Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
If you’re upgrading from older incandescent lights, this oval LED light makes a huge difference. The 16 bright diodes put out an even, clean amber glow for parking and flash brighter for turn signals, helping other drivers see your intent clearly. At just 0.161 amps for the turn signal and 0.009 amps for the tail function on a 12V DC system, it’s efficient enough to keep your wiring cool and your power draw low. The built-in reflector adds extra visibility without needing a separate reflector plate.
This light is designed to hold up over years of use without cracking or fading. Both the lens and housing are made of tough polycarbonate that resists impact and UV wear. The LEDs themselves are solid-state and backed by a lifetime warranty, meaning no filaments to burn out or bulbs to swap. It’s a solid, maintenance-free setup that keeps shining through weather, bumps, and vibration.
For anyone dealing with rain, snow, or water exposure, this model’s sealed waterproof construction is a big deal. The unit is completely submersible, making it great for boat or utility trailers that see wet conditions. You don’t have to worry about moisture fogging up the lens or corroding the wiring—everything inside stays dry and protected so the light keeps working no matter what you drive through.
Installing it looks sharp and stays simple. The recessed mount uses a grommet (A70GB – sold separately) so the light sits flush with the trailer surface for a finished look. It connects using a standard PL-3 style 3-prong plug, compatible with straight pigtail A45PB or right-angle A47PB connectors (sold separately). If you’d rather not cut an existing panel hole, there’s also an optional bracket (BK70BB – sold separately) that works with the same grommet.
This Optronics Miro-Flex light meets DOT requirements for amber turn signal and parking applications, so you can trust that it performs to road-legal brightness and coverage standards. It’s a clean, durable way to modernize your lighting while keeping everything compliant and dependable every time you tow.

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
What's up everybody It's AJ with etrailer.com. Today we're gonna be checking out this is Miro-Flex turn signal and parking light. It's gonna have LEDs in there. We're gonna be putting it on this trailer. Let's check it out. Today we're gonna be putting it on this flatbed Big Tex trailer, and this is gonna have 16 diodes.
It's gonna be way brighter than the one that was in here before. It's also gonna have the mirrored back there, so it's gonna have more light reflect out the front which is also clear, which is gonna let more light through. So let's go ahead and hook it up and see how bright it is. It's got the three prong connector. It goes right into the back of the light.
Since it is a side marker light, it is gonna be amber, as you can see. These line up the plugs (metal clinking) and push it in. Making that connection. Now, it also can be submerged in water. So if you're putting on a boat trailer, that's okay too.
I'm just gonna push it into the grommet. We're gonna try not to install the full brakes. We are gonna take it out after the video but I wanna show you (plastic clicking) how it would go in. Right now we have the tail lights on. I'm gonna switch the functionality to brake lights and then the right turn.
(turn signal clicking) This is amber light, it's also gonna be DOT compliant, and it's gonna measure six and a half inches long, by two and five 16 inch wide. So make sure you measure your lights on your trailer so it's gonna fit. So there are a few different options for side marker lights. The one we have today that we installed, that's got the 16 diodes in it, with a clear lens, and the mirrored background. Now there's another one that you can get that's gonna be LED as well. It's gonna have nine diodes and that also has this part that protrudes, so it's 3D, so you can see it better from the side. Not only can you see it in the rear view mirror but people driving by can see it too especially at the overhang rail here. This is gonna stick out so people can see it when you do need to turn. Now, most part, (metal clinking) these are usually what we say, "You should replace." These are the incandescent lights. You see the bulb on the inside there. That's gonna be a more cost effective option for your trailer. Maybe if you don't wanna redo all the lights you just wanna replace the same one you had before. You can go this way. We just warn that, the bulbs aren't gonna last as long as the LEDs. Now there's the same light, which is a different style. This one's gonna have a tinted lens on the front. It still has the same 16 diodes and it's still a amber side marker light, but you can get it with a tinted lens if that's what you want. Overall, definitely there's gonna be (metal clinking) an upgrade for your trailer, from LED to LED. I could already tell that it was brighter than the one that was on here before. Thanks to the extra diodes and the clear lens. Now, if you're going from incandescent to LED, you're gonna see an even bigger difference. It's gonna be brighter, it's gonna last 50 times longer. So you won't have to replace it as often as you would with an incandescent it's gonna last longer when you're driving down the road. Well, I think that does it. Thanks for hanging out and I hope this helped.
Ratings & Reviews

Steve
3/25/2026
Got water in in shortly after purchase on one of them


Heather A.
12/8/2018
The grommet you need for part # BUL35CB and part # STL35AB is part # A33GB. The pig tail you will need for part # BUL35CB is 2 wire pigtail part # A45CB. The pigtail you will need for STL35AB is a 3 wire pigtail part # A45PB.

Brooke M.
3/20/2025
You'll be a trend-setter before you know it!
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.










Gary R.
1/13/2015
The LED lights are great. Im very satisfied with them. They have held up well and work like a charm with a distinct look to them as well.