Lifting a Utility Trailer for Compatibility with Lifted Jeep

Updated 05/22/2020 | Published 05/20/2020

Products Featured in This Question

Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole

(307)

$12.42

Center Hanger for Double-Eye Springs - 5-7/16" Tall - 3/4" Bolt Hole

(22)

$33.52

Correct Track Trailer Alignment and Lift Kit - Single Axle

(55)

$201.28

Question:

Ive got a lifted jeep, so my trailer will be too low. I need to lift it approximately 6inch off the axel. Its already got a flipped axel, so my question is this: should I install new springs with more leafs? Should I install longer hangers? Or can I put blocks in-between the axel and the springs? Thanks

asked by: Sheldon

Expert Reply:

You can raise your trailer about 2 more inches using the Correct Track Trailer Alignment and 2" Lift Kit - Single Axle # LC87120. Then you can also add longer hangers if you prefer. We do have long hangers like # 115919 which are the longest option we have. New springs or blocks is not a good option.

You will probably need to use a ball mount with a drop to allow you to tow level. I've attached a link to the options and have also attached an article to help you with measuring for fit.

expert reply by: Jason S