Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Low-slung trailers can scrape or bottom out on driveways and rough roads. This 5-7/16" tall center hanger gives your suspension the lift it needs for better ground clearance and a level stance. It’s one of the tallest options available, measured from the top of the hanger to the center of the bolt hole, so it’s ideal when you need extra height without changing the axle setup.
A suspension mount has to take real abuse from bumps, potholes, and heavy loads. This hanger is built from 0.36" thick steel for solid strength and durability. It suspends the equalizer on tandem- or triple-axle setups, giving your double-eye leaf springs a secure and reliable anchor point that keeps the suspension geometry true mile after mile.
Matching spring hardware makes all the difference for smooth suspension movement. This center hanger works with 1-3/4" wide double-eye springs that use 9/16" diameter eyes and a 3/4" diameter bolt (sold separately). The inside diameter is 1-7/8", giving proper side clearance so the spring and equalizer can move freely without binding.
If you’re refreshing worn suspension parts or building a stronger setup, this hanger fits right in. It’s configured as a center hanger for double-eye springs on tandem or triple-axle trailers, making it an easy choice for upgrading stability, improving ride quality, or restoring proper alignment after years on the road.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the 5-7/16" tall center hanger bracket for double eye springs. This center hanger will suspend the equalizer on tandem or triple axle trailers to provide attachment points for you double eye inaudible 00:00:13 springs. It is a weld on installation, attaches to the underside of your trailer frame. This hanger's designed to fit 1-3/4" wide double eye springs and it has 3/4" diameter eyes right here for the bolts. It is designed to work with a 3/4" diameter bolt. We do sell those separately on our website, and they're listed on the product page of this product as a related product. Quantity is just for one hanger. Give you a few spec on this. We're going to measure the overall dimensions, so we'll go the length from this edge to this edge. It's right at 3".
The overall width, outside to outside, is right at 2-5/8". Now the inside width is probably right at 2" and the overall height from the very bottom, let's turn it the way and we'll go from the very bottom to the very top of the bracket, is 6-1/8" tall. When they do describe this hanger they call this a 5-7/16" tall center hanger bracket. Where they get that measure from, the hangers are always measured from the center of the bolt hoe to the top of the hanger. So if we got center to top, that'll get you your 5-7/16" tall bracket. That should do it for the review on the 5-7/16" tall center hanger bracket for double eye springs.
Customer Satisfaction Score:
88% were satisfied with this product
12% of customers were not satisfied
Ratings & Reviews
Better then expected.
very good product excellent service
exactly what I ordered
Great people to work with, very helpful, fast service.
good quality product, fast shipping.
Very heavy duty. Fast shipping.
Very heavy duty hanger, better than original. Worked perfectly on our trailer. Timely delivery on all parts ordered. Thanks.
Brackets arrived in perfect condition. Only problem is the tape holding the box together didn't hold. Luckily the brackets were large and didn't fall out. Etrailer will always be my trailer related stuff go to store.
As usual for me, not doing anything standard. Bought this product because I am rebuilding a trailer and upgrading axles to 9000 lbs making trailer GVWR 18000. Trailer always sat high so am adjusting hanger lengths. Still using 9/16 bolts so welded up 3/4 hole on this and then added multiple 9/16 holes to allow adjustability. I wanted the added wall thickness because of these added holes as well as the increased GVWR. Quality part that is working well for me so far. Would have rated higher except for the fact it required the modifications for my application.
The Hangers I purchased were of excellent quality. They fit the CHANNEL on my boat trailer perfectly. I only encourage customers to check and double check your measurements before final ordering process. I did not allow for a 1/4" for angle iron that was attached to the channel for my axel springs. But that was my fault. I will definitely be ordering parts from this company for all my parts.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Robin M.
7/23/2017
Great!!!