See what our Experts say about this Redline Accessories and Parts

• Replacement 1/2" - 20 Wheel Stud Options
  We have a few different lengths under the 1/2" - 20 wheel stud size so you'll wan to measure the length of what you currently have before ordering a replacement. 1-11/16" Long # K12WB169 1-7/8" # RG03-060 2" Long # K12WB2 2.24" 7-150 2-1/2" # 165995 2-11/16" Long # 7-262 2-3/4" # RG03-080 If you don't see your size you can also go a bit larger and use an open-ended lug nut.
  view full answer...
• Are Drum and Studs for etrailer Trailer Hub and Drum Assembly Available Separately
  Hi Jack; the drum is integrated so you have to get the full # AKHD-655-6-K to replace it. Separate hubs and drums are typically found on larger capacity axles like 10k. The studs can be replaced with # 165995.
  view full answer...
• Can 1/2 Inch Wheel Stud With .54 Inch Knurl Fit Hub With .55 Inch Knurl Stud
  Hi Richard, I'm pretty sure they are the same thing, and the issue is mostly rounding (bear with me a second). The wheel studs that say they have a .54 generally have a .545. Technically, that should round up to .55, but not all do for one reason or another. So that was the long way of saying yes, you can use the Wheel Stud - Drive In 1/2" x 2-1/2" # 165995 with its .54" knurl on your hub with one that has a .55" knurl.
  view full answer...
• Looking For Wheel Stuf 1/2" Diameter 2-1/2" Long With 0.535" Knurl Diameter
  Hey Dallon, thanks for reaching out. Would a 0.54" knurl diameter work for you? Because we do have one wheel stud, part # 165995, that matches your specs. It is 2-1/2" long and 1/2" diameter. The knurl is listed at 0.54" so I imagine that difference of a few hundredths will not be an issue and this will be your best option for a replacement wheel stud. We have nothing with a knurl exactly 0.535 so this is the closest option. Reply below and let me know if there is anything else I can...
  view full answer...
• How To Replace A Broken Wheel Stud
  When finding replacement wheel studs you would have to measure them with a digital caliper like The 4 inch Carbon Fiber Digital Caliper # PTW80157. I will attach a diagram with the measurements needed to get the correct wheel studs you would need. Once you can provide me the measurements of A, B, C, D, E, and F I will be able to get you the correct replacement. For example The Wheel Stud - Drive In 1/2 inch x 2-1/2 inch (Qty. 1) # 165995 measures 1/2 inch diameter and is 2 inches long....
  view full answer...
  
• Replacement Stud and Lug Nut for a 2021 Grand Design Reflection Travel Trailer w/ 6 Lug Dexter Hubs
  Hey Glenn we sure do have a few lug nuts and replacement studs lying around! Your Grand Design has Dexter hubs, so the Wheel Stud item # 165995 is exactly what you'll need. It measures 2-1/2" long, is 1/2" in diameter, and has 20 threads per inch. You'll also need the 1/2"-20 Lionshead Trailer Wheel Lug Nut item # LHLR103. Did you strip out the threads? What has you needing a single lug stud? You can add this information, along with any other questions you have, where it says Add Comment.
  view full answer...
• Replacement Wheel Studs for Hub 22834
  According to the information that I was able to obtain for hub 22834, it more than likely uses Drive In Wheel Stud, # 165995, which measures 1/2 inch x 2-1/2 inch. The absolute best way to determine the correct replacement wheel studs for your hub would be to hammer out one of the existing studs and take a measurement. I have included a link to all of the wheel studs that we offer for your convenience.
  view full answer...
  
• Longer Wheel Studs Needed for Dexter 2,200 Lb Trailer Hub
  In order to install longer lug studs on the Trailer Hub Assembly part # 8-258-50UC1-EZ you will need to use the Drive In Wheel Stud part # 165995 which are 1/2" longer. These new studs should then allow you to retain the wheel spacers therefore provide clearance from the fender. In order to install the new lug studs, we first need to remove the old ones which can be done by carefully hitting the top of the stud with a hammer. Then once the old studs are removed we can install the new ones....
  view full answer...
• How to Attach Spare Wheel/Tire to the Curt Trailer Hitch Mounted Spare Tire Carrier 31006
  If you are using the Aluminum Lynx Trailer Wheel part # LHSL311 then your trailer will have 1/2-20" lug studs therefore, in order to secure your spare wheel/tire to the Curt Trailer Hitch Mounted Spare Tire Carrier part # C31006 I recommend using multiples of the Wheel Stud part # 165995 and the Chrome Trailer Wheel Lug Nut part # 12CLN-L. The lip on the lug stud should be sufficient to attach to the plate so additional washers will not be needed. If you were ever to break a lug stud or...
  view full answer...
• Stud Installation on Dexter Axle Trailer Hub Assembly # AKIHUB-440-2-1K
  I contacted our representative at Axle Tek and he informed me that the studs on the Trailer Hub Assembly, part # AKIHUB-440-2-1K are Drive In Studs, so they are either pressed or hammered in. This hub assembly will work with your 2000 lb Axles, 4 on 4 bolt pattern, with L44643 Bearings. I informed him that you are planning to remove the studs and replace them with longer studs. He recommended Wheel Stud, part # 165995, which is about a 1/2 inch longer than the studs on part # AKIHUB-440-2-1K. To...
  view full answer...
• Torque Rating for Trailer Hub Wheel Studs for 1/2 Inch Lug Nuts
  Wheel stud # 165995 is a drive-in wheel stud meaning it gets driven into a hub with a mallet or similar tool. Since it is a 1/2 inch the lug nuts, when tightened, 1/2 inch lug nuts should be at 75 to 85 foot pounds on 8 inch to 14 inch steel or aluminum wheels, 90 to 120 foot pounds for 15 to 16 inch steel wheels, and 90 to 100 foot pounds on 15 or 16 inch aluminum wheels.
  view full answer...
• Are All 1/2 Inch Lug Studs Fine Thread 20 Threads Per Inch
  The majority of drive-in lug studs like part # 165995 use a fine thread but only a 1/2"-20 tpi (threads per inch), not a 1/2"-32 tpi. I am not aware of any lug nuts we offer that will fit a 1/2"-32 tpi but what you can do is measure the bolt you have now to see if there are in fact 32 threads per inch as opposed to the much more common count of 20 threads per inch. If you do have 1/2"-32 tpi bolts then you will need to go to the hardware store in order to find a compatible nut but if you...
  view full answer...
  
• How to Determine Wheel Stud Replacement for Boat Trailer Hub H-1377
  Based on my research it looks like you have a hub for a 3,500 lb axle, though we do not have any exact reference for an H-1377 hub to go off of. You only need to know whether your hub uses screw-in or drive-in studs as well as the length of stud you need. This is going to require you to remove one of your wheel studs and if they are drive-in they will have a head on them like the 1/2" x 2-1/2" Wheel Stud # 165995. A screw-in like the 1/2" x 2" Wheel Stud # 25-53 will be completely threaded. I...
  view full answer...
• What Size Hole to Drill for Installing Redline Replacement Drive-In Trailer Wheel Stud # 165995
  My contact at Redline advised that their Replacement Drive-In Trailer Wheel Stud, part # 165995, which has a spline diameter of 0.54 inches, can be driven into a hole diameter from 0.50 inches to 0.52 inches. My contact at Dexter advised that if you are able to hammer the old stud out of the hub (from the front, opposite to how it was installed) without deforming the hole or changing its size, then the replacement should fit properly without any need to drill the hub. If needed a punch...
  view full answer...
• Wheel Stud Replacement for 5200 lb Trailer Axle
  Based on the dimensions you said you needed the Wheel Stud # 165995 would be exactly what you'd need.
  view full answer...
• Availability Of A 1/2 Inch Wheel Stud That Is 2-1/2 Inches Long
  The only 1/2" x 2-1/2" long wheel studs we offer are the: - Wheel Stud # 165995. These are drive-in wheel studs that are 1/2" in diameter, have 20 threads per inch, and are grade 8 rated. You'll also want to measure the diameter of the splines, the length of the splines, as well as the overall length of the stud.
  view full answer...
• What Grade are Redline Wheel Studs # 165995
  Yes, the six radial lines or markings on the top of the head indicate that the Drive In Wheel Stud 1/2" x 2-1/2", # 165995 is in fact a grade 8.
  view full answer...
  
• Availability of 2-1/2 inch Long Trailer Wheel Stud
  The closest option we have would be the part # 165995 which is overall 2-1/2 inches long, has a knurl diameter of .54., is 1/2-20, and has a spline length of .68 inches.
  view full answer...
• Replacement Drive In 1/2"x20 Wheel Studs
  I may have an option but we do not offer a 2 1/4" long 1/2"x20 wheel stud. The closest option we have is Wheel Stud - Drive In 1/2" x 2-1/2" # 165995 which is 2.5" long, spline length is .68", base length is 1.38" and is 1/2" x 20 TPI. This is wheel stud is sold in a quantity of one. I included a video of the Wheel Stud # 165995 for you to take a look at.
  view full answer...
• Replacement Drive-In Wheel Stud for Hub and Drum Assembly for 5K/6K E-Z Lube Trailer Axles
  For a replacement drive-in wheel stud for hub and drum assembly # 8-201-9UC3-EZ you will need to use stud # 165995. This drive-in stud is 2-1/2 inches long.
  view full answer...
• Replacement Wheel Stud For A Aljo Travel Trailer
  The closest option I was able to find is the Wheel Stud # 165995 which measures 2-1/2" long, is 1/2" in diameter, and has 20 threads per inch.
  view full answer...
• Replacement Studs for a Trailer Hub and Drum Assembly # 42866UC3-EZ
  The replacement wheel stud you would need for your Trailer Hub & Drum Assembly # 42866UC3-EZ would be a Wheel Stud # 165995. Also, when you install the wheels onto your hubs you will want to torque them down to spec and then after 50-100 miles you will want to re-tighten them to the specified torque rating to prevent having the studs break in the future.
  view full answer...
• Replacement Stud Recommendation for Dexter 6k Rated Trailer Hubs
  For Dexter 6k rated hubs like the part # 8-201-9UC3-EZ you will need to use stud # 165995. This drive-in stud is 2-1/2 inches long.
  view full answer...
• Replacement Wheel Studs for the Trailer Hub and Drum Assembly # AKHD-655-6-K
  The wheel studs of the Trailer Hub and Drum Assembly # AKHD-655-6-K are 1/2 inch diameter. I checked with Dexter and the recommended replacement studs for this hub are the part # 165995.
  view full answer...

Do you have a question about this Accessories and Part?