See what our Experts say about this CE Smith Boat Trailer Parts

• Best Kayak Trailer For Carrying Two NuCanoe U10 41" Wide Fishing Kayaks
  Hey Jerry, thanks for reaching out. Sure thing! We do have kayak trailer options that will work really well for carrying your two NuCanoe U10s. We have options with extra-long crossbars which will work great for accommodating those 41" wide kayaks. Here are our best options for that: - Malone LowBed MicroSport Trailer for 2 Heavy Kayaks - 7' Bunks - 800 lbs # MAL25FR - Malone MicroSport Trailer for 2 Heavy Kayaks - 7' Bunks - 800 lbs # MPG461B2 Both of these have 78" crossbars, so you'll...
  view full answer...
• Option For Karavan Trailer Winch Stand
  Hi Michael, While we don't have any way of knowing what winch stand goes on any specific trailer, it is possible we have an option for a winch stand for your Karavan trailer. The only option we have for a stand is the CE Smith Winch Stand # CE31013G. This is a 30" tall stand and will clamp around a 2" wide trailer tongue.
  view full answer...
• Can A Winch Stand/Post Be Mounted Completely Vertically?
  Welcome back, Mike! There is absolutely no reason you couldn't mount a winch on a completely straight up and down post/stand. I don't actually know why they are basically always angled, though it probably has to do with the hull of the boat they are winching onto the trailer, but that's just a guess. Anyway, I have the three we currently carry listed below: Hydrastar Winch Stand w/ Seat - 3" x 4" Post - 36" Tall - 60 Deg - Galvanized # HYD69ZR Hydrastar Adjustable Winch Stand Assembly...
  view full answer...
• Can I Add A Winch Stand And Winch To The Malone LowBed Trailer?
  Hey Beth, welcome back. Yes, you can usually move both the spare tire mount and the kickstand forward on a Malone LowBed as long as there is room. Those components are clamped to the tongue, so physically sliding them closer to the coupler is doable, just make sure the tire doesn't overcrowd or obstruct the coupler. As for adding a winch, that’s a pretty common setup for kayaks and small boats, and the tongue is the right place for it. You just want enough clear space to mount a winch...
  view full answer...
• Recommended Rubber Bow Stop
  Hey Michael. We have quite a few options for standard rubber bow stops but which one you need is going to come down to how wide your current uprights are. One of the Yates Y-Style Bow Stop for Boat Trailers like the 6-1/2" span item # YR6Y33-4 is most likely what's going to work best. I have linked our entire selection below so you can match up what size you need to your uprights. We do not have any brackets for these bow stops.
  view full answer...
• Best Way To Add Hand Winch To Yakima EasyRider Kayak Trailer
  Hello Dennis, thanks for reaching out. I do have a solution for adding a hand winch to your Yakima EasyRider trailer. The best way to do this is with the CE Smith Winch Stand # CE31013G. This bolts to the 2" tongue and gives you a mounting location for a winch. For the winch I recommend the MaxxTow MaxxHaul Hand Winch # MT50156. This comes with a 20' strap and has a 1,200 lb capacity. Should make loading your fishing kayak a lot easier. What has been your favorite fishing trip so far...
  view full answer...
• Recommended Replacement Winch Stand for a Boat Trailer
  Hey Matt, if you have a standard 2" trailer tongue then the CE Smith Winch Stand # CE31013G will work fine as a replacement. This does not have a weight capacity, but it is made of 12 gauge steel which is pretty strong stuff. Our contacts over at CE Smith have confirmed in the past that this stand can with stand over a 1,000 lbs easily, but the weight of the boat won't be resting entirely on the post so it can handle much more than that. Take your boat to any cool places? I used to...
  view full answer...
• Availability of Part Number 31013
  Hey Lou, so we have two replacement parts that reference the number 31013. We have the winch stand part # CE31013G and the Curt front hitch # C31013. Do you have something different?
  view full answer...
• Availability of Winch Stand For 3" Wide Trailer Tongue
  Hello Todd, thanks for reaching out. The CE Smith Winch Stand # CE31013G is for a 2" tongue, and this is the only size winch stand we currently offer. Sadly, we do not have one for a 3" tongue. We do have a universal winch mount bracket, part # DL24110 that could be attached to a 3" tongue with a bit of modification. This would be our only option for a 3" tongue. This mount will fit most hand winches up to 2,000 lbs in capacity. Reply below and let me know if you have any questions.
  view full answer...
• Looking For A Marine Grade Hub And A Winch For My Malone Trailer
  Hey Fred, In terms of a hub we should have an option for you. For the typical size hubs on that trailer we offer 2 with different bearings. You should be able to find in your manual what bearings are used on that trailer so I can make sure we get the right one that will fit. If you can get me those bearing numbers I will figure out what hub you need. For a winch you can pair the CE Smith winch stand # CE31013G with the Buyers Products winch # 337HW800S and loading and unloading will...
  view full answer...
• Can Winch be Added to Malone MicroSport Trailer
  Since the Malone Microsport trailer part # MPG460G has a tongue width of 2 inches you could use the tower kit part # CE31013G which is 30 inches tall as this is designed to fit 2 inch channels. Then you could use a winch like the Buyers Products part # 337HW800S.
  view full answer...
• Recommended Winch and Mounting Bracket for a Malone Microsport Trailer
  Yes, you can add a winch to the Malone LowBed MicroSport Trailer item # MPG464-LB. You will want to use the CE Smith Winch Stand item # CE31013G. This will fit on the Malone trailer's 2" tongue. This stand is 30" tall and made of galvanized steel. I recommend using the MaxxTow MaxxHaul Hand Winch item # MT50156. This winch has a 20' strap and a 1,200 lbs capacity. To upgrade the tires you will want the Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire item # AM10130. This is a class...
  view full answer...
• Can Winch Be Added to Malone EcoLight Sport Trailer
  Since the Malone EcoLight trailer part # MAL53FR has a tongue width of 2 inches you could use the tower kit part # CE31013G which is 30 inches tall as this is designed to fit 2 inch channels. Then you could use a winch like the Buyers Products part # 337HW800S.
  view full answer...
• How To Replace a Knot Autoflex Winch and Bow Roller Assembly On a Boat Trailer
  I do have a solution for you but we don't offer any integrated winch and bow roller setups like the Knot Autoflex. Therefore, you'd have to purchase a winch stand assembly like the CE Smith Winch Stand part # CE31013G which bolts onto the tongue and allows you to mount a winch like the Fulton F2 Fully Enclosed Trailer Winch part # FW20000301 and bow roller like the Bow Roller Assembly part # YR300B-325B when using the CE Smith Bow Roller Bracket for Winch Stands part # CE31005PG. You may...
  view full answer...
  
• Recommended Trailer for a 16ft inflatable Fishskiff Boat
  I have a solution for you but the CE Smith Multi Sport Plus Boat and Kayak Trailer item # CE48870 is not suitable for your 16' SeaEagle Inflatable Fishskiff. That trailer can only carry a boat up to 14' and as you pointed at it is quite a bit more narrow. I recommend the Malone MegaSport Kayak Trailer item # MPG535. This trailer can handle boats up to 20' long and has 86" wide crossbars. I have linked a review video below. You will want to add the Bunk Kit for Malone Trailers item #...
  view full answer...
• Looking for a Replacement Handle for a Knott Autoflex Hand Winch
  If you were looking for a replacement handle, the hole opening on the Replacement Quick Attach Winch Handle for Dutton Lainson Winch - 9-1/2" # DL70330 will measure 15/32" by 5/8" and looks like it will be a good replacement for your Knott Autoflex winch. I do suggest measuring to confirm this though. However, if you are referring to the shaft/handle to change from one speed to the other, you will need to contact Knott directly. This is not a winch we carry so I cannot say if any of our...
  view full answer...
  
• Replacement for Knott 6S5810.001 AutoFlex 2500 lb 2-Speed Trailer Winch
  We don't carry the Knot Autoflex couplers, but we do have a solution that could work for you. You could assemble a solution of parts we offer that would consist of: • JIF Marine 2500 lb 2-speed hand winch, part # 315-W2500D • Winch Stand, part # CE31013G which is compatible with 2 inch wide pole tongues • Bow Roller Bracket, part # CE31005PG • 3 Inch Bow Roller, part # YR300B-325B
  view full answer...
  
• Can Winch be Added to Malone LowBed MicroSport Trailer
  Not ridiculous at all; you can add a winch to the Malone LowBed MicroSport Trailer for 2 Heavy Kayaks # MAL25FR. Just use the CE Smith Winch Stand # CE31013G and Buyers Products Trailer Hand Winch # 337HW800S.
  view full answer...
• Picture of CE Smith Winch Stand # CE31013G Installed on Trailer
  I attached a picture that we recieved from a customer that shows the CE Smith winch mount # CE31013G installed and in use on a trailer for you to check out.
  view full answer...
  
• How To Convert a Boat Trailer from Center Rollers to Bunk Rollers
  Yes, it is possible to switch from center rollers to bunk rollers on a boat trailer. For this, you will first need to remove the center rollers and then you can install a set of bunk rollers, part # CE27710 along with part # CE10000G-4 to support the hull. Then, in order to support both the port and starboard sides you can use part # CE27600. I have attached a photo of a similar setup with bunk boards instead of bunk rollers for the hull. In addition to the above you will also need to...
  view full answer...
  
• How Does the CE Smith Winch Stand # CE31013G Mount to Trailer
  To mount the CE Smith Winch Stand # CE31013G on a trailer requires you to slip the lower portion with the holes drilled through it over the pole tongue of your trailer. The various holes are there to allow you to match the correct height and angle that the trailer calls for. I attached a picture of a similar product that uses basically the same style of attachment to help you visualize how the stand would mount. You would need to provide nuts and bolts that would be long enough to pass...
  view full answer...
  
• Adding a Winch Stand and Bow Stop to a Calkins Boat Trailer
  One of the keys for a winch mount is the width trailer tongue they fit. Mount # CE31013G fits on 2 inch wide trailer tongues so if that is what you have then this is a great option for the trailer and winch.
  view full answer...
• Parts Needed For A Spartan SB140 Boat Trailer
  Yes, I can help you find parts for your Spartan SB140 boat trailer. I will start with the winch. The 2-Speed Boat Trailer Winch with 20' Strap and Brake - 3,200 lbs, part # 315-W3200D, is a 2-speed manual winch. It can winch up to 3,200 lbs. It will attach directly to the winch stand. The CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide, part # CE31013G, is a perfect addition to mount your winch to on your boat trailer. It will mount onto your boat trailers 2" tongue. Once...
  view full answer...
• All Parts Needed To Add A Winch To A Kayak Trailer
  I included a winch that will be very comparable to what comes on the CE Smith Multi Sport Plus Boat and Kayak Trailer # CE48870, but we do not have that exact model. I should also mention that there is no hardware included in this list, but everything else is. CE Smith Bow Roller Bracket for Winch Stands # CE31005PG CE Smith Winch Stand # CE31013G Yates Bow Roller - 3" Long - 1/2" Shaft # YR3143-4 Fulton Single Speed Trailer Winch - 7" Long Handle, 12' Strap - 900 lbs # F142007
  view full answer...

Do you have a question about this Boat Trailer Part?