Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you need more visibility without adding bulk, this TecNiq PCP2 side marker light delivers. At just 1-3/4" long by 1" wide and 1/2" deep, it fits neatly on most surfaces while still putting out strong illumination from its two red LEDs. It meets both PC and P2 specifications, so even with its small size, it provides reliable brightness for clearance and marking needs. Running on 9 to 14 volts DC, it’s efficient and consistent without dimming or flicker.
Moisture, dirt, or vibration won’t stop this light. The TecSeal urethane potting material seals the circuit board completely, protecting it from dust and water intrusion. It’s built to be waterproof and submersible, so whether you’re hauling through rain or washing down equipment, it stays dry inside and keeps working. The housing is also UV-resistant to prevent fading or cracking from sun exposure.
If you’re after a clean, finished look, the stud mount design makes it easy. The stainless steel ground stud anchors the light securely while hiding any mounting hardware from view. No screws or exposed bolts—just a smooth fit that looks sharp and professional once installed. The included 9" pigtail with a standard non-polarized connector keeps wiring simple too.
This light is made for the long haul. With solid-state LEDs and sealed electronics, there are no bulbs to replace or parts to rust out over time. TecNiq backs the PCP2 side marker with a lifetime warranty, so once you install it, you can count on dependable performance mile after mile without worrying about replacements or failures.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone, Steven here with etrailer.com. Today we're taking a look together at the TecNiq PCP2 Side Marker light. It uses a stainless steel ground and it's a red lens, red color. So, folks, this is powered by two bright LEDs inside of here and you can mount it pretty much any way you want, horizontal or vertical. It is UV-resistant, dust and waterproof, and it's stud-mounted. So, that stud is where you're getting your ground off of, it's going through the metal of your trailer, and it's getting grounded.
So, if for some reason, you're trying to put this on, maybe a fiberglass, plastic, trim piece or something, you need to make sure you're getting a ground wire attached to this nut somehow as well, otherwise this light won't work. And it measures 1 3/4 inches across, one inch wide, and about 1 1/2 inch tall. Runs on 12 volts, and again, stud-mounted, and you do have a nice little pigtail here. So, I do wanna go ahead and get this powered up for you today, so let's take a look together real quick. And I'm just using a little testing box we have here.
So, again, as we can see, I'm getting my ground right off of the stud here. And let's go ahead and turn off the overhead lights so we can get a better view of this in the dark. So, as you can see when my wire's hooked back up, we have a nice, bright LED, again, vertical or horizontal, whichever way you wanna mount it. And obviously, you know, you'd be having it grounded through the trailer frame, so you won't have to worry about it. I just don't have a big enough eye of the other clip here to hold it tight, so bear with me.
And again, red obviously, great bright. Let's see if I can keep this lit up and zoom out here and give you a better view far away as well, so, you can see, there we go. So if you're far away even you're gonna be able to notice this while you're driving, people are gonna see you, you're gonna be visible to other pedestrians and drivers alike. So this would be a great safety thing as well if you're replacing one of your lights or some of that nature as well. So again, folks, the TecNiq PCP2 in red.
I'm Steven, thanks for watching.
Ratings & Reviews
Joshua B. Went above and beyond for me. I will definatly keep doing business with etrailer. Thanks again Josh.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike L.
10/2/2025
Thanks, Brandon! We're glad to hear that Josh took good care of you!