Center Hanger with Larger Drop for Use with EZ Flex Equalizer

Updated 09/19/2019 | Published 09/18/2019

Products Featured in This Question

Center Hanger for Double-Eye Springs - 5-7/16" Tall - 3/4" Bolt Hole

(22)

$33.95

Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole

(220)

$32.65

Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs

(632)

$410.92

Question:

i would like to use the dexter ez flex equalizer. but i would also lke to use a center hanger like the one for double eye springs that is 5 7/16ths. is there a way to make it work with the 3/4 inch hole the hanger has?

asked by: Matthew

Expert Reply:

The EZ Flex Equalizer part # K71-652-00 requires a 9/16 inch diameter bolt hole for the center hanger which is not the same as the # 115919 that you referenced. As it has a 3/4 inch diameter hole. So the closest hanger to that with the correct diameter hole is the part # E4139 which has a drop of 4-1/4 inches and a bolt hole diameter of 9/16 inch like you need.

There isn't a way to use the EZ Flex with the hanger you mentioned since the hole diameter is too large.

expert reply by: Jameson C