Upgraded Suspension Parts for 2020 Grand Design Reflection 320MKS
Updated 02/18/2026 | Published 02/17/2026 >
Products Featured in This Question
Question:
I have a 2020 Grand Design Reflection 320 MKS. I would like to upgrade my suspension system. I have a 35in wheel base. Leaf springs are measured at 1.75in wide 26in eye to eye. 6000lb tandem axle. I currently have the following parts in my cart and would like you to look them over for errors or omissions. APUBR-8 X2 e88SR X4 MR46ZR MR29DR MR33WR Thanks Joe
asked by: Joe J
Expert Reply:
Hey Joe, welcome back! With a 35" wheelbase the MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers # MR29DR is the correct fit. I verified your Reflection has 6k axles on the Grand Design parts site so the # APUBR-8 is also correct and so is the capacity on the # e88SR. Did you account for the leaf springs flattening out over time? Assuming you did, these will work as a replacement with the 26" eye to eye measurement.
The shackle strap length isn't listed on the parts site so you will need to measure those as well. If yours are 2-1/4" center hole to center hole then the # MR46ZR is the correct kit. If they're 3-1/8" you need # MR76ZR instead. The MORryde X-Factor Crossmember # MR33WR is compatible with the AllTrek 4000 so you're all set there. The parts you listed cover everything aside from those measurement verifications.
Where are you headed with the Reflection once you get all of your upgrades installed?

Jerry R.
2/18/2026
I had the alltrek 4000 and the larger shackles installed on our keystone cougar hero edition and comparing what came on it these are like day and night. Our first ride was from Mesa to Tucson, AZ and as you well know some of the roads are horrible in the US. But short or not it definitely was noticeable smoother ride.

Robert S.
2/18/2026
You’re adding a worthwhile suspension system that I myself performed on my 2020 Voltage with the exception of new leaf springs. The All Trek 4000 made a world of difference with bucking and rough roads, the X factor cross member stabilizers improved the handling on the highway, literally eliminated sway. The same Andrade suspension on most trailers should be outlawed as they are dangerous and unsafe l. You’ve made a great choice, you won’t regret it.
Product Page this Question was Asked From
MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers - 35" Wheelbase
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- MORryde
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: trailer leaf springs
- Search Results: lippert ground control
- Search Results: morryde trailer suspension parts
- Search Results: morryde suspension upgrade kit for tandem axle trailers
- Search Results: lippert controller parts
- Q&A: Replacement Leaf Springs for 2021 Keystone Raptor Toy Hauler
- Search Results: road armor equalizer
- Search Results: lippert trailer suspension parts
- Shop: MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers - 35" Wheelbase
- Video: Breaking Down the MORryde Suspension Upgrade Kit for Tandem Axle Trailers
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Q&A: Can A 6,000 lb Leaf Spring Be Replaced With A 7,000 lb Spring Without Replacing Axles?
- Shop: MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Video: Let’s Check Out the Rooster Catch for RV Screen Door
- Video: Turn Rough Roads Into Smooth Rides – MORryde Shows Off Their Suspension Upgrades
- Video: Bullet Door Latch for RV Screen Door Spec Review
- Video: MORryde Tandem Axle Trailers AllTrek 4000 Equalizers Review
- Video: MORryde X-Factor Crossmember Installation - 2020 Grand Design Momentum 5W Toy Hauler
- Shop: RV Roof Membrane
- Shop: RV Power Cord
- Shop: MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Shop: Replacement Front Jack for Lippert Ground Control 3.0 Leveling System
- Shop: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 25-1/4" Long
- Q&A: Replacement Legs for Lippert Components Ground Control 3.0 Electric Leveling System
- Q&A: Want To Upgrade From CRE 3000 Suspension On 2023 Grand Design Momentum 336M
- Q&A: Troubleshooting Lippert Ground Control 2.0 Leveling System Error Code
- Q&A: Replacement Legs for Lippert Ground Control 3.0
- Q&A: Is It A Problem If I Get Higher Rated Leaf Springs?
- Video: An In-Depth Look at the MORryde X-Factor Crossmember for Standard Frame Hangers



Joe J.
2/17/2026
Robin thank you for your response. I took all the weight off the wheels and remeasured and it looks like they are 25 1/4 eye to eye. I have seen some people upgrading the leaf springs from 3000lb to 3500lb just to give a little more support. I know this doesn't increase the gvwr but it will give me a little piece of mind (the roads aren't getting better). I am looking at part# TRU52FR. What are your thoughts and will the U-bolt set still work.