Parts Needed To Create Triple Axle Suspension Slider For Adding Larger Wheels/Tires On Boat Trailer
Updated 01/24/2023 | Published 01/23/2023
Products Featured in This Question
Question:
Looking for a suspension mount/ slider for a boat trailer. Galvanized, triple axle for 33” of spacing. Will need surprise and all components. Currently on 5200lb axles which will be reused. Just adding some space between axles for larger 16” tires/ wheel setup. Can you direct me to these parts?
asked by: Dave C
Expert Reply:
While we currently do not carry the slider suspension mounts used on boat trailers we do have most of the necessary components which will allow you to build some. You will need to source the angle iron locally to mount the Triple Axle Hanger Kit # APTT5. Once you have the hangers welded in place you will be able to have the assembly galvanized at a local shop.
We do now carry leaf springs with a Dacromet coating for increased longevity. These springs are rated for a 6,000lb axle as we currently do not have them for a 5,200lb. We have them in a 25-1/4" # e78SR and 26" # e88SR length.
The CE Smith U-Bolt Kit # CE23003 includes galvanized plates and zinc coated U-bolts for increased corrosion prevention.
If there are any other parts you will be needing please let me know and I can direct you to those parts.
Product Page this Question was Asked From
Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear/Center
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Triple Axle
- etrailer
more information >
Continue Researching
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Article: Trailer Wiring Diagrams
- Q&A: How To Determine Where To Mount Your Axles On A Trailer Build
- Q&A: Direction of Equalizer # TREQ105 When Installed on Triple Axle Trailer
- Q&A: Replacement Equalizers and Shackle Straps for 2007 Keystone Raptor 3712
- Q&A: Recommended Leaf Springs and Equalizers for Triple Axle Trailer With Double Eye Springs
- Q&A: Will Triple Axle Hanger Kit # APTT5 Work with Leaf Springs E64SR
- Q&A: How to Flip a 2" Square Axle so the Axle is Below the Springs
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Where to Position the Trailer Axle?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Ram Trailer Tow Prep Package
- Article: Double-Eye Trailer Suspension System Review
- Article: Where Should the Heavy Weight Be on a Trailer?