What Should the Bolt Diameter be on the Center Hanger to Use with the Curved Equalizer # TREQE34
Updated 04/25/2018 | Published 04/24/2018
Products Featured in This Question
Question:
What is the diameter requirement for the trailer center position perch, when using the wet bolt that comes with this part # TREQE34
asked by: Dave P
0
Expert Reply:
If by "perch" you mean center hanger, then you would want the center hole to have a 3/4" diameter like what you find on the hanger part # 115919. This will allow you to use the Shackle Bolt # TRFA73Z916DLNZ or Wet Equalizer Bolt # 126A1 with the Curved Equalizer # TREQE34 and keep the movement at a minimum.
expert reply by:
Jon G
0
Product Page this Question was Asked From
Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 3/4" Center Hole
- Trailer Suspension Parts
- Standard Equalizer
- Camper
- Car Hauler
- Utility Trailer
- Double Eye Springs
- 7-3/4 Inch Long
- Tandem Axle
- Triple Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer safety chains
- Search Results: safety cables
- Search Results: trailer wiring
- Shop: Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Search Results: spindle washer
- Search Results: spindle nut
- Search Results: slipper springs ~ 1~7/8 inch trailer suspension parts
- Search Results: 1 3/4 spring hanger
- Shop: TowSmart 4-Wire Y-Harness Connector - Trailer End - 25' Ground
- Shop: Mighty Cord 4-Way Flat Trailer Connector - Wishbone Style - Trailer End - 25' Long
- Shop: CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc
- Shop: Spring Keeper Bolt for Slipper Springs - 3-1/4" Long
- Q&A: Troubleshooting Trailer Suspension Bolts Splines that Aren't Seating
- Shop: Rear Hanger for 2" Slipper Spring - 1-1/4" Tall x 1" Long x 2-1/2" Wide
- Video: What to Know About the Zinc Shackle Bolt with Locknut for Double-Eye Springs
- Video: Review of Redline Trailer Suspension Parts - Suspension Bolts - 38-3TB
- Video: Ultimate Overview of the CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles
- Shop: Locknut for Spring Keeper Bolt - 5/16" Diameter - Zinc Plated
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Suspension Enhancement For A Trailer With 8,000 Pound Axles
- Q&A: What Is The Difference Between TREQE1 And A2252CB-GALV?
- Q&A: Are the BP01-301 Brake Magnets the Same as BP01-330 Brake Magnets?
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Q&A: Replacement for Furrion C-FOS07TAPK-012
- Q&A: Can TecNiq Contoured Taillight Replace Wesbar # 281595
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)