7-7/8" x 3-5/16". 2-Function, waterproof light acts as both a side marker and turn light. GloLight lens creates a solid panel of light. Surface mount with built-in flange - hardware not included. Weathertight plug. P2 rated. 10 Diodes.
Features:
Specs:
This amber LED light serves as either a side marker light or a mid-ship turn signal. The light gives your truck or trailer a distinctive look that's completely street legal. This Optronics GloLight has a unique solid light pattern when lit, so your lights stand out from the rest. Optronics GloLights are a great way to add both style and value to your truck or trailer.
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
The long-lasting, cool-burning LEDs make this light the perfect replacement for incandescent vehicle and trailer lighting. LED lights are more efficient, use less power, and last much longer than incandescent lights.
This light has a weathertight connection as pictured above (weathertight plug sold separately). This type of connection is designed to help block out moisture.
A P2-rated or P3-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Optronics 00:00:03 Glow light LED mid-ship intermediate side marker and turn signal light. This unit's going to feature a sonically sealed, water-proof design. It features poly-carbonate construction of the lens and the housing that's very strong and durable. That's a full LED system. LED's are going to make great replacements for incandescent lights. They last longer, they burn brighter, and they're much more efficient.
You don't have to worry about replacing bulbs or worry about brittle filaments. This particular light is SAE and department of transportation compliant. This is an E and P2 rated light. That's really important when it comes to that intermediate side marker and turn signal indicator for mid-ship trailer lights. Compliancy meets California requirements for mid-ship turn signal on vehicles 30-feet or longer. This is a flange mount design, so you can see that we have the flange going around the perimeter of the light.
Mounting hardware is sold separately. It's going to contain 2 mounting holes, one located on each end. When it comes to the wiring, the unit's going to use a weather tight connection that does require a 3-wire weather type plug. That is needed, it's sold separately and if you're in need of something like that, you can find them here at etrailer.com. The light's going to contain a total of 10 diodes, or LED's, and Optronics is going to put a lifetime warranty on the LED's.
Now again, LED's are going to be great replacements. They also have a much faster response time when compared to incandescent lights. When it comes to the measurements, the unit gives us an overall length measurement measuring from very edge to very edge of pretty close to 7 7/8-inch. Going this direction edge to edge that's going to give us a measurement of pretty close to 3 1/4, maybe 3 5/6-inch. The depth measuring from the furthest out point of the light to the bottom of the mounting flange, that's going to give us a measurement of about 1 5/16-inch. Then the overall depth, very back measuring from the back of the plug to the outermost point of the light, that actually gives us an overall depth of about 2 1/2-inches.
This area right here that's going to have a depth of 3/4-inch. Now the mount holes on the unit, again one right here and one right here, these are going to be separated on center by 7 1/4-inches. The flange has a lip measurement of around 1/2-inch, maybe 9/16-inch, right in that area. This area right here, the raised portion, that's going to give us a length measurement of around 6 1/2-inches. A width measurement of right around 2 1/4. We're going to go ahead and hook it up to our external power source that way you can see what it looks like with power running to it. We'll also be able to turn off our overhead lights. We just need to connect our weather tight plug. It's got the locking tab that engages for a nice, tight, secure connection. Here you can see that once it has power running to it, it has like a tail light function to it, and that's going to be the side marker indicator. Then we apply our turn signals, you can see how the light output increases for stronger signal output. The multi-diode design of the unit really does help optimize the overall light output of the mid-ship trailer light. That's going to do it for today's look at the Optronics Glow light LED trailer mid-ship intermediate side marker and turn signal light.
Average Customer Rating: 5.0 out of 5 stars (12 Customer Reviews)
7-7/8" x 3-5/16". 2-Function, waterproof light acts as both a side marker and turn light. GloLight lens creates a solid panel of light. Surface mount with built-in flange - hardware not included. Weathertight plug. P2 rated. 10 Diodes.Fits perfectly. I made sure the distance between the holes was the same on both. The two pictures show the mounted turn signal vs the broken one(on the ground).
Excellent service and attention to detail. I would highly recommend purchasing from etrailer. Prices are great and they have a wide selection of information that helps with the purchase decision. Very impressed.
Great service and communication as alwa ys.
The light was used to replace a Trimark 1250AX light which got broken and is obsolete.
I had to make a few modifications but it looks like it's always been the light that was there
Again part is directly as describe good quality by this part with confidence
Great product and awesome customer service! Shipping was quick, arrived a day earlier than quoted.
Thank you!
AAAAAAAAAAAA+++++++++++++++++++
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.