leaf Spring for EZ Loader Triton 20TRX
    Hey Raymond, sorry to hear about what happened to your trailer! That sounds awful...we do have 26 inch long leaf springs but since I don't know what axle capacity you have you'll need to figure that out first by checking the axle tag to determine this. If you have a 4k axle part # e48SR If you have a 6k axle part # e88SR 4,500 # e27SR 2,000 lb # e77sr
    view full answer...
  • Replacement Leaf Springs For Tandem Axle Trailer With 5,200LB Axles and 29-1/2" Hanger Seperation
    You are going to need 26" long leaf springs. We have our Standard # e94SR or the Rust Resistant # e88SR springs you can select from. Both of these are the correct 26" length you need and have a weight capacity of 3,000lbs per spring. Be sure to replace all 4 of your springs so they work together and do not place excess weight on one of the axles due to having a slightly higher spring rate than the 5,200lb springs you currently use.
    view full answer...
  • Picking Out Replacement Brake Assemblies and Leaf Springs for 2021 Grand Design 297QB
    I don't have a way to know what axle capacity your trailer has so I am not able to determine that for you but I can help you figure out what you would need. Check the axles on your trailer and you should see a label that has the capacity listed. With that we can determine the correct brake assemblies like the part # AKEBRK-35-SA which fit the very common 3,500 lb axles. For leaf springs we would also need the length of your current springs. For example the part # e54SR fits 3,500 lb axles...
    view full answer...

Do you have a question about this Trailer Leaf Spring?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Jacob H
Installed by:
Jacob H
Employee Jameson C
Expert Research:
Jameson C
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Justice A
Updated by:
Justice A
Employee Mike S
Written by:
Mike S
Employee Thomas T
Video by:
Thomas T

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924