bing tracking image
  1. Trailer Brakes
  2. Hydrastar
  3. Disc Brakes
  4. 3500 lbs Axle
  5. Rotor
  6. 14 Inch Wheel
  7. 15 Inch Wheel
Hydrastar Disc Brake Kit w/ Actuator for Single Axle Trailers - Slip On Rotor - 5 on 4-1/2 - 3.5K
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Hydrastar

Hydrastar Disc Brake Kit w/ Actuator for Single Axle Trailers - Slip On Rotor - 5 on 4-1/2 - 3.5K

Part Number: HYD62FR
In Stock
$1,214.49
Trailer Brakes
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Upgrade to disc brakes with 2 rust-resistant slip-on rotors and an electric-over-hydraulic actuator that works with your existing brake controller, and get incredible braking performance. Includes hydraulic lines and fittings. Great Prices for the best trailer brakes from Hydrastar. Hydrastar Disc Brake Kit w/ Actuator for Single Axle Trailers - Slip On Rotor - 5 on 4-1/2 - 3.5K part number HYD62FR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Q & A (0)
  • Photos

Hydrastar Trailer Brakes - HYD62FR

Highlights

  • Stops Smoother and Shorter: Electric-over-hydraulic system delivers fast, even braking for safer control.
  • Bolts Right On: Slip-on, over-the-hub rotors mount using existing wheel bolts—no hub swap needed.
  • Built to Resist Rust: Dacromet-coated rotors and calipers stand up to moisture and corrosion.
  • Ready-to-Install Kit: Includes actuator, 3.5K disc brake parts, and single-axle line kit with fittings.
  • Rated for 3,500-lb Axles: Works with 14" or 15" wheels and 5 on 4-1/2" bolt pattern hubs.
  • Runs Cooler Under Load: Vented cast iron rotors dissipate heat to reduce fade and wear.

Features to know about

Upgrade Old Brakes for Real Stopping Power: Electric-Over-Hydraulic Disc System

If your trailer still runs drum brakes, this Hydrastar kit is a big step up. The electric-over-hydraulic actuator ties into your existing brake controller and gives you disc brake response that’s fast and consistent, even at highway speeds. The complete kit upgrades one single axle rated at 3,500 lbs and includes two Dacromet-coated disc brake end kits, calipers, mounting brackets, and hardware for a stronger, smoother stop every time.

Simplify the Job: Slip-On Rotors Fit Right Over Existing Hubs

Swapping to discs doesn’t have to mean replacing everything. These over-the-hub Dacromet-coated rotors simply slip over your standard idler hubs and use your existing wheel bolts to hold them in place. If you ever damage just the hub or rotor, you can replace that part alone instead of the entire assembly. It’s a clean, DIY-friendly design that makes installation and future maintenance straightforward.

Stay in Control on Long Grades: Vented Rotors Keep Brakes Cool

Long descents and heavy loads generate serious heat, but these cast iron rotors are vented to move air through the core and shed heat fast. That means less risk of fade and more consistent braking under pressure. Built to SAE specifications, the cast iron design provides reliable friction performance for confident control in demanding conditions.

Complete Kit for a Clean Install: Everything You Need for One Axle

No need to chase down fittings or lines—the kit includes a hydraulic single-axle brake line kit with (1) 188" long brake line, (1) 70" long brake line, (2) 21" male/male rubber flex lines, a 3/8" brass T-fitting, a 3/8" brass union fitting, nylon hose clamps, and self-tapping screws. With hardware sized for 1/2" wheel studs and a 5 on 4-1/2" bolt pattern, it’s ready to bolt up and go.

Built Strong and Backed by Warranty: Reliable Performance Season After Season

Every part of this setup is engineered for dependable use—Dacromet protection fights corrosion, the actuator delivers smooth pressure with quick response time, and the calipers only have one moving part for simple upkeep. The actuator carries a 2-year warranty and the brakes and components carry a 1-year warranty, giving you solid assurance that your upgrade is built to last.

Specs

Weight and Capacity

  • Axle capacity: 3,500 lbs

Dimensions

  • Bolt pattern: 5 on 4-1/2"
  • Rotor diameter: 10"
  • Wheel stud diameter: 1/2"

Actuator PSI

  • 1,600 PSI

Warranty

  • Actuator: 2 years
  • Brakes and components: 1 year

Bearings, Race, and Seal Information (Parts Sold Separately)

  • Inner bearing: L68149
  • Outer bearing: L44649
  • Inner race: L68111
  • Outer race: L44610
  • Grease seal inner diameter: 1.719"
  • Grease seal outer diameter: 2.565"

E3K-S1SO Hydra Star Disc Brake Kit with Electric-Over-Hydraulic Actuator for Single Axle Trailers - 10" Diameter Over The Hub Rotor - 3,500-lb Rating





0
0

See what our Experts say about this Hydrastar Trailer Brakes

Do you have a question about this Trailer Brake?


Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Wilson B
Updated by:
Wilson B
Employee Dawn Z
Updated by:
Dawn Z
Employee Jeremy F
Written by:
Jeremy F

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.