Troubleshooting Front Equalizer On Triple Axle Trailer Hitting Trailer Frame  

The issue you are experiencing is a result of leaf springs that are too long for your hanger spacing. You will want shorter springs and I recommend also going with a capacity more geared toward your axles. You will want to use the Triple-Axle Trailer…

Sounds like it's a good time to go ahead and replace all of your 7k slipper springs with the part #e74SR and use a slipper spring triple axle hanger kit part #AP316-H302 that you referenced and you'd be set to make the modifications you are…

I can help you determine exactly what you need to replace the suspension in your triple axle trailer, although we don't have any type of database which has each part for each year, make and model of trailer that would tell us exactly what you…

The Triple-Axle Trailer Hanger Kit #APTT3 that you referenced is designed to work on axles with capacities of 2,000 lbs to 7,000 lbs so it should work very well for you. I attached a picture that has a chart that shows exactly how you should space…

I have a solution for you, but there is not an available axle with exactly 92.5" hub face to hub face or 78.5" spring center to center measurements that could be used as a replacement. For this reason, I would recommend re-measuring to make…

Yes, I would recommend keeping the bolts of the #AP233 lubricated. An easy way to do this is to use wet bolts like part #126B2 which have a zerk fitting that allows for easy application of grease to them.

In regards to trailer suspension kits like the Suspension Kit for Tandem-Axle Trailers part #AP233, the shackle bolt heads are indeed seating into the hangers via the knurling on the bolt. If you hold a wrench on the bolt head and tighten the nut,…

The Dexter Heavy Duty Suspension Kit #K71-360-00 is designed for 33 inch axle spacing. To add your third axle, you cannot simply add a hanger spring and axle. You can keep your 35 inch spacing but you will need to relocate your hangers. I've…

You can absolutely add a 3rd braking axle to your trailer. You will simply want to match your current axle for dimensions and capacity. I've linked the page to your options we carry to assist. Then you will need to change your hanger locations…

When looking to convert your triple axle double eye spring trailer to slipper springs, I recommend going with the 5-Leaf Slipper Spring, #e74SR, for your 7,000 LB axles. This spring has a 3,500 LB capacity, an axle capacity of 7,000 LBS, and the…

If you have 2 inch wide 7k slipper springs like the part #e74SR and your current axles are 38 inches apart on center the hanger kit part #HAP-105-205-01 that you referenced would be what you'd need.

The difference in the spacing for the #APTT5 hanger kit comes in to play with the center spring due to the additional components attached at each end of the spring. Both the first spring and last spring have the same spacing since they are each…