Video Transcript for Complete Breakdown of the Miro-Flex LED Trailer Turn Signal and Parking Light

Today we're going to review part number STL35AB. This is the Optronics Miro-Flex, Waterproof, Rectangular, LED Trailer Parking and Turn Signal Light. This is an amber, rectangular light, serves two functions, turn and parking light function. This is a great replacement for incandescent lights. There's no bulbs to replace, no brittle L filaments to break. It does use the Miro-Flex technology. That combines a smooth lens.

If you look under the inside, it's a faceted reflector design. It's gives you a nice, smooth automotive appearance while maintaining the traditional footprint. It does increase the light output while using 90% less energy than incandescent bulbs. The LED light does draw less amps. This is a sealed, molded-plastic waterproof housing and a durable lens. It is corrosion resistant, uses 16 amber LEDs. To mount this, it does require a mounting grommet for flush mount and an industry-standard 3-prong plug for complete installation. I do want to show you those parts.

If you do have those parts already, you can use them. If you need to purchase them, we do sell those separately on our website. The are listed on the product page of this light as replacement parts or related parts. Here's the example of the rubber grommet, part number A33GB. Again, it's sold separately. Basically, your light would just pop it all the way in there for a nice, flush mount fit. The other recommended is the 3-prong plug.

I've 2 different ones. This one, the first one, is the straight 3-wire prong plug. It's part number A45CB. Basically, what you would do with this is just line the plugs up, go ahead and push it all the way in, and you can see the reason it's called a straight 3-prong plug is because the wires come straight out the back. Depending on your application, you can use that one. The other one would be if you need some more clearance.

They offer a right-angle, 3-prong plug. This is part number A49PB. The nice thing about that is when you get the pushed in there, you can see that the wires come out from the light at a right angle to give you some extra clearance. Depending on your application, you'd the choose the correct 3-prong plug that you would need. Let's go ahead an pull this one off. There we go. I'll give you a new dimensions on this. The length of this light from edge-to-edge is going to be right a 5-5/16. Again, the height from very edge to edge, bottom to top, is going to be right at 3-7/16. The depth of it, edge-to-edge right here, is going to be about 1-1/2", and on this end has the extra plastic housing around the plug, edge-to-edge is going to be right at about 2-5/16. This light is Department of Transportation approved. It does come with a lifetime warranty on the LEDs. What I'm going to do now is we're going to go ahead and use one of the plugs. I'm going to hook it up to a 12-volt power supply to give you an idea of the functions and how bright it is. Again, the 3-wire prong plug will have a white wire for the ground. It will have the red wire for the turn signal operation and the black wire for the parking light. We'll go ahead and hook those up. Now with them hooked up, I'm going to go ahead and turn off the overhead lights, go ahead and turn on the 12-volt power, and there you can see the parking light, now bright it is. Then the turn signal function, lights up a lot brighter for the turn signal function. We'll go ahead and turn off our power, turn back on our overhead lights, and that should do it for the review on part number STL35AB. This is the Optronics Miro-Flex, Waterproof, Rectangular, LED Trailer Parking and Turn Signal Light. .