Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Check grease levels at a glance with the blue auto-check ring. Stainless steel Bearing Buddies maintain light grease pressure inside the hub to protect your bearings, even when submerged, while the zerk fitting makes adding grease quick and easy.
Features:
Specs:
Replace your existing grease cap with a Bearing Buddy for an easy way to monitor and maintain the grease level in your axle hub. Use a grease gun to add grease through the zerk fitting. As the hub fills, the spring-loaded piston moves outward, raising the blue auto-check ring. When the blue ring is 1/8" above the steel retaining ring, the hub is properly filled.
The O-ring inside the barrel of the Bearing Buddy maintains a seal from the outside. The pressurized grease inside the hub helps prevent water from entering and contaminating the grease. Bearing Buddy also includes an automatic pressure-relief feature to help prevent overfilling and damage to the inner seal. Once the hub is full, excess grease seeps around the edges of the piston and into the barrel while the blue auto-check ring remains raised.
Check the blue auto-check ring to see when it's time to add grease. If the ring has receded below or is flush with the steel retaining ring, more grease is needed. If the lip of the blue ring is 1/8" above the steel retaining ring, the hub is properly filled.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the Bearing Buddy stainless steel bearing protectors for the 2.441 hub boar and it is for a quantity of two. Now these are great for marine applications. The stainless steel construction provides the best in corrosion resistance, and the design makes the Bearing Buddy an easy way to protect your bearings by keeping water out and ensuring enough grease is in the hub. Basically, these will replace your standard grease caps that are on your axle hub and provide your trailer bearings with premium protection. Basically, they'll prevent wheel bearing failure by providing an easy way to control the grease volume in your axle hub.
As we mentioned, they'll keep the water and dirt out of your hubs and bearings, so it allows your boat trailer wheels to be completely submerged. It'll stop corrosion and pitting on the bearings. If you notice right here, it has a grease zerk fitting. It's an easy accessible gorged grease zerk fitting, so it makes adding grease to the bearings very quick and simple. All you have to do is when this cap's on it, you remove the cover, put your grease gun on there, pump the grease in there.
Now it will maintain slight control pressure, about three PSI, using a spring loaded piston, preventing the water from entering the hub. Basically, it'll prevent overfilling and rear seal damage with the automatic pressure relief feature. Basically the grease is gonna seep around the piston edges and into the barrel when it's full. Now this is constructed of stainless steel, so it does ensure longer lasting fit, better than your plastic or aluminum products. We mention the covers right here.
Once these are installed, you just put your grease in and you're done. You just put the rubber protective cover over it to protect it to keep any elements from getting into it. Now this does install easily by putting it on the hub and then what we recommend is usually you'll put this onto your hub and then put a block of wood on it and then tap on it and you'll tap it in place by using a hammer on the block of wood. This part is made in the USA, again, the specs. This will fit a 2.441 hub board diameter.
Now it is also available in other diameters to fit your hub size. We do sell 'em separately on our website. This part here is designed to work with outer bearing model numbers, LM 67048, Y15123, and others, which are commonly found on 4,400 pound, 5,200 pound, 6,000 pound, and even 7,000 pound Dexter axles. But that's gonna do it for a look at the Bearing Buddy stainless steel bearing protectors for the 2.441 hub bore.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews

Jesse M.
10/26/2026
Thanks for another great review, Clark! Glad the Bearing Buddies fit perfectly and give you that extra peace of mind when launching your boat. Keeping those bearings protected is always a plus, and the classic redneck-approved look is just a bonus! Happy boating!

Brian
7/26/2026
Working great, holding up very well. Great quality and excellent value.


Gwendolyn Y.
4/28/2025
Thanks for saying that, David! I love knowing that we are your go-to :D
Do you have a question about this Trailer Bearings Races Seals Cap?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.








Gwendolyn Y.
4/30/2026
They look great, Lex. Will make maintenance a breeze now.