Video Transcript for Review of TecNiq Trailer Lights - Clearance Lights Red - TN35TR

Hi everyone. Steven here with etrailer.com. Today we're looking at our TecNiq PCP2 marker light. It's a self-grounded in red color. Now folks, this is powered by two LEDs. I do have it pre-wired today for you with a little demo box so you can see it lit up.

And it is UV resistant. Let's go ahead and turn off the overhead light so you can see it better in the dark. And it is dust and waterproof. Now this would be stud mounted with no visible fasteners and it does get grounded through the trailer frame. It does use and feature the TecSeal urethane potting material, so it's gonna guarantee circuit board protection.

And it's a standard non-polarized connector. Let's go ahead and turn on the overhead lights. And let's go ahead and power this down. So as you can see, it does come with a 6" long lead here. That's the positive wire.

Then again, your ground's gonna get grounded through the ground wire. As far as some quick dimensions, overall, about 2 1/2" long, center to center on the stud holes, 2" on center, and right at 1" wide. Now I do recommend picking up a grommet, sold separately, if you don't already have one. Oh, excuse me. And the grommet looks just like this.

It's item number TN43TR. And what you'll do is your center hole, the wire will go through, and then that grommet will get mounted under there, give you a nice flush, clean connection and help kind of hold everything in place and keep water and stuff off of that backing where it's getting grounded at. So again, sold separately, item number TN43TR. That's the grommet. Folks, that will wrap it up for our quick look together at this TecNiq PCP2 marker light. I'm Steven. Thanks for watching.