Rakes, shovels, and other long-handled tools can eat up floor space when they have nowhere to hang. This dual-arm hanger supports multiple tools on one movable attachment point, letting you reposition storage as your trailer or workshop changes.
Rakes, shovels, and other long-handled tools can eat up wall and floor space when they're stored individually. The extended dual-arm hanger gives your gear a 3" tall x 4-1/2" wide x 7" long inside opening, creating one E-track storage point for multiple tools.
The spring-loaded lever snaps into Snap-Loc or E-track and releases again when you want a different position. Dual arms support heavier items at two points, while the hanger can move from one E-track opening to another as your storage layout changes.
Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone. Steve here with etrailer. Today we're taking a look at our snap lock eTrack multipurpose J hook. So folks, this is going to give you a dual wire hanger. So what you can do with this is it connects simply to etrack and then you'll be able to hang maybe some wide shovels, rakes, those kind of things. Who knows, extension cords, anything you can hang basically.
But the main thing is this has two arms of support. So when you connect that to your e-track, it's going to connect right there and you can pop it off, move it over left or right, wherever you need it in your e-track. But these two arms are going to do a great job if you have like a shovel or something wider, maybe a rake that you can hang on here. You can most certainly hang two different kinds of extension cords or stuff like that as well. It's got a hold of about 133 pounds of working load limit, but it does have a 400 pound brake strength.
It is Z or zinc plated rather, so you don't have to worry about corrosion or rust anytime soon. As far as the length, about eight inches overall out here. Obviously it's at an angle, so it's kind of hard to get an exact measurement, but roughly about eight inches out as far as length. That's going to wrap up our time together folks. I'm Steven.
Thanks for watching.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.