What Is The Largest Buddy Bearing Currently Available
Updated 03/05/2026 | Published 03/02/2026 >
Products Featured in This Question
Question:
I have a three axle trailer for my boat, I would like to put bearing buddies on all of my bearings. I was told that the largest size bearing buddy is too small and that there is an adapter that makes it bigger to the right size. I don’t know what size it is offhand. I don’t know if there’s a whole bunch of different sizes, but I can’t imagine they’re being a ton. Hopefully this makes sense and hopefully somebody can send me a link or something to the two parts that I need.
asked by: Jared B
Expert Reply:
Hey, Jared. Thanks for reaching out.
The biggest Bearing Buddy we have has an outer diameter of 2.441", that's part # BB77SR. To find the right Bearing Buddy you would want to measure the inside diameter of the hub bore where the grease cap presses in.
There aren’t any adapters made to allow a smaller Bearing Buddy to fit into a hub with a larger bore. There are spindle sleeves. Those slide over the seal surface area of the spindle, the smooth part where the grease seal rides. Over time that part of the spindle gets pitted and worn out causing grease leaks. A spindle sleeve would fix that.
It’s not truly an adapter, but it’s the only hub or spindle component that might be confused as one.
What kind of trailer are you wanting to but the Buddy Bearings on?
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 2441A-SS w/ Auto Check - Stainless Steel - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.44 Inch
- 4400 lbs Axle
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- Bearing Buddy
more information >
Continue Researching
- Q&A: Replacing Load Rite Boat Trailer Disc Brakes With Slip-On Rotors
- Q&A: Replacement For Parallax Model 555 Power Converter
- Q&A: Correct Replacement For A Parallax 555 Series Converter
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Q&A: What Bearing Kit and Replacement Parts for My Dexter Vault do I Need for 3,500 Axle Skeeter Boat?
- Q&A: Trailer Hitch Extension and Weight Distribution for 2015 Ford F350 With Truck Bed Camper
- Q&A: Bearing Kit for 6,000 lb Dexter Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Measure a Trailer Axle
- Article: Most Popular Wheel Bearings
- Article: Gooseneck to 5th Wheel Adapters
- Article: Thank you!



Jared B.
3/4/2026
All the bearing buddies I have found are to small. I was told there was an adapter for the largest bearing buddy to make it a little bit bigger. Not smaller.