Will 5-7/16" Tall Center Hanger for Double-Eye Springs Work with 9/16" Bolt

Updated 04/24/2020 | Published 04/23/2020

Products Featured in This Question

Center Hanger for Double-Eye Springs - 5-7/16" Tall - 3/4" Bolt Hole

(22)

$33.51

Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 5-7/16" Center

(119)

$159.91

Question:

The dimensions of the 5 7/16 tall suspension brackets are perfect but I need it with a 9/16th bolt hole instead of 3/4- do you have that?

asked by: Nico B

Expert Reply:

Even though the 5-7/16" Tall Center Hanger for Double-Eye Springs # 115919 has a 3/4" diameter bolt hole, this is actually designed to work with 1-3/4" wide double-eye leaf springs that install using 9/16" diameter bolts which I think is what you're getting at, so this should work perfectly for your application!

If you check out the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs # APT4 you can see where these same hangers are used in a kit that comes with 9/16" bolts so having that hole a little larger on the hanger is completely acceptable.

expert reply by: Jon G